Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

Garmin VIRB elite
https://vlab.su/viewtopic.php?f=162&t=53018
Страница 1 из 1

montarbo [ 09 ноя 2016, 21:10 ]
Заголовок сообщения:  Garmin VIRB elite

Dear members,
I had this cam into water and got water damage to the charger/HDMI port PCB. Is there any chance for schematics.

montarbo [ 27 ноя 2016, 22:36 ]
Заголовок сообщения:  Re: Garmin VIRB elite

I think that question about schematic might be impossible. I would like then to ask if anyone can provide a HD pic for the USB/ HDMI board, if anyone has a lying defective device around?

montarbo [ 06 дек 2016, 21:20 ]
Заголовок сообщения:  Re: Garmin VIRB elite  [РЕШЕНО]

Problem solved. Cleaning the board the only defective part was a clamp diode at the 10 pin min usb connector plus the pin of the usb connector to that diode was eaten away by corrosion. Replacing the diode and putting a jumper to the USB pin solved the problem. Everything working fine. Some reflow of the hole board was done so that I guarantee good connection to all other components after thorough cleaning and rinsing with 99.9 % ethanol.

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/