Hi, I need to replace 2 SMD capacitors that got burnt on my board (current capacitors in place aren't original spec).

They both are on the PCI-express 12 volt rail (don't mind the part joined capacitor on the second picture near the shunt resistor, it needs soldering properly).

I don't know what voltage and capacitance these capacitors should have - they are circled in red, one in each picture attached.

Any ideas on original spec or any suggestions for what spec would work?

Thanks.

first foto - 0.1u*16v
second foto - 4.7u*16v

Hi, thanks for your response. Sorry I can't see my original photos on this forum.

I've labelled the photos here, could you please clarify which capacitor for which number photo?

And to confirm, that's "u" as in microfarad yes?

Thanks again.

2 - 0.1microfarad *16v
1 - 4.7microfarad *16v

That's great, thanks aleksros!

Just curious, how did you determine those values?

from schematics

you wouldn't happen to know where to get schematics for this particular board would you?

Parts installed and shorted MOSFET repaired. Thanks.