Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
RTX 2080Ti - possible to use unused memory Pad? https://vlab.su/viewtopic.php?f=48&t=106822 |
Страница 1 из 1 |
Assassin [ 13 сен 2020, 01:33 ] | |
Заголовок сообщения: | RTX 2080Ti - possible to use unused memory Pad? |
hello there, is it possible to use the one unused memory solder pad on a RTX2080TI when another memory bank is physical damaged? (tracers ripped off)? on Founders/reference PCB, its always the Pad chanel A0 which is unused. i have seen a RTX2080ti where it was C0 which have no memory, but for that on A0 was also an memory chip soldered. like this one: So - how does the card address the right memory channel/bank? also with resistors similar with the one on the back for Micron/samsung memory? |
aleksros [ 13 сен 2020, 11:31 ] | |
Заголовок сообщения: | Re: RTX 2080Ti - possible to use unused memory Pad? |
No. In this case, it is impossible to use channel A0. It is disabled in the GPU itself. Where you find C0 - look at the GPU markings and compare with where there is no A0. For example, if the marking ... KA-A1 then the memory bank A0 is disconnected. If the marking ... KС-A1 the channel C0 is disconnected accordingly. |
Assassin [ 13 сен 2020, 19:38 ] | |
Заголовок сообщения: | Re: RTX 2080Ti - possible to use unused memory Pad? |
ok, thanks. there a only TU102-300(A)-K1-A1 and TU102-300(A)-K5-A1 known. Only these 2 GPUs (as 300A and only 300 without A) was seen on RTX 2080TI |
Assassin [ 14 сен 2020, 20:06 ] | |
Заголовок сообщения: | Re: RTX 2080Ti - possible to use unused memory Pad? |
another question: where is the resistor strap on RTX2080TI where i can switch from micron to samsung memory when i will replace all chips? i know only pictures from RTX2070 and 2080 - but not for the TI. |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |