Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
15-n (DA0U93MB6D2) No Display https://vlab.su/viewtopic.php?f=53&t=128890 |
Страница 1 из 1 |
R EZ A [ 21 сен 2022, 10:43 ] | |
Заголовок сообщения: | 15-n (DA0U93MB6D2) No Display |
hi guys this board has water damage and it was almost dead in first place i turn it on and now it has all voltages on coils but there is no display. lvds or hdmi post code is 01 SYS_PWRGD = 1.8V RSMRST#=3.2V RSMRST#_R=1.9V how can i find is it cpu problem or what? as i make it alive from total death i really want to repair it ill be grateful of your helps thanks all |
mohammedsf [ 30 сен 2022, 07:46 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
Where was the damage in which area ? measure and post the voltages and resistances across all the coils.. |
Serguz05 [ 30 сен 2022, 09:25 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
not enough information. few measurements. and the resistance of the processor https://comsystem-tlt.ru/obzori/soproti ... processoro |
R EZ A [ 12 окт 2022, 19:52 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
mohammedsf писал(а): Where was the damage in which area ? measure and post the voltages and resistances across all the coils.. Serguz05 писал(а): not enough information. few measurements. and the resistance of the processor https://comsystem-tlt.ru/obzori/soproti ... processoro water damage was mostly around PU2 that doesn't let it to turn on and allitle around pu8 (pr121) that doesn't make cpu voltage i thought SYS_PWRGD = 1.8V means that all voltages are good also HWPG= 3V Voltages on all coils are good resistance for pl16=32ohm and pl11=148 its amd E1 cpu |
mohammedsf [ 13 окт 2022, 03:25 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
Does the voltages rise on PL11 & PL16 ? if yes, did you try to flash the bios ? do you have "U18" installed on the board ? |
R EZ A [ 13 окт 2022, 11:19 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
mohammedsf писал(а): Does the voltage rise on PL11 & PL16 ? if yes, did you try to flash the bios? do you have "U18" installed on the board ? yes i flash some bioses and same result PL11=0.90V PL16=0.84V no there is no u18 and my board is UMA |
mohammedsf [ 15 окт 2022, 04:12 ] | |
Заголовок сообщения: | Re: 15-n (DA0U93MB6D2) No Display |
Check the resistance of USB D+,D- lines, if they are not in low resistance try the attached bios.. |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |