Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

Gigabyte GTX 3060Ti Vision Memories swap problem
https://vlab.su/viewtopic.php?f=48&t=136463
Страница 1 из 1

ll_r1d0_ll [ 15 авг 2023, 17:46 ]
Заголовок сообщения:  Gigabyte GTX 3060Ti Vision Memories swap problem  [РЕШЕНО]

Hello everyone. I got Gigabyte 3060ti vision from the customer which was giving garbage since it had HYNIX memory. I replace all the memories to Samsung and changed the straps according to samsung. Now the GPU detects and works perfectly in Secondary Gpu. But not giving any display from HDMI or DP Ports. What could be the issue ? The card was sealed and display was coming from all Display ports before changing memory. All the bios come with samsung support . I did not flash any bios yet but I dont think it could be the problem because all the bios come with Samaung memory support and same Display ports configuration . Any guide or idea ? Please let me know thank you

ayobisinen [ 15 авг 2023, 22:08 ]
Заголовок сообщения:  Re: Gigabyte GTX 3060Ti Vision Memories swap problem

Gpu-z screenshot.
There is also a vga straps, which you could have accidently moved.

EmirhanDonanimOfis [ 16 авг 2023, 12:29 ]
Заголовок сообщения:  Re: Gigabyte GTX 3060Ti Vision Memories swap problem

You need test the card with mats use this commands connect the card secondary after mats commands ./mods gputest.jse -skip_rm_state_init -oqa after ./mats -n 1 -e 5 after share results report.txt

before double check the all strap resistor perfectly soldered

ll_r1d0_ll [ 17 авг 2023, 20:26 ]
Заголовок сообщения:  Re: Gigabyte GTX 3060Ti Vision Memories swap problem

ayobisinen писал(а):
Gpu-z screenshot.
There is also a vga straps, which you could have accidently moved.

Hello I have changed only straps according to attached in picture. I have tried both 8GB Configuration. Card is detected as secondary only with 0000 Configuration and test passes perfectly even furmark and heaven benchmark. Can you please show me what combination is for VGA Please? I have attached picture of it. Please let me know if there is any mistake. That would be great.

EmirhanDonanimOfis писал(а):

Posted: Yesterday, 13:29
You need test the card with mats use this commands connect the card secondary after mats commands ./mods gputest.jse -skip_rm_state_init -oqa after ./mats -n 1 -e 5 after share results report.txt

before double check the all strap resistor perfectly soldered


I have checked multiple times the test PASSES.


Вложение:
3060ti load.png

Вложение:
3060ti.png

Вложение:
strapss__.jpg

Вложение:
MyStraps.jpg

ayobisinen [ 17 авг 2023, 22:11 ]
Заголовок сообщения:  Re: Gigabyte GTX 3060Ti Vision Memories swap problem

One strap resistor is missing.

ll_r1d0_ll [ 20 авг 2023, 23:33 ]
Заголовок сообщения:  Re: Gigabyte GTX 3060Ti Vision Memories swap problem

ayobisinen писал(а):
One strap resistor is missing.

Hi. I fixed it. The resistor was of STRAP 3 was also moved to 0 . Later I switched it back to its original position and picture came. Now its working fine :D Thanks for the advice. I could not do anything without you VGA STRAP Statement. Thanks again.

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/