motherboard power on?
| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| msi z170a Boardview https://vlab.su/viewtopic.php?f=237&t=95473 |
Страница 1 из 2 |
| bokin021 [ 16 окт 2019, 15:50 ] | |
| Заголовок сообщения: | msi z170a Boardview |
boardview msi z170a ? |
|
| jocker [ 16 окт 2019, 22:58 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
project name ? ms-xxxx ?? |
|
| bokin021 [ 17 окт 2019, 09:43 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
MS-7977 model |
|
| aleksros [ 17 окт 2019, 12:41 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
bokin021 check email |
|
| bokin021 [ 17 окт 2019, 12:48 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
i cant open file with boardview Posted after 14 minutes 41 second: thanks everything is ok..Thanks so much!! Posted after 20 minutes 36 seconds: Please can you help me with VRM EN signal ? |
|
| aleksros [ 17 окт 2019, 13:51 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
check g1 q201, g1 q202. both signal must be high. |
|
| bokin021 [ 17 окт 2019, 13:56 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
0v on both transistor |
|
| aleksros [ 17 окт 2019, 14:00 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
vccio and slp_s3 are present? |
|
| bokin021 [ 17 окт 2019, 14:04 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
it same 0v no signal at all |
|
| aleksros [ 17 окт 2019, 14:07 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
| motherboard power on?
|
|
| bokin021 [ 17 окт 2019, 14:07 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
yes post code 00 i change bios Posted after 9 seconds: yes post code 00 i change bios |
|
| aleksros [ 17 окт 2019, 14:11 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
what marking chip bios? how are you programming bios? what programmer are you use? what bios are you programming? |
|
| bokin021 [ 17 окт 2019, 14:16 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
mxic 25l12873f from offical site https://www.msi.com/Motherboard/support/Z170A-GAMING-M5 programmer ch341a soft as programmer CPU I7-6700 |
|
| aleksros [ 17 окт 2019, 14:25 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
bokin021 писал(а): ch341a may be not support quad mode for mxic 25l12873f. use ezp2010 or tl866 II plus programmer |
|
| bokin021 [ 17 окт 2019, 14:27 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
i programm with old one bios I mean back up it same ,with this programmer i did same board before and everthing was ok.. |
|
| aleksros [ 17 окт 2019, 14:39 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
change bios chip and try again before flashing bios motherboard was it ok? |
|
| bokin021 [ 17 окт 2019, 14:42 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
no it was same ,without vr enable Posted after 7 seconds: no it was same ,without vr enable |
|
| aleksros [ 17 окт 2019, 14:44 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
take off cpu and install jumper j2. switch on motherboard and check vcore. |
|
| bokin021 [ 17 окт 2019, 14:55 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
no it same 0v Posted after 5 seconds: no it same 0v |
|
| aleksros [ 17 окт 2019, 15:07 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
it's bad... you have broken cirkuit vcore, no signal vrm_en, no signal slp_s3 and I don't understand how MB power on without slp_s3... vpp is present? (choke8) |
|
| bokin021 [ 17 окт 2019, 15:12 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
slp_s3 it is 3.3 v pch 1.01v maybe i did mystake when i write you Posted after 3 minutes 37 seconds: (choke8) is ) 0v |
|
| aleksros [ 17 окт 2019, 15:25 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
if pin5 u67 is hi - change u67 and mother will be live )) |
|
| bokin021 [ 17 окт 2019, 15:28 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
Thell me what is VPP phase ? Posted after 2 minutes 20 seconds: i have 2.9v on en pin 5 |
|
| aleksros [ 17 окт 2019, 15:33 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
VPP - voltage only for DDR4, must be 2.5v it first from secondary voltages, without him no more voltages on MB |
|
| bokin021 [ 17 окт 2019, 15:36 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
i from labaratory supply 2.5v touch coil and now post code start |
|
| aleksros [ 17 окт 2019, 15:42 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
bokin021 писал(а): i from labaratory supply 2.5v touch coil and now post code start don't do that anymore!   if you open boardwiev - find pin7 u67 - it signal for enable next voltages, but not vpp voltage! |
|
| bokin021 [ 17 окт 2019, 15:47 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
i did that on choke 8 and board normal swich on but stuck on code 29 |
|
| aleksros [ 17 окт 2019, 15:52 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
change U67. don't torture mother. |
|
| bokin021 [ 17 окт 2019, 15:53 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
ok thank you so much myou really help me.. 
|
|
| aleksros [ 17 окт 2019, 16:00 ] | |
| Заголовок сообщения: | Re: msi z170a Boardview |
for thanks there |
|
| Страница 1 из 2 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|