Текущее время: 19 апр 2024, 03:06




 Страница 1 из 1 [ Сообщений: 6 ] 
Автор
Сообщение
[ТС]
 Заголовок сообщения: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 15 мар 2019, 15:40 
Я тут случайно
Я тут случайно
Аватара пользователя
Зарегистрирован: 21 авг 2017, 16:15
Наличности на руках:
6.02

Сообщения: 5
Откуда: Влг
Добрый день форумчане. После недавно воскрешенного саундбара от Филов, приехал и телек 42pfl6877t/60. Говорят раньше через раз включался, теперь совсем тишина. Вскрытие показало, что пациент таки пытается включиться, дежурка у него стабильно 3.3V, 12V линии поднимаются и держатся, телек делает несколько попыток запуска (6-8), керамический радиатор греется, не более 50гр, рука терпит, затем остановка и начинает мигать 2 раза с перерывом. Проц остывает.
К блоку питания вопросы закончились, перешел к main. Напряжения то же поднимаются и ничего кроме проца не греется.
Основные замеры проводил на конденсаторах, по ходу дела буду дополнять, может потомкам пригодится.
2uv7 - 1.2V
2j3k 1.5V
2j27 1.5v
2ja3 3.3v
50c2 1.1V
2upg 1.5V
При попытке подключения через UART видны только прерывания на перезапуск <0>
Так же основательно потекла термопрокладка, плата была обмазана с 2х сторон, включая 7j04, 7j03, 7kc0. Может это и послужило виной, нужно разобраться. Кто может, знает прошу помочь в этом деле.
http://tv-remont-spb.ru/files/Philips_QFU2.1E_LA.rar - SM
https://yadi.sk/i/ch99Kos6Q9reXQ - фото платы
UART1
UART: <0><0><0>0xF977F37F cycle now
Jump to 0xB5034100 02 key is used
Getting Hash...
0xBFC00000 01 10 00 00 52 55 00 0F 36 74 B3 80 00 00 00 00
Hash:
0xB50345F0 1D 86 AE FF E3 71 65 8F 13 61 12 66 C4 5F 8D B0
Buffer for BIG NUM is at B5034E2C, size is 0440.
pass!
load begin!
nand.c:nand_readwithinpage

0x00000000 page is reading
0x00000004 0x00000007 0x00000000 StartUnit/EndUnit/offset
Reading out data:
04 unit:

waiting ECC result ready
00 bits error in the unit.
05 unit:

waiting ECC result ready
00 bits error in the unit.
06 unit:

waiting ECC result ready
00 bits error in the unit.
07 unit:

waiting ECC result ready
00 bits error in the unit.

nand.c:nand_readwithinpage

0x00000001 page is reading
0x00000000 0x00000003 0x00000000 StartUnit/EndUnit/offset
Reading out data:
00 unit:

waiting ECC result ready
00 bits error in the unit.
01 unit:

waiting ECC result ready
00 bits error in the unit.
02 unit:

waiting ECC result ready
00 bits error in the unit.
03 unit:

waiting ECC result ready
00 bits error in the unit.

nand.c:nand_readwithinpage

0x00000001 page is reading
0x00000004 0x00000007 0x00000000 StartUnit/EndUnit/offset
Reading out data:
04 unit:

waiting ECC result ready
00 bits error in the unit.
05 unit:

waiting ECC result ready
00 bits error in the unit.
06 unit:

waiting ECC result ready
00 bits error in the unit.
07 unit:

waiting ECC result ready
00 bits error in the unit.

load end!
K

UART2
<0><0><0><0><0>0xF977F383 cycle now
Jump to 0xB5034100 02 key is used
Getting Hash...
0xBFC00000 01 10 00 00 52 55 00 0F 36 74 B3 80 00 00 00 00
Hash:
0xB50345F0 1D 86 AE FF E3 71 65 8F 13 61 12 66 C4 5F 8D B0
Buffer for BIG NUM is at B5034E2C, size is 0440.
pass!
load begin!
nand.c:nand_readwithinpage

0x00000000 page is reading
0x00000004 0x00000007 0x00000000 StartUnit/EndUnit/offset
Reading out data:
04 unit:

waiting ECC result ready
00 bits error in the unit.
05 unit:

waiting ECC result ready
00 bits error in the unit.
06 unit:

waiting ECC result ready
00 bits error in the unit.
07 unit:

waiting ECC result ready
00 bits error in the unit.

nand.c:nand_readwithinpage

0x00000001 page is reading
0x00000000 0x00000003 0x00000000 StartUnit/EndUnit/offset
Reading out data:
00 unit:

waiting ECC result ready
00 bits error in the unit.
01 unit:

waiting ECC result ready
00 bits error in the unit.
02 unit:

waiting ECC result ready
00 bits error in the unit.
03 unit:

waiting ECC result ready
00 bits error in the unit.

nand.c:nand_readwithinpage

0x00000001 page is reading
0x00000004 0x00000007 0x00000000 StartUnit/EndUnit/offset
Reading out data:
04 unit:

waiting ECC result ready
00 bits error in the unit.
05 unit:

waiting ECC result ready
00 bits error in the unit.
06 unit:

waiting ECC result ready
00 bits error in the unit.
07 unit:

waiting ECC result ready
00 bits error in the unit.

load end!
KKG0G1DDDDDDDDDDDDDDsecure<0>Load uboot<0>

U-Boot 2009.01_Production-svn16462 (Sep 25 2012 - 18:33:16)

UЄU
NAND: NAND, size:1024MB, Micron(ID:0x2c,0x38), block size:512KB
1024 MiB
Env: NAND @ 0x01800000
bootcmd1
BOOTREASON=coldboot
APP CPU==>1GHz
Found: /boot
Found: /bootenv
Found: /systemA
Found: /systemB
Found: /rwboot
Found: /rwdata
Found: /bbt
Found 7 partitions
Creating 1 MTD partitions on "NAND 1GMiB 3,3V 8-bit":
0x02e00000-0x0fd00000 : "mtd=2"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 524288 bytes (512 KiB)
UBI: logical eraseblock size: 516096 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: fixable bit-flip detected at PEB 82
UBI: fixable bit-flip detected at PEB 146
UBI: fixable bit-flip detected at PEB 148
UBI: fixable bit-flip detected at PEB 200
UBI: fixable bit-flip detected at PEB 208
UBI: fixable bit-flip detected at PEB 217
UBI: fixable bit-flip detected at PEB 235
UBI: fixable bit-flip detected at PEB 264
UBI: fixable bit-flip detected at PEB 293
UBI: fixable bit-flip detected at PEB 300
UBI: fixable bit-flip detected at PEB 315
UBI warning: ubi_eba_init_scan: cannot reserve enough PEBs for bad PEB handling, reserved 4, need 40
UBI: attached mtd0 to ubi0
UBI: MTD device name: "mtd=2"
UBI: MTD device size: 0 MiB
UBI: number of good PEBs: 414
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 2
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 414
UBI: number of PEBs reserved for bad PEB handling: 4
UBI: max/mean erase counter: 13/3
simple_strtoul
simple_strtoul ret
Authenticating ubootenvaddon.tdf....offset: 0x288 (648)
pld->payloadSize: 0x8c4 (2244)
sizeof(TdfSignedPayload_t): 0x104 (260)
sizeof(TdfPayloadHeader_t): 0x8 (8)
pData=82400000 count=0x7b8 (1976)
bucket=0x7b8 (1976)
suceeds
## Executing script at 82400000
U-boot script: %version: 42.1.4 % -- %created_by: cappellw % -- %date_created: Tue Oct 16 13:44:58 2012 % -- addon=%version: 31 % /// creator!= the helpdesk
simple_strtoul
simple_strtoul ret
Authenticating appmipsauth.tdf....offset: 0x288 (648)
pld->payloadSize: 0x2c04 (11268)
sizeof(TdfSignedPayload_t): 0x104 (260)
sizeof(TdfPayloadHeader_t): 0x8 (8)
pData=a5c00000 count=0x2af8 (11000)
bucket=0xd78 (3448)
suceeds
## Starting application at 0xA5C00000 ...
999simple_strtoul
simple_strtoul ret
Authenticating vmlinux_plf.tdf....offset: 0x288 (648)
UBI: fixable bit-flip detected at PEB 129
UBI: schedule PEB 129 for scrubbing
UBI: fixable bit-flip detected at PEB 130
UBI: schedule PEB 130 for scrubbing
UBI: fixable bit-flip detected at PEB 130
UBI: schedule PEB 130 for scrubbing
UBI: fixable bit-flip detected at PEB 130
UBI: schedule PEB 130 for scrubbing
UBI: fixable bit-flip detected at PEB 131
UBI: schedule PEB 131 for scrubbing
UBI: fixable bit-flip detected at PEB 132
UBI: schedule PEB 132 for scrubbing
UBI: fixable bit-flip detected at PEB 132
UBI: schedule PEB 132 for scrubbing
UBI: fixable bit-flip detected at PEB 132
UBI: schedule PEB 132 for scrubbing
UBI: fixable bit-flip detected at PEB 132
UBI: schedule PEB 132 for scrubbing
UBI: fixable bit-flip detected at PEB 133
UBI: schedule PEB 133 for scrubbing
UBI: fixable bit-flip detected at PEB 134
UBI: schedule PEB 134 for scrubbing
UBI: fixable bit-flip detected at PEB 134
UBI: schedule PEB 134 for scrubbing
UBI: fixable bit-flip detected at PEB 134
UBI: schedule PEB 134 for scrubbing
suceeds
simple_strtoul
simple_strtoul ret
Authenticating vmlinux_app.tdf....offset: 0x288 (648)
UBI: fixable bit-flip detected at PEB 134
UBI: schedule PEB 134 for scrubbing
UBI: fixable bit-flip detected at PEB 135
UBI: schedule PEB 135 for scrubbing
UBI: fixable bit-flip detected at PEB 135
UBI: schedule PEB 135 for scrubbing
UBI: fixable bit-flip detected at PEB 135
UBI: schedule PEB 135 for scrubbing
UBI: fixable bit-flip detected at PEB 135
UBI: schedule PEB 135 for scrubbing
UBI: fixable bit-flip detected at PEB 136
UBI: schedule PEB 136 for scrubbing
UBI: fixable bit-flip detected at PEB 136
UBI: schedule PEB 136 for scrubbing
UBI: fixable bit-flip detected at PEB 136
UBI: schedule PEB 136 for scrubbing
UBI: fixable bit-flip detected at PEB 136
UBI: schedule PEB 136 for scrubbing
UBI: fixable bit-flip detected at PEB 137
UBI: schedule PEB 137 for scrubbing
UBI: fixable bit-flip detected at PEB 137
UBI: schedule PEB 137 for scrubbing
UBI: fixable bit-flip detected at PEB 137
UBI: schedule PEB 137 for scrubbing
UBI: fixable bit-flip detected at PEB 137
UBI: schedule PEB 137 for scrubbing
UBI: fixable bit-flip detected at PEB 138
UBI: schedule PEB 138 for scrubbing
UBI: fixable bit-flip detected at PEB 138
UBI: schedule PEB 138 for scrubbing
suceeds
simple_strtoul
simple_strtoul ret
Authenticating display.tdf....offset: 0x288 (648)
UBI: fixable bit-flip detected at PEB 144
UBI: schedule PEB 144 for scrubbing
UBI: fixable bit-flip detected at PEB 145
UBI: schedule PEB 145 for scrubbing
UBI: fixable bit-flip detected at PEB 145
UBI: schedule PEB 145 for scrubbing
UBI: fixable bit-flip detected at PEB 145
UBI: schedule PEB 145 for scrubbing
UBI: fixable bit-flip detected at PEB 146
UBI: schedule PEB 146 for scrubbing
UBI: fixable bit-flip detected at PEB 147
UBI: schedule PEB 147 for scrubbing
UBI: fixable bit-flip detected at PEB 147
UBI: schedule PEB 147 for scrubbing
UBI: fixable bit-flip detected at PEB 147
UBI: schedule PEB 147 for scrubbing
UBI: fixable bit-flip detected at PEB 147
UBI: schedule PEB 147 for scrubbing
UBI: fixable bit-flip detected at PEB 148
UBI: schedule PEB 148 for scrubbing
suceeds
simple_strtoul
simple_strtoul ret
Authenticating avdecoder.tdf....offset: 0x288 (648)
UBI: fixable bit-flip detected at PEB 138
UBI: schedule PEB 138 for scrubbing
UBI: fixable bit-flip detected at PEB 138
UBI: schedule PEB 138 for scrubbing
UBI: fixable bit-flip detected at PEB 138
UBI: schedule PEB 138 for scrubbing
UBI: fixable bit-flip detected at PEB 139
UBI: schedule PEB 139 for scrubbing
UBI: fixable bit-flip detected at PEB 139
UBI: schedule PEB 139 for scrubbing
UBI: fixable bit-flip detected at PEB 140
UBI: schedule PEB 140 for scrubbing
UBI: fixable bit-flip detected at PEB 140
UBI: schedule PEB 140 for scrubbing
UBI: fixable bit-flip detected at PEB 140
UBI: schedule PEB 140 for scrubbing
UBI: fixable bit-flip detected at PEB 140
UBI: schedule PEB 140 for scrubbing
UBI: fixable bit-flip detected at PEB 140
UBI: schedule PEB 140 for scrubbing
UBI: fixable bit-flip detected at PEB 141
UBI: schedule PEB 141 for scrubbing
UBI: fixable bit-flip detected at PEB 141
UBI: schedule PEB 141 for scrubbing
UBI: fixable bit-flip detected at PEB 141
UBI: schedule PEB 141 for scrubbing
UBI: fixable bit-flip detected at PEB 142
UBI: schedule PEB 142 for scrubbing
UBI: fixable bit-flip detected at PEB 142
UBI: schedule PEB 142 for scrubbing
UBI: fixable bit-flip detected at PEB 143
UBI: schedule PEB 143 for scrubbing
UBI: fixable bit-flip detected at PEB 143
UBI: schedule PEB 143 for scrubbing
UBI: fixable bit-flip detected at PEB 143
UBI: schedule PEB 143 for scrubbing
UBI: fixable bit-flip detected at PEB 144
UBI: schedule PEB 144 for scrubbing
suceeds
commandline passed to kernel is = mem=40m@72m mem=354m@2206m vecaddr=2m@70m loglevel=3 lpj=1949696 ipcfg_preopen_dly=0 ipcfg_postopen_dly=0 BOOTREASON=coldboot ip=172.21.1.2::172.21.1.1:255.255.0.0::vec0:off root=/dev/nfs rw nfsroot=172.21.1.1:/,udp,rsize=32768,wsize=32768,timeo=600,retrans=2,nfsvers=3 ph_debug=none ph_sys=A ph_def=A ph_alt=B
## Starting application at 0x80100800 ...
flush cache do_go 82
commandline passed to kernel is = console=ttyS0,115200n8 mtdparts=NAND:24m(/boot),22m(/bootenv),207m(/systemA),207m(/systemB),72m(/rwboot),468m(/rwdata),24m(/bbt) mem=70m@0k mem=80m@2126m vecaddr=2m@70m loglevel=3 lpj=1363968 lockd.nlm_grace_period=1 mm_ra_disable=1 BOOTREASON=coldboot ubi.mtd=3 secureblock.hook=31:9 root=f900 rootfstype=squashfs ip=none ph_debug=none ph_sys=A ph_def=A ph_alt=B
address of cmdlineparam = 80f34ba4
[ 0.320537] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(249,0)


Последний раз редактировалось Jakan89 15 мар 2019, 18:22, всего редактировалось 1 раз.

Не в сети
 Профиль    
 
 Заголовок сообщения: Re: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 15 мар 2019, 16:33 
Продвинутый форумчанин
Продвинутый форумчанин
Аватара пользователя
Зарегистрирован: 14 сен 2018, 18:14
Наличности на руках:
1,279.27

Сообщения: 2529
Откуда: Odesa,Ukraine
http://monitor.espec.ws/section31/print ... 50p40.html
https://rem-tv74.ucoz.ru/publ/osobennos ... ps/4-1-0-7


Не в сети
 Профиль    
 
[ТС]
 Заголовок сообщения: Re: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 18 мар 2019, 11:46 
Я тут случайно
Я тут случайно
Аватара пользователя
Зарегистрирован: 21 авг 2017, 16:15
Наличности на руках:
6.02

Сообщения: 5
Откуда: Влг
Посмотрел ссылки, все сводится к прогреву проца и улучшению охлаждения. Это можно попробовать, но после перепрошивки. Лог 2 содержит ошибки при загрузке, по этому имеет смысл начать с флешки.


Не в сети
 Профиль    
 
 Заголовок сообщения: Re: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 02 июн 2020, 20:27 
Я тут случайно
Я тут случайно
Аватара пользователя
Зарегистрирован: 22 фев 2017, 20:29
Наличности на руках:
1.00

Сообщения: 2
Откуда: Санкт-Петербург
добрый день, решили проблемму? у меня такой же лог, проц катан, память заменяна прошита- результат нуль(( :du_ma_et:


Не в сети
 Профиль    
 
 Заголовок сообщения: Re: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 02 июл 2020, 08:54 
Интересующийся
Интересующийся
Аватара пользователя
Зарегистрирован: 13 окт 2017, 17:02
Наличности на руках:
3.00

Сообщения: 45
Откуда: Волгоград
vll@list.ru писал(а):
память заменяна прошита-

В этом был явный смысл?
Если бы было все так просто
Jakan89 писал(а):
все сводится к прогреву проца

то никаких проблем с ремонтом данных модулей не было бы. Подводных камней тут намного больше, чем кажется.


Не в сети
 Профиль    
 
 Заголовок сообщения: Re: philips 42pfl6877t/60 не запускается, мигает 2 раза.
СообщениеДобавлено: 05 сен 2020, 19:17 
Интересующийся
Интересующийся
Аватара пользователя
Зарегистрирован: 08 ноя 2019, 00:17
Наличности на руках:
81.13

Сообщения: 112
Откуда: Россия
Аккуратно чистить компаунд, реболлить проц и восстанавливать дороги под компаундом. Причем дороги восстанавливать между лакированным текстолитом и точкой прикосновения компаунда. Они там рвутся. Все делать крайне аккуратно и под хорошим микроскопом



_________________
Хороший инженер - сытый инженер.
Не в сети
 Профиль    
 
Показать сообщения за:  Поле сортировки  
 Страница 1 из 1 [ Сообщений: 6 ] 


   Похожие темы   Автор   Ответы   Просмотры   Последнее сообщение 
Эта тема закрыта, вы не можете редактировать и оставлять сообщения в ней. Philips 42pfl6877t QFU2.1 нет звука

в форуме Ремонт телевизоров | Repair of TV

vlad223687

0

1442

16 фев 2022, 13:56

vlad223687 Перейти к последнему сообщению

В этой теме нет новых непрочитанных сообщений. Philips Philips 43PFT4001-60 нет звука

в форуме LCD

4taket

3

9805

14 дек 2022, 19:56

Artmax Перейти к последнему сообщению

В этой теме нет новых непрочитанных сообщений. 190vw9 philips постоянно мигает дисплей

в форуме Philips

iljabaz

6

2543

11 мар 2019, 16:46

iljabaz Перейти к последнему сообщению

В этой теме нет новых непрочитанных сообщений. HP Pavilion dv5 (DA0QT8MB6G0) При пуске мигает CapsLock 3 раза, потом пауза и снова мигает.

в форуме HP Compaq

Almetman

6

2635

29 авг 2019, 01:30

Almetman Перейти к последнему сообщению

Эта тема закрыта, вы не можете редактировать и оставлять сообщения в ней. DNS W253EUQ (CLEVO W244EUMB) Не запускается, мигает capslock

в форуме DNS

dvs

18

8146

22 дек 2015, 21:23

BaserLexx Перейти к последнему сообщению


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 6


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
cron