| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| FX516 (Intel) lack of stable voltage, no power https://vlab.su/viewtopic.php?f=4&t=139698 |
Страница 1 из 1 |
| Gigabyte_P [ 18 янв 2024, 14:39 ] | |
| Заголовок сообщения: | FX516 (Intel) lack of stable voltage, no power |
Hi Everyone, I have problem with ASUS TUF FX516PM-HN023T. I checked all resistances on coil and all looks fine. I checked motherboard a microscope and I didn't see anything disturbing. When I soldered the plus and ground to the input plug, I noticed that on the first mosfet there was 19V at the input but behind it there was 0.020V the second mosfet has 0.020V at the input and 4V at the output. The main measuring resistor at the input is 4V. When I soldered the measuring resistor, I saw that power was supplied to the 3 and 5V coil for a moment and then disappeared. The power supply consumption when the coils are powered is 0.100A Using thermal imaging, I can see that the point that will only light up is the main 3/5V converter. Does anyone have any idea? |
|
| Котеус [ 18 янв 2024, 17:44 ] | |
| Заголовок сообщения: | Re: FX516 (Intel) lack of stable voltage, no power |
Gigabyte_P писал(а): the point that will only light up is the main 3/5V converter. Looks like you have short circuit on 3/5v pwm IC. Please open datasheet for pwm IC and check for short-circuit all LDOs and outputs. Gigabyte_P писал(а): on the first mosfet there was 19V at the input but behind it there was 0.020V This is protect from shorts. It is normal |
|
| Gigabyte_P [ 18 янв 2024, 20:30 ] | |
| Заголовок сообщения: | Re: FX516 (Intel) lack of stable voltage, no power |
Котеус писал(а): Looks like you have short circuit on 3/5v pwm IC. Please open datasheet for pwm IC and check for short-circuit all LDOs and outputs. 3V LDO have 145K ohm (pin #3) 5V LDO have 2,8M ohm (pin #13) First mosfet it is: PKCH2BB Second mosfet it is: QM3058M6AC PWM CONTROLLER it is: SN51285ARUKR Battery charger it is: ISL9238BHRTZ-T 1 mosfet Drain on first mosfet: 19V Source and gate - 0,02V up to 0,65V 2 mosfet Drain 0,02V up to 0,65V Source and gate ~4V pin #4 on first and second mosfet have 0,02V up to 0,65V pin #4 on first and second mosfet have 7,3M ohm resistance to ground |
|
| Котеус [ 18 янв 2024, 21:01 ] | |
| Заголовок сообщения: | Re: FX516 (Intel) lack of stable voltage, no power |
What about 8 and 18 pins of SN51285A? And check this theme viewtopic.php?f=40&t=82166 (also check EC) |
|
| Gigabyte_P [ 19 янв 2024, 14:30 ] | |
| Заголовок сообщения: | Re: FX516 (Intel) lack of stable voltage, no power |
Hi, thank you for your answers and help. P_3vadsw_lx_30 - pin 8 - 13k ohm +3VAO - pin 3 - 5,5k ohm +5VAO - pin 13 - 3,5M ohm When I set 15V on the service power supply and apply it to the input plug, the OCP and OVP protections do not turn on, but when I set 19V, the protection turns on. I will read submitted topic Best regards. |
|
| Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|