Unfortunately I don't know the pinout from the connector.
That's why I once measured the 4-pin fan connectors that are plated through to the 14-pin connector.
I have replaced the two 0Ohm resistors but this was not successful. The old ones were broken.
![Изображение](https://www.bilder-upload.eu/thumb/e05bbc-1589292414.jpg)
![Изображение](https://www.bilder-upload.eu/thumb/817ea0-1589292581.jpg)
![Изображение](https://www.bilder-upload.eu/thumb/1eab8a-1589292643.jpg)