Asus K501UX REV: 2.0
Hybrid: SR2EZ
GPU: N16P-GT-A2
EC: KB9026Q

After connecting the power supply, the board starts without a picture with a current consumption of 0.3A (without battery), when you try to turn it off by pressing the button, it turns off and on again.
I programed the Bios with various batches without changes.
There is a lack of voltage on the coils feeding the BV hybrid available and I use it.
PL8101 0V 5 Ohm
PL8102 0V 5 Ohm

Other voltages present.

PQ8102 DREN There is voltage 19V B, S no voltage
PQ8104 no voltage on all pins

It is exactly the same with PL8101 coil transistors

PQ8103
D - 19V
B - 0V
S - 0V
PQ8107
D - 0V
B - 0V
S - 0V

Transistors are not pierced, they are controlled from PU8001 (NCP81206AMNTXG)
Please, more experienced colleagues, can these measurements indicate damage to PU8001?

Did you check for a short circuit on all chokes? Maybe there are traces of moisture?

There are no signs of flooding on the other coils are the correct voltages