Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't power
https://vlab.su/viewtopic.php?f=51&t=87139		 Страница 1 из 1
phantomEVO [ 27 фев 2019, 11:55 ]
Заголовок сообщения:  a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't power
hi to all, sorry if i write in english, but i'm italian

i've a macbook pro 15 retina middle 2015. the first problem was white screen after some times using it.


Изображение



]in this case, i did reboot and no problem. after some week, when i had white screen, i did reboot but blue screen o grey screen with apple logo and stuck here

Изображение

Изображение


after some weeks it gave me only big vertical white lines with the apple logo. and it froze here

so i have ordered a new bga (216-0846081) and new vga ram

with the new bga, the macbook doesn't turn on at all. if i solder the old bga, the macbook power on with vertical lines. i've tried to solder the new vram with the old bga but same result: vertical lines

Изображение

i would like to know: is it possible that i should program the macbook for installing the new bga?

if yes? how?

thanks
d-pal [ 27 фев 2019, 13:45 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
Good day.
In order to put a new video chip, there is nothing to program.
Also on this board you can put the chip 216-0846000 without any alterations, gpu id it has exactly the same k and 216-0846081.
It is possible that you have a problem in tying the memory modules. Ring all the resistors in the memory strapping.
hog369 [ 27 фев 2019, 13:48 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
Need no program new bga. May be remark chip with 64bit adress lines. Reball old chip, maybe no problems with it.
phantomEVO [ 27 фев 2019, 13:53 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
hi guys thank you for the help. i try to explain better all the step

1 step: reballed the gpu: no look, always lines

2 step: installed new gpu: macbook doesnt start

3 step: installed old gpu: macbook start with lines

4 step: installed new vram: still with lines
d-pal [ 27 фев 2019, 14:00 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
Most likely the new chip is not working. And instead of 216-0846081 you can install 216-0846000. It is easier to get it.
Yes, and perhaps the problem is not in the chip and not in memory, but in the memory strapping. Faced with this problem on this board.
Check all the resistors near the memory.
Do you have a circuit and a BoardViewer? If yes, then check the resistors R8903, R8953, R8803 and R8853, their break can have a similar effect.
phantomEVO [ 27 фев 2019, 17:38 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
d-pad thank you for your help! i have search in the whole internet, but i dont find any schematic of 820-00426 so for me it's impossible to fix it
d-pal [ 27 фев 2019, 18:42 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
Check your email.
phantomEVO [ 27 фев 2019, 23:08 ]
Заголовок сообщения:  Re: a1398 (820-00426-a) vga 216-0846081 with horizontal lines, changed with new one and the macbook doesn't po
thank you d-pad!
Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/