Good Day..

1st post here and 1st time user of Vertyanov JIG ec programmer,. I am learning so please forgive mistakes. I am to program ENE 9022QD on LA-D751P Rev 1.0.. I do not know which signal on which pin on jtag. please advise how to do it,. attaching a picture, please have a look at advise.. Thanks

http://img4.imagetitan.com/img.php?image=23_setting.jpg


https://www.linkpicture.com/q/20201215_140202.jpg


Thanks in advance.

Cheers

frankmnld
LA-D751P (JEC) KB_pins=8 KSO3=1 KSI4=4 KSI5=5 KSI7=3 KSI6=2

Thanks alot,. can yo define jtag wires so i can know which wire is for which signal, i do not undertand jtag wires and pins.. https://www.linkpicture.com/q/20201215_140202.jpg

It is necessary to solder the programmer wires to a special connector on the board.