Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

Asus M4A88T-V EVO/USB3
https://vlab.su/viewtopic.php?f=224&t=71963
Страница 1 из 1

Slave82 [ 11 фев 2018, 18:51 ]
Заголовок сообщения:  Asus M4A88T-V EVO/USB3

Hello colleagues, I have a problem with the title board.
When I put a Pc tester but code only reset the diodes every 2 seconds!
I changed the south bridge but the malfunction remained the same, do I have a suggestion where to go for a malfunction, in advance thanks!

I apologize that I have to write in englisch this way because from the Serbian to Russian translation it is very bad

OzzyStr [ 11 фев 2018, 19:52 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

Why so soon change SB? Did you the BIOS rewrite at first or after?

Slave82 [ 11 фев 2018, 20:25 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

Regards, the indication says that something in the reset circle is invalid!
First of all, I changed the bios chip, but the same malfunction remained as I assumed.

OzzyStr [ 11 фев 2018, 20:44 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

Have you been running a BIOS dump from a work card or from an official website? The website does not fit in this case.
Find the BIOS firmware from a workable card and flash it on the programmer.
---------- Добавлено спустя 8 минут 52 секунды: ----------
I have such a board, it also does not start. I dumped the BIOS from it, but I do not know how it works, I can drop it on the email.

aleksros [ 11 фев 2018, 21:02 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

With these features, the south bridge is not at all. if the reset every 2 seconds -
1. Check the power of the north bridge,
2. check the resistance of the connector capacitors of the north and south bridge (alink signal) 16 pcs, 8 pcs near the south bridge and 8 pcs near the north bridge
3. solder the socket
4. change the north bridge
---------- Добавлено спустя 6 минут 44 секунды: ----------
OzzyStr писал(а):
The website does not fit in this case.

это почему вы так решили? там нормальный биос в .rom формате, никак не .cap! можно шить программатором и все будет работать (только мак адрес придется прописать)
---------- Добавлено спустя 34 минуты 59 секунд: ----------
The capacitors look like this, which should be checked.

OzzyStr [ 11 фев 2018, 22:16 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

Спорить не буду, попробую "с сайта" свою прошить. Но именно для этой модели на форуме дампа не было.
(моя плата включается, но не стартует, и не выключается с кнопки- мульт думаю менять)

Slave82 [ 20 фев 2018, 13:08 ]
Заголовок сообщения:  Re: Asus M4A88T-V EVO/USB3

Hi, I did not have time, so I changed the Bridge Bridge yesterday and the board worked!
He had a gigabyte board with the same indications a long time ago, with it was a defective sout bridge, which was why he was the first to change it.
I thank everyone for help.

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/