The charger owner accidentally switched the charger to 220v when it was supposed to be 110v. In the first instant it damaged the input fuse and the 220uF / 200v capacitor. These two components have already been replaced but it still has more components burned being a resistor of code R3 that is open that I don't know its value, it is next to a yellow polyester capacitor right at the entrance of the electrical network.
It would be easier if I could get the schematic diagram of the charger.

take a photo of the board

Поставил резистор R3 180к/2Вт, поменял вздувшийся конденсатор 220мкФ/200в и предохранитель 2А, после замены прибор ожил