Ремонт: Ноутбуков, Компьютеров
https://vlab.su/

add DVI to non DVI reference 1080TI
https://vlab.su/viewtopic.php?f=48&t=109331
Страница 1 из 1

hashwood [ 21 ноя 2020, 21:14 ]
Заголовок сообщения:  add DVI to non DVI reference 1080TI

hello, is it possible to add DVI connector to non DVI 1080TI,

Add the connector and populate the missing parts.

Anyone did this ?

nemos [ 22 ноя 2020, 00:15 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

it's possible but much easier to use DP to DVI converter

hashwood [ 22 ноя 2020, 17:46 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

thanks. I tried to use active DP-DVI adapter, but it works at max 70hz at QHD resolution. It's not that hard to solder a connector from a damaged board...

nemos [ 22 ноя 2020, 20:32 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

it's not so hard but useless. DVI output limitations for most of videocards is QHD - 70Hz or WQHD - 60Hz. So don't spend your time, you'll not get more

hashwood [ 23 ноя 2020, 15:43 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

who told you that ?
I used QHD 110hz on dual Dvi on nvidia 770TI, Nvidia 1080, Nvidia 1080TI

hashwood [ 25 ноя 2020, 00:15 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

for any crazy guy like me who still use DVI:

be careful that except adding parts that are near video out connectors

you also need to add a 1k resistor that's under GPU chip.

Posted after 2 hours 36 minutes 29 seconds:
anyone knows what's the fan controller chip on reference 1080TI ? Fans are not spinning.

aleksros [ 25 ноя 2020, 11:41 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

Fan controller it's GPU. If fan not spinning - check 12v and pwm pulse from gpu.

hashwood [ 25 ноя 2020, 15:26 ]
Заголовок сообщения:  Re: add DVI to non DVI reference 1080TI

thanks, and it must be a mosfet ?

Страница 1 из 1 Часовой пояс: UTC + 4 часа
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/