добрый день, уважаемые форумчане.
телефон включается с IMEI 12345
дело в том, что не могу с ним ничего сделать программатором (mxbox)
вот лог BUS Check
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085хххх
Using device: HTI, FW ver: 00.24, SN: 0000хххх
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
Using device: HTI, FW ver: 00.24, SN: 0000хххх
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
всё, дальше дело не идет, в углу мигает Ready
лог Scan
Version from phone: 06wk41v64.24
Version from file: 35.0.002
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085xxxx
Using device: HTI, FW ver: 00.24, SN: 0000xxxx
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Invalid imei plain, RPL backup skipped.
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
Total time for flashing process(boot+erase+write) was 20.782 s
Phone type: RM-313 (Nokia N82)
SW version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 12345610654321-?
Product code: 0551526
Battery voltage: 3945 mV, current: 112 mA
Language Pack:
- not available.
SLPA ver[2]: PA_SL2 (15 digit NCK)
SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
Version from file: 35.0.002
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085xxxx
Using device: HTI, FW ver: 00.24, SN: 0000xxxx
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Invalid imei plain, RPL backup skipped.
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
Total time for flashing process(boot+erase+write) was 20.782 s
Phone type: RM-313 (Nokia N82)
SW version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 12345610654321-?
Product code: 0551526
Battery voltage: 3945 mV, current: 112 mA
Language Pack:
- not available.
SLPA ver[2]: PA_SL2 (15 digit NCK)
SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
не прошивает
Version from phone: 06wk41v64.24
Version from file: 35.0.002
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085xxxx
Using device: HTI, FW ver: 00.24, SN: 0000xxxx
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Invalid imei plain, RPL backup skipped.
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
Total time for flashing process(boot+erase+write) was 21.657 s
Phone type: RM-313 (Nokia N82)
SW version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 12345610654321-?
Product code: 0551526
Battery voltage: 3962 mV, current: 110 mA
Language Pack:
- not available.
SLPA ver[2]: PA_SL2 (15 digit NCK)
SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
Version from file: 35.0.002
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085xxxx
Using device: HTI, FW ver: 00.24, SN: 0000xxxx
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Invalid imei plain, RPL backup skipped.
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
Total time for flashing process(boot+erase+write) was 21.657 s
Phone type: RM-313 (Nokia N82)
SW version: V 06wk41v64.24 05-11-09 RM-313 (c) Nokia
Imei plain: 12345610654321-?
Product code: 0551526
Battery voltage: 3962 mV, current: 110 mA
Language Pack:
- not available.
SLPA ver[2]: PA_SL2 (15 digit NCK)
SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
не стирает
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085хххх
Using device: HTI, FW ver: 00.24, SN: 0000хххх
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
Process failed !
Using device: HTI, FW ver: 00.24, SN: 0000хххх
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D4A8F43BCB00FE9DD4AF31A5CF5A2F8F6902BC0
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 196001177E730052739C2D973C61DDAB6B591D7D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
eBB5ProtocolType: OLD
Storage0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
CMT PAPUBKEYS HASH: F8311F20A18CAD3B70A4F896C74DD8711E189EED
TransmissionMode: DDR&TX2
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported Ids: 24200703, 24200704, 24200705, 24200706
reading boot config 1 failed!
Process failed !
естевственно, не могу залить RPL, не могу восстановить. что ему надо?
через UFS стирает и шьет
, а с другой - UFS при прошивке половину проверок не делает, поэтому шьет то, что другие отказываются. Советую для Nokia взять что-нибудь посерьезней - MT-Box, BEST...