Ok, thank you, but i dont know how to understand that, could you tell me on photo?
---------- Добавлено спустя 1 минуту 13 секунд: ----------
Photo of strap

фото вы уже получили в рамку обвели какие страпы, их надо двигать.
посмотрите, что у вас на руках карты из 1060 серии

I have that strips on 1060 (broken pcb) IT was i think with Samsung memory, but there is 5 rows of strips when i have 6 and i dont know which side is which
---------- Добавлено спустя 19 минут 12 секунд: ----------
This three strips are for memory? On left i have ground and on Right i have 1.8v

вот ссылка
https://www.hardwarebbq.com/zotac-gtx-1 ... usel-31001

отсюда взял картинку

Just only try to move them and see, what gpu-z and mats show, you need to make gpu-z show a real memory capacity and vram vendor. Move one- check, photo of strap and photo of gpu-z, then next.
I recommend to make it, when card set 1st in system

Working! I figured how to operate that low/high values :) but when i moved that other 3 strips as on yours photo IT was no display, and when i back to original zotac IT works fine, but, now i have trouble that my clocks are stuck on 139mhz and 405mhz, could be bios problem? Or maybe that other strips?

BIOS :)

dikabraz
не могли бы подсказать, он 3 карты в одной теме пробует отремонтировать, или бренды биоса меняет на авось?

Me? I try to fix one card i change bioses with other manufactures via programmer

а ну тогда верните оригинальный биос

Guys its working! Tried with a few bioses and one from Gigabyte works fine!! I cannot run original bios because it was GTX 1070 zotac at first, then i swapped Here gp106-300-a1 with k4g40325fe-hc25 from other card and now its working! Thank you guys very much

to zotac 1060 3gb mini
https://www.techpowerup.com/vgabios/?ar ... 072&since=
---------- Добавлено спустя 1 минуту 16 секунд: ----------
https://www.techpowerup.com/vgabios/?ar ... 072&since=

I will try, but with that bios i Had issue with fan (only one spinning)
---------- Добавлено спустя 9 минут 22 секунды: ----------
Ok, works with zotac mini bios (on Gigabyte i Had issue with HDMI only 60hz on full HD) now works everything fine, thank you everyone :)