Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

NP530U3C (Lotus-13) Dont work iSSD
https://vlab.su/viewtopic.php?f=42&t=122687
Страница 1 из 1

estudier [ 23 янв 2022, 19:48 ]
Заголовок сообщения:  NP530U3C (Lotus-13) Dont work iSSD

Hello.
This is my first post here and I want to compart a case Im working now.

This machine dont accept any command on iSSD (Sandisk i100 24GB) to recover.

When I boot with Strelec WINPE, we can see 24G disk, but only raw.

I already try:
- Diskpart --> read normally, but when tried CLEAN, DELETE or CREATE any volume, process fail and disk disapear from the list, needed reboot.
- EASEuS --> cant read any information from this chip, and desapear after every try, needed to reboot to see drive again.

Im thinking in change this BGA169 chip to a 256GB, but dont have certain about compatibility between BGA169 and BGA153.
Only found BGA153 offers.

You think if I make a reflow on this chip I can recover this to work or only change will be necessary?

Thanks a lot for any help/tip

REM [ 24 янв 2022, 13:22 ]
Заголовок сообщения:  Re: NP530U3C (Lotus-13) Dont work iSSD

iSSD - turbocache
turn it off and don't think
https://ascnb1.ru/forma1/viewtopic.php?f=232&t=114177

estudier [ 25 янв 2022, 07:54 ]
Заголовок сообщения:  Re: NP530U3C (Lotus-13) Dont work iSSD

I will do a reflow and post here the results...
If even dont work, put it off the board and work with a SSD 2.5".

REM [ 25 янв 2022, 11:41 ]
Заголовок сообщения:  Re: NP530U3C (Lotus-13) Dont work iSSD

Цитата:
I will do a reflow and post here the results...

I doubt it
Цитата:
If even dont work, put it off the board and work with a SSD 2.5".

this is the right decision

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/