Hello friends,
I have GTX 1060. Previously it was giving me errors on memory bank A0 so i replaced that memory bank but it was giving lines then i saw some rusted caps at the back of processor i took them out and cleaned the gpu after that ran superposition on it. But it ran just for one and stop giving display.

Now when i checked it again, it is now giving me errors on all the memory banks i used both version of mats 367 and 400 but same results.

Please if anyone can tell me what could be the issue and solution for it.

Photos of mats before and after:
http://imgur.com/a/C2ryeZo

Did you replace the capacitors? What's the memory resistance? Quite common for these cards to have the memory controller inside the GPU end up dying

I did not replace them as the line was damaged due to rusting. Also these caps are of very small value.

---

Posted after 1 hour 11 minutes 25 seconds:
Is there any way to confirm if main processor became faulty?