Hello to all.
I have Gigabyte 1060 6GB Xtreme Edition.
This model: GV-N1060AORUS X-6GD, https://www.gigabyte.com/rs/Graphics-Ca ... -rev-10#kf
I try every bios from techpowerup but always get error code 43.
I am sure memory is okay, pass all test 100%.
Only thing i notice hdmi not showing picture but on display ports works and DVI.

It has two bios chips but no bios switch, not sure is second bios for VR HDMI on back.
If anyone have maybe bios file to upload or any other ideas what could give code 43.

Thank you.

Are you sure you are testing memory at 100% CLK??? MODs by default test it at 300MHz - it's almost useless.

Yes. I test on higher frequency all pass.

This code show 2 problem - GPU or memory. If memory OK - then GPU is dead. But you can meansure voltage and resistans on all PS on board - 1.0, 1.8, 3.3, 5, GPU and memory. On memory check VREF voltage too.

See this:

Ok will try to messure all and see.
Thank you for info.

This is a last chance to GPU.

there is no chance here...