hi all ,I wanted to programming the kb9012 using my ISP programming so I have done this connections :
pin(59)kb9012 to pin(1) ISP programmer
pin(60)kb9012 to pin(6) ISP programmer
pin(61)kb9012 to pin(5) ISP programmer
pin(62)kb9012 to pin(2) ISP programmer
pin(9)kb9012 to pin(8) ISP programmer
GND to pin(4) ISP programmer
but when I want to read , i have got error , the kb9012 is ok so what should i do to read that file

what is the name of your ISP programmer?

my programmer is TVP2589U+ , I have use this schematic of this adapter to make connections





and i considered the internal chip is 25X10

pin(42) of KB9012 to GND , and i have got error , please can any one give me the specifications of internal flash to add it to my programmer

DEVICE ID
MANFACTURER ID
PROGRAM MODE
PAGE SIZE

Ask the author of this theme. I use this programmer and no problems.

What programmer do you use ?

as I have read kb9012 datasheet , i have found than pin 42 and pin 41 must grounded , so users can flush and program a SPI flash via specific IKB pins with external tool
please just i need these information of kb9012 internal flash:


DEVICE ID
MANFACTURER ID
PROGRAM MODE
PAGE SIZE