| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| n5010 (DG15) 00 debug code https://vlab.su/viewtopic.php?f=41&t=16387 |
Страница 1 из 1 |
| P.zonouz [ 20 окт 2013, 11:06 ] | |
| Заголовок сообщения: | n5010 (DG15) 00 debug code [РЕШЕНО] |
Hi. I have DG15 board, problem was no display. I soldered post card to lpc port and problem seems that HUB(HM57) has problem. HUB(HM57) changed, but now I post card just show 00 code. where I dig? |
|
| RsM [ 20 окт 2013, 17:23 ] | |
| Заголовок сообщения: | Re: n5010 (DG15) 00 debug code |
Is Reset# 3.3V? Is there some codes or post 00 appears immediately? |
|
| P.zonouz [ 26 окт 2013, 12:10 ] | |
| Заголовок сообщения: | Re: n5010 (DG15) 00 debug code |
RsM писал(а): Is Reset# 3.3V? Is there some codes or post 00 appears immediately? RESET# is not 3.3v, code immediately goes to 00, and no other code appears. |
|
| P.zonouz [ 28 окт 2013, 20:39 ] | |
| Заголовок сообщения: | Re: n5010 (DG15) 00 debug code |
P.zonouz писал(а): RsM писал(а): Is Reset# 3.3V? Is there some codes or post 00 appears immediately? RESET# is not 3.3v, code immediately goes to 00, and no other code appears. sorry for mistake. On debug port PLT_RST# value in 3.3, debugger clock led blinking, but code is 00, nor display , 1A consuming. I am confused. where to dig? |
|
| Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|