Hi everybody. There is this Asus mb that was switching on with all dashes on debug card so I decided to reball the southbridge and after that it was working fine but every time it boots, bios gives "New CPU inserted ..." error so i go to bios and change setting and save but it's again the same. I reflashed bios, changed the DIP8 bios chip itself, changed battery but nothing changed. any ideas I'll appreciate. by the way after a couple of restarts when i want to verify the chip with my programmer there is checksum error.

BIOS chip pin voltages with mb switched on
MX25L8005PC
Pin 1 : 3.3v
Pin 2 : 0
Pin 3 : 3.3v
Pin 4 : 0
Pin 5 : 0
Pin 6 : 0
Pin 7 : 3.3v
Pin 8 : 3.3v

Thanks in advance

Couldn't solve the problem so decided to disable Error reporting in BIOS and then it worked without problems. Just wanted to share and close the topic.