Hello everyone.

I have 1080Ti Gigabyte aurus 11GB. Perfect condition.

The first problem it have on 3.3V almost short, but it was problem on chip for LED and i remove it, after that it was working normaly for 5-6h but now
main vcore after turn on goes 1.1V and after 4-5 seconds goes to 0V i preasume because thermal safety.
Is anyone have clue what could be problem and where to look?

I have similar problem on rtx 3080..only 20 ohms on 3.3 line and someone already removed some chips around led connectors. Some information would be great!

I did reflow of GPU and all it is working now normaly, voltage is back to normal. I preasume that it was bad contact or dirt under the chip witch was cause to draw more power.