Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
HP G62 (Quanta AX1) No backlight on LCD https://vlab.su/viewtopic.php?f=53&t=19766 |
Страница 1 из 1 |
latitude [ 09 мар 2014, 21:39 ] | |
Заголовок сообщения: | HP G62 (Quanta AX1) No backlight on LCD |
Hi guys, I have a 'little' problem with 2 same motherboards. Motherboards are pulled out from HP G62. 1. 01013y000-388-g 2. 01013y000-600-g Platform is Quanta AX1 Both mobo's are Intel cpu, Intel HM55 chipset, Ati 216-0774009 graphics. Problem is when I start the notebook, there is a picture on display, but there is no backlight. LCD cable and display has been changed for test - problem is not in cable or display. This problem is with both mobo's. I can't find information which IC turns backlight on when notebook starts - HM55 or Ati. Is there anybody who can explain me boot seq. for this noteobok (I'm a newbie). You can find schematics here: https://www.dropbox.com/s/teikrnnyb4oef ... REV_1A.pdf I think to change HM55 at first. |
александр90 [ 10 мар 2014, 08:02 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
measurements on connector "CN1" pin4, pin38, pin39? |
darkas [ 10 мар 2014, 13:24 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
latitude писал(а): I think to change HM55 at first. Do not change HM55, better measure the voltage of these signals and pins: +VIN_BLIGHT on CN1 pin39-40 BLON_CON on CN1 pin 38 VADJ1 on CN1 pin 37 EMU_LID on KBC (U4) pin 31 LID_EC# on KBC pin 127 or CN4 pin 3 and write voltages here |
latitude [ 10 мар 2014, 21:52 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
First - thanks for answers. +VIN_BLIGHT on CN1 pin39-40 - 1.55-1.6v BLON_CON on CN1 pin 38 - 1.55 VADJ1 on CN1 pin 37 - 0 EMU_LID on KBC (U4) pin 31 - 0 LID_EC# on KBC pin 127 or CN4 pin 3 - here I measure 0.3v and count to 0, which seems strange.. |
александр90 [ 12 мар 2014, 21:26 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
latitude писал(а): First - thanks for answers. +VIN_BLIGHT on CN1 pin39-40 - 1.55-1.6v check inductance "L15" and once more, measurements on connector "CN1" pin4? |
latitude [ 16 мар 2014, 18:00 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
I'm sorry for delay, but I have work out of town. On pin4, CN1 = 0v But I can't find this L15 on the board... |
kotnatan [ 16 мар 2014, 18:19 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
latitude писал(а): But I can't find this L15 on the board... Вложение: 1.png ---------- Добавлено спустя 7 минут 52 секунды: ---------- latitude QUANTA AX1 - BOARDVIEW |
latitude [ 16 мар 2014, 18:52 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
Yes, I found it on the schematic, but I can't find it on the board... Still searching.. |
kotnatan [ 16 мар 2014, 19:03 ] | |
Заголовок сообщения: | Re: HP G62 (Quanta AX1) No backlight on LCD |
latitude писал(а): but I can't find it on the board... kotnatan писал(а): latitude
QUANTA AX1 - BOARDVIEW |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |