Ремонт: Ноутбуков, Компьютеров :: DVR Oltec HDVR-04ANV нет видео со входов-выходов

qqqqq [ 05 авг 2018, 16:50 ]

Заголовок сообщения:

DVR Oltec HDVR-04ANV нет видео со входов-выходов

Подскажите, в чем может быть проблема, как видно из лога неправильно определяется видеочип, соостветственно нет изображения на VGA и картинок с видеокамер. Регик Oltec HDVR-04ANV версия прошивки во вложении.

лог

	qqqqq [ 07 авг 2018, 22:14 ]
Заголовок сообщения:	Re: DVR Oltec HDVR-04ANV нет видео со входов-выходов
Попробовал запустить взятую из другой прошивки более новую версию оболочки Sofia: /var $ ./Sofia GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 LIBDVR : FILE -> crypto.c, LINE -> 345: GetFrontDecodeDeviceID Failed! device error no:-1! LIBDVR : alpum_process ok, g_alputype: 0 BLOCK AS4 BLOCK AS4 BLOCK AS4 BLOCK AS4 xxval : 11 env_init: mtd0,start:80000000,size:30000,esize:10000 name:boot" GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 ******************************************************************** \| SYSTEM INFO \| libdvr version: 2.4.4 - Complie time Nov 8 2012 09:18:46 \| product type: DVR_HI3000D-S \| slave_num: 0 \| mast video channel: 4 \| mast audio channel: 4 \|slave video channel: 0 \|slave audio channel: 0 \| alarm mode: Com in-4 out-1 \| forward video chip: NVP1114 \| master chip: unknow: 4 \| back video chip: nvp1114 \| store interface: SATA \| network interface: RJ45 ****************************************************************** =================================== \| LIBHICAP Compiled at Apr 24 2013 08:49:54 =================================== GENERATION: 1, PRODUCTION: 1, MAIN_SERIES: 3, HYPO_SERIES: 2, OEM_TYPE: 0 SLAVE_CHIP_NUM is 0 VI_CHN_NUM_HOST_CHIP is 4 VI_CHN_NUM_PER_SLAVE_CHIP is 0 AI_CHN_NUM_HOST_CHIP is 4 AI_CHN_NUM_PER_SLAVE_CHIP is 0 ====================== GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 VIDEO_SAMPLE_CHIP_1 = 3,VIDEO_SAMPLE_CHIP_2 = 3, VIDEO_SAMPLE_CHIP:14 HWID_MAIN_SERIES_TYPE = 3 DVR/MVR info: TOTAL_VI_CHN_NUM: 4, HDEC_CHN_NUM: 4, HVR_TOTAL_CHN_NUM: 4, VDEC_CHN_NUM: 4 open /dev/hi3520_boot error SampleSysInit enter, Apr 24 2013, 08:49:54 Sofia: $Version_fix: R10, $Source svn: 8019, $Include svn: 9447, $Build svn: 9468, Exchange svn: 9382, Build in:Sep 29 2013, 14:24:34, 0 Infra: $base Dir Trunk, $Source svn: 9330, $Include svn: 2915, $Build in:Sep 22 2013, 14:38:26 CInfra::start()>>>>>>>>>> CTimerManager::CTimerManager()>>>>>>>>> CThreadManager::CThreadManager()>>>>>>>>> libManager.a: $base Dir D_General_Manager_V4.02.0.R11_20130906, $Source svn: 9149, $Include svn: 9138, $Build in:Sep 23 2013, 18:57:40 CConfigManager::start()... parse custom config:/mnt/custom/CustomConfig/Storage.custom failed! CVerifyConfig::Start()... CDefaultConfig::Start()... onVerifyNetIPFilter() ../../Manager/VerifyConfig.cpp 791 onVerifyNetDHCP() ../../Manager/VerifyConfig.cpp 796 onVerifyNetDDNS() ../../Manager/VerifyConfig.cpp 801 onVerifyNetEmail() ../../Manager/VerifyConfig.cpp 806 custom config NetWork.RemoteDevice verify failed with ret:20! GUITheme List:General ethMac:00:0c:9f:0c:01:dd @CDevAbility::start()>>>>>>>>>> HasIntelFunc: 0, HasCPCFunc: 0, HasNatFunc: 0, HasSpotFunc: 0 m_nVTotalChns: 4, m_nVCapChns: 4, m_nVPlayChns: 4, m_nVDigitChns: 0 CFrontboard::CFrontboard()>>>> BLOCK AS LIBDVR : FrontboardCreate Successful CFrontBoardParser::Init()>>>>>>>>> sProtocolName: General CFrontBoardParser::Init()>>>>>>>>> sProtocolName: General CConfigManager::setConfig(Ability.DeviceDesc, ) Manager: $Rev: 1008 $, Build in:Sep 29 2013, 14:21:10 CManager::start()>>>>>>>>>> CConsole::start()... CMagicBox::start()... Magic error [][] CMagicBox::Initialize() clear... Magic error [][] Magic error [][] Log Manager starting....! Log.a: $base Dir Trunk, $Source svn: 9337, $Include svn: 2919, $Build in:Sep 23 2013, 19:00:34 =======Shut Down at 2000-0-0 00:00:00 with m_exitState[0], SerialNo: CAutoMaintain::Start()... CDaylight::start()... Magic error [][] CConfigManager::setConfig(General.Location, ) Launched at Local Time 1999/11/30 00:00:25! CUserManager::start...... onVerifyNetIPFilter() ../../Manager/VerifyConfig.cpp 791 login(default, ****, GUI, address:) CPacketManagerImp::CPacketManagerImp()>>>>>>>>> sm_packetBuf null use self heap memory! Adjust Page! Packet usage : 0K / 20479K, 0% ----------------------[11-30 00:00:25] ======= pre record buf 4096 ===================================== \| LIBFVIDEO: Compiled at Sep 18 2013 18:33:49 ===================================== GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 GetFrontDecodeDeviceID,256,0 GetFrontDecodeDeviceID,270,0 GetFrontDecodeDeviceID,308,0 BLOCK AS DVRProID=5 >>>>>>>>FVIDEO_TYPE_1=3 >>>>>>>>FVIDEO_TYPE_2=3 >>>>>>>>>FVIDEO_TYPE=14 >>>>>>>>>VI_CHN_NUM_HOST_CHIP=4 >>>>>>>>>SLAVE_CHIP_NUM=0 >>>>>>>>>VI_CHN_NUM_PER_SLAVE_CHIP=0 >>>>>>>>Open BVIDEO_DEV faild! >>>>>>>>>Open VGA_DEV faild! fvideo_register:Register operation to NVP1118B:14 nvp1918/1118B_720h Video Decoder PAL Mode ~~~~~~~~~~~~~~~~NEXTCHIP FVIDEO TYPE: err arg Magic error [][] CMOS ExitTime:2063-15-31 31:63:57 CurrentTime:1999-11-30 00:00:26 reversion2_fix s_videomod:0 NVP1918 Clock 108M Mode env_init: mtd0,start:80000000,size:30000,esize:10000 name:boot" CTime::setCurrentTime to 2000-11-30 00:00:26 Save SysTime to Flash:2000-11-30 00:00:26, Time:755678 Min, Trail:755678 Min ~~~~~~~~~~~~~~~~nvp1918 S/W reset~~~~~~~~~~~~~~~~ nvp1918/1118B_720h_init_pla chip = 0x60 nvp1918/1118B_720h Video Decoder PAL Mode ~~~~~~~~~~~~~~~~NEXTCHIP FVIDEO TYPE: err arg reversion2_fix s_videomod:0 NVP1918 Clock 108M Mode ~~~~~~~~~~~~~~~~nvp1918 S/W reset~~~~~~~~~~~~~~~~ nvp1918/1118B_720h_init_pla chip = 0x62 HI3120_SET_VSTD reset error open /dev/mdin240 failed fd_240 ioctl failed ! VideoOut SetInit Resolution:1024x768 Graphics - HiVideoSetResolution: Open mdin240 failed! Graphics - HiVideoSetResolution: fd_240 ioctl failed ! Gdi: $base Dir Trunk, $Source svn: 9346, $Include svn: 2831, $Build in:Sep 22 2013, 16:03:15 CGDI::start()>>>>>>>> Graphics - GraphicsCreate: GraphicsCreate enter Graphics - GraphicsSetVstd: enter Graphics - GraphicsSetVstd: mem0:0x41625000,len:1572864 mem1:(nil),len:0 Graphics - GraphicsSetVstd: mapped_mem:0x417a5000 Graphics - GraphicsSetVstd: mem0:0x417a6000,len:831488 mem1:(nil),len:0 Graphics - GraphicsCreate: GraphicsCreate enter Graphics - GraphicsSetVstd: enter Graphics - GraphicsSetVstd: enter @================================= @mem = 0x41625000 0x41625000 0x00000000 @pitch = 2048 @width = 1024 @height = 768 @foramt = 0 @=================================== @================================= @mem = 0x417a5000 0x417a5000 0x00000000 @pitch = 64 @width = 32 @height = 32 @foramt = 0 @=================================== CLocales::CLocales()>>>>>>>>> CFontManager::CFontManager()>>>>>>>>> CFontManager::CFontManager Open FontSmallEn.bin File Failed! SuportLang:Arabic SuportLang:Brazilian SuportLang:Bulgarian SuportLang:Czech SuportLang:Dutch SuportLang:English SuportLang:Farsi SuportLang:Finnish SuportLang:French SuportLang:German SuportLang:Greek SuportLang:Hebrew SuportLang:Hungarian SuportLang:Indonesian SuportLang:Italian SuportLang:Japanese SuportLang:Poland SuportLang:Portugal SuportLang:Romanian SuportLang:Russian SuportLang:SimpChinese SuportLang:Slovakia SuportLang:Spanish SuportLang:Swedish SuportLang:Thai SuportLang:TradChinese SuportLang:Turkey SuportLang:Vietnamese CConfigManager::getConfig 'General', but default config is not set yet! GUI Use Theme:default PageRecordMode PageConfigRecord PageConfigEncode PageHddManager PageConfigNetCommon PageConfigPtz PageAlarm PageConfigMotionDetect PageConfigBlindDetect PageConfigLossDetect PageConfigAlarm PageAlarmOut PageConfigAbnormal PageConfig PageConfigGeneral PageConfigDisplay PageUserManager PageUpgrade PageConfigDefault PageBackup PageDeviceDesc PageAutoMaintain PageConfigDigiCh Logo Path:/mnt/logo/bmp_logo.jpg CDriverManager::CDriverManager()>>>>>>>>> Storage: $Rev: 922 $, $Author: liwj $, Build in:Sep 26 2013, 16:39:21 Storage: $base Dir D_2010.08.03_WFS_V2.80.0.R08, $Source svn: 9442, $Include svn: 2747, $Build in:Sep 26 2013, 16:39:21 CStorage::start()>>>>>>>>>> CBackupManager::CBackupManager()>>>>>>>>>>>>>>>> CDriverManager::Start()>>>>>>>>> LIBDVR : create hotplug monitor thread!LIBDVR : ------ ide library : version 2.00, built at Jun 5 2013, 13:18:11 ----- LIBDVR : FILE -> misc/scanbus.c, LINE -> 329: opendir /proc/scsi/usb-storage/ usbport1 = 0,usbport2 = 0 LIBDVR : This is SATA_TYPE LIBDVR : Can't Find Any Sata Dev wfs_file_sys_init() libWFS.a $Rev: 9 $, Build in:Jul 31 2013 10:43:09 disk_num = 0 ide_num:0 ide_port:1 ide_mask:0x0 ide_bad:0x0 cap: wfs_file_sys_init() end============================ driver basic parameter: ---------------------------------------------------------------------------------------------------- \| dev.part \|type\|total_clus \| temp_off \| index_off \| dir_off \| data_off \| rev_clus \| sec/clus \|status\| \|----------\|----\|-----------\|----------\|-----------\|---------\|----------\|----------\|----------\|------\| ------------------------------------------------------------------------------------------------ driver operation parameter: ------------------------------------------------------------------------------------------------------------------------- \| dev.part \| F\| S\| curr \| start1 \| end1 \| start2 \| end2 \| \| \| \| \| \|MM-DD HH:MM:SS\| clus \|MM-DD HH:MM:SS\| clus \|MM-DD HH:MM:SS\| clus \|MM-DD HH:MM:SS\| clus \| \|----------\|--\|--\|--------\|--------------\|--------\|--------------\|--------\|--------------\|--------\|--------------\|--------\| -------------------------------------------------------------------------------------------------------------------------- driver time chart: -------------------------------------------------------------------------- \|dev.part \| period of time \| \|---------\|----------------------------------------------------------------\| ------------------------------------------------------------------------ driver time sections: ------------------------------------------------------------------------ \|dev part \|start_clus\| end_clus \| start_time \| end_time \| ------------------------------------------------------------------------ CMedia::start() $Rev: 972 $>>>>> onVerifyAudioInFormat() ../../Manager/VerifyConfig.cpp 1164 onVerifyTour() ../../Manager/VerifyConfig.cpp 1077 1 4 CCaptureBuffer::CCaptureBuffer size = 4096 KB sched set 98, 2 1 4 CPlayer::start()...... CPacketBuffer::CPacketBuffer size = 2047 KB CLocalPlayer::onConfigEncode maxDecodePower:29500416 CLocalPlayer::start()........ onVerifyTour() ../../Manager/VerifyConfig.cpp 1077 ===>>> VideoSetTVMargin (0, 0, 0, 0) VideoSetTVMargin===== left: 0, top: 0, right: 0, bottom: 0 hdly =75 vdly =30 hbnd=0 vbnd =45 hdly =75 vdly =30 hbnd=0 vbnd =45 hdly =75 vdly =30 hbnd=0 vbnd =45 hdly =75 vdly =30 hbnd=0 vbnd =45 CSplitManager::start()...... tracepoint: ../../Media/SplitManager.cpp,316 tracepoint: ../../Media/SplitManager.cpp,333 tracepoint: ../../Media/SplitManager.cpp,351 tracepoint: ../../Media/SplitManager.cpp,384 CConfigManager::setConfig(General.SystemState, ) =======================CaptureSetFormat 3====== =======================CaptureSetFormat 3====== Segmentation fault /var $ env_init: mtd0,start:80000000,size:30000,esize:10000 name:boot" Инициализация происходит чуть по другому, но результат вроде тот же.

	fobos [ 09 авг 2018, 22:22 ]
Заголовок сообщения:	Re: DVR Oltec HDVR-04ANV нет видео со входов-выходов
qqqqq, проверьте наличие всех необходимых напряжений на плате рега, обратите внимание на формирование 1,2В для питания видеочипов

Ремонт: Ноутбуков, Компьютеров https://vlab.su/

DVR Oltec HDVR-04ANV нет видео со входов-выходов https://vlab.su/viewtopic.php?f=270&t=78968	Страница 1 из 1

Страница 1 из 1	Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/