Hello,
have this hp g6-1280ec that show no image internal or external. have VERY dusty cooling so overheating was real bad.

try to heat up ati gpu to check function but nothing changed. try to heat pch.

post card show code 11, other post card show code 17-dimm error/try to change but still the same/

capslock blinks 5 times




anybody have bios for this model?

Check if this match yours.

Extracted from 0166CF66.BIN.DEC (sp60864.exe)

SRY dont have enough points or messages

---

Posted after 1 minute 33 seconds:
hurray ith that post i have enough messages. i gonna try

Don't forget to backup your motherboard flash before programming.

Andromedas> How u extract it?


bios is good, still the same. replaced processor, stil the same.

1.5v for memory is good, what else can i check?

---

Posted after 4 hours 40 minutes 35 seconds:
do u think that gpu is fried?

It is a large process, (well, not so much) if I have time, next day I will write a little tuto.

It´s behaviour is the same after reprogram bios?

--Yes, gpu could be fried.

maybe your ati gpu is broken, try to change a new one

For diagnostic chip ATI gpu. Blowing hot air on top chip - 300°C for 15-20 seconds.