there is a laptop brought, one of (3.3 or 5 ) was completely shorted. It fixed by removing shorted capacity. but now we have all required voltages but there is no out voltages.
IC is RT8206A:
PIN1: (REF)=2.0 V
PIN4(ENLDO)=5V
PIN6(VIN)=19V
PIN7(LDO)=5V
PIN14(EN1)=3.3
PIN27(EN2)=3.3
PIN10(VOUT1)=0
PIN15(UGATE1)=0
PIN26(UGATE2)=5V
PIN30(VOUT2)=0
PIN18(LGATE1)=0
PIN23(LGATE2)=0
as you see we have enable command to produced voltage but no production. PWM IC (this IC) changed by new and true one but nothing changed.
please help.

Hey. I removed solder from 3.3V and 5V Jumpers, so I have 3.3 and 15V!. I checked FB but seems OK. So I decide to Replace RT8206A with New One.

Is the replacing of RT8206 decided your problem?

RT8206A changed by new one. but!! no 3.3 and 5 v. I changed back original one so I have 3.3v and 15v. I bought another new RT8206A so again no 3.3v and 5v. I have 5v LDO and 3.3&5 enable(high=3.3) on pin, but voltage not produced.

resistance on 3/5V main?

I isolated by removing solder on 3.3/5 jumpers. anyway resistance is 0.45/0.47.

and you want that is works
use Lab PS

It goes stranger every day!. now by changing RT8206A with another one, I have 3.3v on Self-inducer but not 5V. I search and test every par and pin of Controller, I gave enables, but not 5V. 5V Ugate voltage stays on 5Volt. I checked ILIM pins( on 3.3 side it is 1volt=true voltage, but on 5v side 0 V) I dont know what to do.