Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

connect the matrix N156B6-L3D in place of N156B6-L08.
https://vlab.su/viewtopic.php?f=45&t=15788
Страница 1 из 1

Josep [ 23 сен 2013, 22:15 ]
Заголовок сообщения:  connect the matrix N156B6-L3D in place of N156B6-L08.

Looking scheme to N156B6-L3D
Looking for a way to connect the matrix N156B6-L3D in place of N156B6-L08.
My laptop do not support 3D and 2-channel LVDS.
Do you have any ideas use 3D matrix in place of the normal?

Dimension [ 24 сен 2013, 00:56 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

here is schame for this panel
hope it can help

Josep [ 24 сен 2013, 01:27 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

Thank You Dimension
I do not have 15 messages :-(
Do you have any ideas use 3D matrix ( N156B6-L3D ) in place of the normal (N156B6-L08) ?

Dimension [ 24 сен 2013, 10:23 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

so sorry i dont know how to do that
never try to do that yet

Josep [ 24 сен 2013, 19:11 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

I understand. Unfortunately, I have no choice I have to find method.
Now I change the colors in sequence.
The first time was all white

kotnatan [ 24 сен 2013, 19:36 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

Possible interchangeable items matrices 15.6 Notebook
N156B3-L0BVer.1.0
N156B6-L03
N156B6-L04
N156B3-L0B
N156B3-L04
N156B3-L01
N156B3-L02
N156B6-L04Rev.C1
N156B6-L05
N156B6-L08Rev.C1
N156B6-L0A
N156B6-L0B
N156B6-L08
N156B6-L07
N156B6-L06
N156B6-L06Rev.C1
LTN156AT10
LTN156AT09
LTN156AT01
LTN156AT02
LTN156AT02-A01
LT141X2-156
LP156WH3(TL)(L2)
LP156WH3(TL)(B1)
LP156WH3(TL)(L1)
LTN156AT03
LTN156AT05
LTN156AT07-A01
LTN156AT08
LTN156AT07
LTN156AT06-A01
LTN156AT05-H01
LTN156AT06
N156B6-L0BVer.1.0
N156B6-L0BVer.2.0
N156O6-L01
N156O6-L02
N156O6-L0D
N156B6-L3D
N156B6-L0I
N156B6-L0BVer.3.0
N156B6-L0D
N156O6-L0DRev.C1
LP156WH3(TL)(A3)
LP156WH3(TL)(A2)
BT156GW02
BT156GW02V.0
CLAA156WA01
BT156GW01V.A
BT156GW01V.4
BT156GW01
BT156GW01V.1
CLAA156WA01A
CLAA156WA11
LP156WD1(TL)(A2)
LP156WD1(TL)(B2)
LP156WD1(TL)(B3)
LP156WD1(TL)(A1)
CLAA156WB11A
CLAA156WA11A
CLAA156WB11
B156XW04V.0
B156XW03V.2
B156XW01
B156XW01V.0
B156XW01V.1
B156RW01V.1
B156RW01V.0
B156HW01V.5
B156RW01
B156XW01V.2
B156XW02
B156XW03V.0
B156XW03V.1
B156XW02V.3
B156XW02V.2

Josep [ 24 сен 2013, 20:16 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

I understand.

The first time was all white.

Now I change EDID N156B6-L08 is the matrix N156B6-L3D the colors in sequence ( white, blue, red and so on ).
Why? How have to do to work normally?

kotnatan [ 24 сен 2013, 20:41 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

check train to T-con and the presence of LVDS signals
---------- Добавлено спустя 17 минут 53 секунды: ----------
Josep писал(а):
the colors in sequence ( white, blue, red and so on )
- factory test mode

no signal from the video chip
---------- Добавлено спустя 2 минуты 54 секунды: ----------
you have a monitor or laptop? :du_ma_et:

Josep [ 24 сен 2013, 21:17 ]
Заголовок сообщения:  Re: connect the matrix N156B6-L3D in place of N156B6-L08.

I have a Acer laptop.
Laptop Motherboard JM31 is version 2.0

The presence LVDS signals checked using an oscilloscope.
They are all.

Do not have waveforms to compare with the standard.

How check train to T-Con ?

PS. Excuse me but I have the possibility of the presence of writing once an hour

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/