Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
Lumix TZ-1 https://vlab.su/viewtopic.php?f=167&t=1784 |
Страница 1 из 1 |
latigido922 [ 23 янв 2011, 23:45 ] | |
Заголовок сообщения: | Lumix TZ-1 |
Hi! I had a problem with sand clogged TZ-1 lens. After clearing and applying thin film of lubricant thev move smooth, but camera shut downs after 17 seconds. I suppose some adjustment initialization procedure has to be taken... Any ideas? Thanks! |
Honesty [ 09 фев 2011, 13:23 ] | |
Заголовок сообщения: | Re: Lumix TZ-1 |
Hi! Most likely you it is bad почители a lens from sand. I advise once again to disassemble a lens and to clear of sand! Good luck! |
latigido922 [ 14 фев 2011, 11:09 ] | |
Заголовок сообщения: | Re: Lumix TZ-1 |
Hi, Thanks for idea, but in fact I clear lens more than 3 times - same result ![]() BR |
cadaseda [ 14 фев 2011, 18:12 ] | |
Заголовок сообщения: | Re: Lumix TZ-1 |
it is possible that mechanics have been disturbed, it is necessary to rearrange to the initial position. |
latigido922 [ 17 фев 2011, 13:10 ] | |
Заголовок сообщения: | Re: Lumix TZ-1 |
Yes, that is what I am looking for - HOW to rearrange initial position. I am sure lens are assembled OK, but there must be some service routine - maybe with software or pressing combination of buttons.. Advices are welcome! |
Honesty [ 18 фев 2011, 14:56 ] | |
Заголовок сообщения: | Re: Lumix TZ-1 |
Without experience it is difficult... Go to the authorized service the center! Good luck! |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |