Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
Power Color RX 570 8GB help with identifying resistor value. https://vlab.su/viewtopic.php?f=48&t=107440 |
Страница 1 из 1 |
aleksros [ 30 сен 2020, 13:46 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
allas писал(а): What should be the value of the resistor in the picture? 10к allas писал(а): can I use the 4C09N ? yes |
allas [ 01 окт 2020, 17:28 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
I soldered 5 phases and started the card. Something is wrong VRM Efficiency 100% . |
galkinvv [ 02 окт 2020, 00:27 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
VRM Efficiency looks fine. It is efficiecncy of DC-DC converter, not "the percent of max tdp", that is shown for nvidia. However >100W power draw for idle card seems really incorrect. 100W without spinning fans would quickly put the gpu much hoter than 50°... It looks either like incorrect measurement, or like some ICs of of DC-DC converter are eating 100W and are extermely hot for idle mode. |
galkinvv [ 02 окт 2020, 21:12 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
I don't think that these are measuring. They may be related to some power phase, and zero resistors often are not damaged by themselves, but a burned due too high current. So, I suggest re-checking that all about phases related to those zero resitors are fine |
allas [ 06 окт 2020, 22:00 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
I replaced the Ir 3567B but it is still the same, the power supply system is slightly warm. There are strange jumps in the current consumption in the 100W-150W gpuz. The card can hang during these jumps. Once I saw even 1.5V on the gpu. I have no idea what lying to the measurements ?? |
allas [ 07 окт 2020, 15:33 ] | |
Заголовок сообщения: | Re: Power Color RX 570 8GB help with identifying resistor value. |
It turned out that the card was mechanically damaged. A broken pad under one of the coils, someone tried to stick it. After removing the coil, the card has normal consumption. Thanks for your help. |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |