|
Текущее время: 22 ноя 2024, 07:40
|
Сообщения без ответов | Активные темы
|
|
Страница 1 из 1 [ Сообщений: 6 ] |
|
 |
|
 |
|
| Автор |
|
|
Tinynja
[ТС]
|
Заголовок сообщения: Gigabyte RTX 2070 mods fail  Добавлено: 08 фев 2022, 23:12 |
| Я тут случайно |
 |
 |
Зарегистрирован: 19 янв 2022, 20:42
Наличности на руках:
3.04 
Сообщения: 3
Откуда: Canada
|
Привет, я пытаюсь научиться ремонтировать видеокарты. Я купил сломанный Gigabyte RTX 2070 на eBay (второй GPU, который я пытаюсь восстановить), и благодаря всем на vlab.su я смог установить mats и mods и выполнить различные тесты. Однако сейчас я застрял и мне нужен совет. (примечание: обычно я пользуюсь гугл-переводчиком, извините за мой неверный язык) Все напряжения присутствуют, прошит новый VBios. Запуск mats с 20 МБ дает успешный результат, без ошибок. Поэтому я пытаюсь запускать mods, но не уверен, что понимаю результаты. Сначала я запускаю тест 178, вот файл журнала:
MODS start: Tue Feb 8 12:13:41 2022
Command Line : gputest.jse -oqa -old_gold -test 178 -dramclk_percent 100 -ignore_fatal_errors -run_on_error -fan_speed 75
CPU
Foundry : GenuineIntel
Name : Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz
Family : 6
Model : 12
Stepping : 3
Version
MODS : 400.221
OperatingSystem: Linux (x86_64)
Kernel : 4.17.4-gentoo
KernelDriver : 3.87
SBIOS Version : 2008
SBIOS Date : 08/12/2014
HostName : tinylinux
Sys-uuid : 49367940-D85F-11DD-B38E-F07959623F57
GPU 0 [01:00.0] dev.sub 0.0
----------------------------------------
DevInst : 0
PCI Location : 0x00, 0x01, 0x00, 0x00
GPU DID : 0x1f07
PDI : 0xeadfe819c7b0a945
Raw ECID : 0x010032c00000005202c41991
Raw ECID (GHS) : 0x1645202c4180000000b018200
ECID : PKWB46-11_x03_y08
Device Id : TU106
Revision : a1
NV Base : 0xf6000000
FB Base : 0xe0000000
IRQ : 11
Setting Fan 1 of GPU 0 [01:00.0] to 75%
Foundry : TSMC
Subsystem VID : 0x1458
Subsystem DID : 0x37ad
Board ID : 0x00d9
Chip SKU : 400-A
Project : G160-0052
Fuse File Fmt : JSON
Display : 0x00000200 (id)
SBIOS Init : Secondary
Native Mode : 1280x1024
Memory Size : 8192 MB
FB Vendor : Micron
RAM Protocol : GDDR6
RAM Config : 1
ROM Version : 90.06.18.40.02
ROM Type : Partner Production
ROM OEM Vendor : NVIDIA
ROM Timestamp : 2018-8-21 15:45:51
ROM Expiration : 2018-12-31 14:45:51
ROM GUID : B3C8A38736D04F76A997167A4C5AB541
PPC Pri/Sec FW : Unknown
PPC Driver Ver : Unknown
PState (mode) : 8 5 3 2 [0]
PState Version : 3.5
EDC : Disabled
GPC Clock : 1980.0/1978.7 MHz NAFLL
DRAM Clock : 7001.0/6999.3 MHz DEFAULT
Host Clock : 1440.0/1439.8 MHz NAFLL
XBar Clock : 1890.0/1876.2 MHz NAFLL
Sys Clock : 1980.0/1968.1 MHz NAFLL
Power Clock : 540.0/538.5 MHz DEFAULT
NVDec Clock : 1830.0/1815.8 MHz NAFLL
Display Clock : 1330.0/1329.6 MHz DEFAULT
NVVDD : 1050 mV
GPC Mask : 0x07 (3 GPCs)
TPC Mask : [3f 3f 3f] (18 TPCs)
FB Mask : 0x0f (4 FB Partitions)
ROP/L2 Mask : [3 3 3 3] (8 ROP/L2s)
PES Mask : [7 7 7] (9 PESes)
FBIO Mask : 0x0f (4 FBIO Partitions)
FBIO Shift Mask: 0x00
XP Mask : 0x03 (2 3gio Pads)
Nvdec Mask : 0x07 (3 engines)
Nvenc Mask : 0x01 (1 engine)
Gpu Temp : 33 deg C
PEX Rx Lanes : 0xffff
PEX Tx Lanes : 0xffff
PEX Det. Lanes : 0xffff
PEX Width, ASLM: 16 lanes, Not Supported
PEX Link Speed : 8.0 Gbit/s
PEX BandWidth : 128.0 Gbit/s
ASPM, ASPM-CYA : (L0s/L1, Disabled)
ASPM L1SS, CYA : (Disabled, L1.1/L1.2)
LTR : Enabled
Chipset
VID : 8086 (Intel)
Chipset DID : 0C00 (Unknown)
Chipset ASPM : L0s/L1
Chipset LTR : Enabled
RM Version : rel/gpu_drv/r400/r400_00-535
resumehandler.js: 1
gputest.js : 29
oqa.spc : 3
boards.js : 3
Running test(s) on GPU 0 [01:00.0] (DID: 0x1f07)
Enter JsGpuTest.SetPState (test 0)
Switched to PState 0 (0.max). Pcie Speed=8000, x16
ClkM = 7000.98 MHz
ClkHost = 1440.00 MHz
ClkDisp = 1330.00 MHz
ClkGpc = 1980.00 MHz
ClkXbar = 1890.00 MHz
ClkSys = 1980.00 MHz
ClkHub = 810.00 MHz
ClkPwr = 540.00 MHz
ClkNvd = 1830.00 MHz
ClkPexGen = 3.00
NVVDD = 1050 mV
Exit 000000000000 : JsGpuTest.SetPState (test 0) ok
Enter NewWfMatsTest.NewWfMats_RunBgStress (test 178)
Enter GLStressTest.Run (test 2)
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_GRAPHICS FAULT_PDE GPCCLIENT_T1_8 ACCESS_TYPE_VIRT_READ
New unexpected HW interrupts have occurred, count = 1 (1 new)
Background GLStress on dev 0 completed 400 frames.
GLStress "Post-Run" callback failed (Fifo: MMU Error).
GLStress ErrCounter::ExitStackFrame failed.
Exit 020000002097 : GLStressTest.Run (test 2) unexpected device interrupts
Error!
Error 020000002097 : Object.GenericBgTest_Thread unexpected device interrupts
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP -------------------------
ls[19].type=0x3 .pwrRail=0x1 .data.sensor.pwrDevIdx=6
.chRelMask = 0x7ff
.chRels[0].type=0x0 .chIdx=0x3 .data.weight.weight = 1000 (1.0)
.chRels[1].type=0x0 .chIdx=0x4 .data.weight.weight = 1000 (1.0)
.chRels[2].type=0x0 .chIdx=0x5 .data.weight.weight = 1000 (1.0)
.chRels[3].type=0x0 .chIdx=0x2 .data.weight.weight = fffff000 (-1.0)
.chRels[4].type=0x0 .chIdx=0x6 .data.weight.weight = fffff000 (-1.0)
.chRels[5].type=0x0 .chIdx=0x7 .data.weight.weight = fffff000 (-1.0)
.chRels[6].type=0x0 .chIdx=0x0 .data.weight.weight = 1000 (1.0)
.chRels[7].type=0x0 .chIdx=0x9 .data.weight.weight = 1000 (1.0)
.chRels[8].type=0x0 .chIdx=0xb .data.weight.weight = fffff000 (-1.0)
.chRels[9].type=0x1 .chIdx=0x1
.data.balancedPhaseEst.numTotalPhases = 8
.data.balancedPhaseEst.numStaticPhases = 5
.data.balancedPhaseEst.balancedPhasePolicyRelIdxFirst = 3
.data.balancedPhaseEst.balancedPhasePolicyRelIdxLast = 3
.chRels[10].type=0x0 .chIdx=0x2 .data.weight.weight = 1000 (1.0)
UserdManager : Getting new USERD allocation at offset 0
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb000
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE GRAPHICS GPCCLIENT_T1_8 faulted @ 0x20_06bf6000. Fault is of type FAULT_PDE ACCESS_TYPE_VIRT_READ on GPC 1 on VEID 0
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_GRAPHICS FAULT_PDE GPCCLIENT_T1_8 ACCESS_TYPE_VIRT_READ
NVRM: MMU Fault: Fault from Channel 0x1's context
NVRM: fifoRunRcRecovery_v02_01: Running RC on channel 1
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=31 [Fifo: MMU Error]
NVRM-RC: Attempting Recovery...
NVRM: grPgEngFecsBufferAlloc_GF106: Reusing the buffer previously allocated.
NVRM: rcRemoveChannelFromScheduling_GP100: fifoResetAndInitAfterError_HAL not called
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0001, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: mcPrintPprivDebugRegs_GK104 ringmaster interrupt GBL_WRITE_ERROR_SYS 0x00000001!
NVRM: mcPrintPprivDebugRegs_GK104 SYS(0) ringstation details : addr=0x00244a18 wrdata=0xffffffff info=0x19400325 code=0xbadf2000!
NVRM: mcPrintPprivDebugRegs_GK104 SYS(0) ringstation details : subid=0x00000019 priv_level=0x00000000 priv_master=0x00000025!
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: grProcessPreemptionStats_GP100: chId=1 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=1 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=1 Saves=0 Restores=1 WFI=0 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=1 therefore no dynamic state
Bps: 0.0000 GB read or written per second (1.1325 GB in 17683440314.456 sec)
Bps: 0.0% percent of raw FB bw (448.0627 GB per second)
New unexpected HW interrupts have occurred, count = 1 (1 new)
GLStress Fps=0.00 Pps=0.00M
GLStress ElapsedRun time=0.01
GLStress ElapsedGpu time=17683440314.46
GLStress ElapsedGpuIdle time=0.0000
Background GLStress on dev 0 completed 400 frames.
GLStress "Post-Run" callback failed (Fifo: MMU Error).
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 512
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb200
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE4112FB0 ChanGrp: 7F7EE410FEF0 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
NVRM: ctxshareConstruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
Allocated chunk: phys=0x002400000, size=0x1e6666000, pte=0x06, displayable
AllocateEntireFramebuffer allocated 1 chunk(s), free memory left = 0x1f47a0000
pteKind 0x6
Memory allocation took: 0.014470 s
WfMats box height of 64
NewWfMats: Decode A00-B00-A10-C00-C00-A01-B00 (0x00428814) has 1945 boxes
NewWfMats: Decode A01-B01-A11-C01-C01-A00-B01 (0x01539905) has 1945 boxes
NewWfMats: Decode A10-B10-A00-C10-C10-A11-B10 (0x0260aa36) has 1946 boxes
NewWfMats: Decode A11-B11-A01-C11-C11-A10-B11 (0x0371bb27) has 1945 boxes
NewWfMats: Decode B00-A00-B10-D00-D00-B01-A00 (0x0406cc50) has 1945 boxes
NewWfMats: Decode B01-A01-B11-D01-D01-B00-A01 (0x0517dd41) has 1945 boxes
NewWfMats: Decode B10-A10-B00-D10-D10-B11-A10 (0x0624ee72) has 1945 boxes
NewWfMats: Decode B11-A11-B01-D11-D11-B10-A11 (0x0735ff63) has 1945 boxes
NewWfMats: Decode C00-D00-C10-A00-A00-C01-D00 (0x08ca009c) has 1946 boxes
NewWfMats: Decode C01-D01-C11-A01-A01-C00-D01 (0x09db118d) has 1946 boxes
NewWfMats: Decode C10-D10-C00-A10-A10-C11-D10 (0x0ae822be) has 1946 boxes
NewWfMats: Decode C11-D11-C01-A11-A11-C10-D11 (0x0bf933af) has 1946 boxes
NewWfMats: Decode D00-C00-D10-B00-B00-D01-C00 (0x0c8e44d8) has 1946 boxes
NewWfMats: Decode D01-C01-D11-B01-B01-D00-C01 (0x0d9f55c9) has 1946 boxes
NewWfMats: Decode D10-C10-D00-B10-B10-D11-C10 (0x0eac66fa) has 1946 boxes
NewWfMats: Decode D11-C11-D01-B11-B11-D10-C11 (0x0fbd77eb) has 1946 boxes
NewWfMats: NumBlitLoops is 16
PatternCount=32, BlitNumBoxes=1920, 60.0 reps.
Total Boxes = 31129, blit=30736 7684.0MB cpu=0 0.0MB (0.0%) unused=393
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Using 4 copy engine(s)
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1024
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb400
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1536
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb600
Allocated C361 USERMODE
NVRM: grProcessPreemptionStats_GP100: chId=2 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=2 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=2 Saves=1 Restores=1 WFI=1 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=2 therefore no dynamic state
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
GLStress ErrCounter::ExitStackFrame failed.
First error recorded: 97 unexpected device interrupts
JavaScript stack trace:
#0: Run() in <native>:0
#1: GenericBgTest_Thread() in gputest.jse:554
#2: apply() in <native>:0
#3: RunThread() in gputest.jse:601
Exit 020000002097 : GLStressTest.Run (test 2) unexpected device interrupts
Error!
UserdManager : Getting new USERD allocation at offset 2048
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb800
Warning: MSI for device 0000:1:00.0 not serviced
Error 020000002097 : Object.GenericBgTest_Thread unexpected device interrupts
Finished my run function
Calling my stop listeners:
Leaving RunThread
Allocated C361 USERMODE
Allocated C5B5 DMA_COPY
SetupCopyEngine
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP -------------------------
els[1].type=0x0 .chIdx=0x4 .data.weight.weight = 1000 (1.0)
.chRels[2].type=0x0 .chIdx=0x5 .data.weight.weight = 1000 (1.0)
.chRels[3].type=0x0 .chIdx=0x2 .data.weight.weight = fffff000 (-1.0)
.chRels[4].type=0x0 .chIdx=0x6 .data.weight.weight = fffff000 (-1.0)
.chRels[5].type=0x0 .chIdx=0x7 .data.weight.weight = fffff000 (-1.0)
.chRels[6].type=0x0 .chIdx=0x0 .data.weight.weight = 1000 (1.0)
.chRels[7].type=0x0 .chIdx=0x9 .data.weight.weight = 1000 (1.0)
.chRels[8].type=0x0 .chIdx=0xb .data.weight.weight = fffff000 (-1.0)
.chRels[9].type=0x1 .chIdx=0x1
.data.balancedPhaseEst.numTotalPhases = 8
.data.balancedPhaseEst.numStaticPhases = 5
.data.balancedPhaseEst.balancedPhasePolicyRelIdxFirst = 3
.data.balancedPhaseEst.balancedPhasePolicyRelIdxLast = 3
.chRels[10].type=0x0 .chIdx=0x2 .data.weight.weight = 1000 (1.0)
UserdManager : Getting new USERD allocation at offset 0
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb000
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE GRAPHICS GPCCLIENT_T1_8 faulted @ 0x20_06bf6000. Fault is of type FAULT_PDE ACCESS_TYPE_VIRT_READ on GPC 1 on VEID 0
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_GRAPHICS FAULT_PDE GPCCLIENT_T1_8 ACCESS_TYPE_VIRT_READ
NVRM: MMU Fault: Fault from Channel 0x1's context
NVRM: fifoRunRcRecovery_v02_01: Running RC on channel 1
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=31 [Fifo: MMU Error]
NVRM-RC: Attempting Recovery...
NVRM: grPgEngFecsBufferAlloc_GF106: Reusing the buffer previously allocated.
NVRM: rcRemoveChannelFromScheduling_GP100: fifoResetAndInitAfterError_HAL not called
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0001, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: mcPrintPprivDebugRegs_GK104 ringmaster interrupt GBL_WRITE_ERROR_SYS 0x00000001!
NVRM: mcPrintPprivDebugRegs_GK104 SYS(0) ringstation details : addr=0x00244a18 wrdata=0xffffffff info=0x19400325 code=0xbadf2000!
NVRM: mcPrintPprivDebugRegs_GK104 SYS(0) ringstation details : subid=0x00000019 priv_level=0x00000000 priv_master=0x00000025!
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: grProcessPreemptionStats_GP100: chId=1 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=1 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=1 Saves=0 Restores=1 WFI=0 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=1 therefore no dynamic state
Bps: 0.0000 GB read or written per second (1.1325 GB in 17683440314.456 sec)
Bps: 0.0% percent of raw FB bw (448.0627 GB per second)
New unexpected HW interrupts have occurred, count = 1 (1 new)
GLStress Fps=0.00 Pps=0.00M
GLStress ElapsedRun time=0.01
GLStress ElapsedGpu time=17683440314.46
GLStress ElapsedGpuIdle time=0.0000
Background GLStress on dev 0 completed 400 frames.
GLStress "Post-Run" callback failed (Fifo: MMU Error).
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 512
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb200
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE4112FB0 ChanGrp: 7F7EE410FEF0 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
NVRM: ctxshareConstruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
Allocated chunk: phys=0x002400000, size=0x1e6666000, pte=0x06, displayable
AllocateEntireFramebuffer allocated 1 chunk(s), free memory left = 0x1f47a0000
pteKind 0x6
Memory allocation took: 0.014470 s
WfMats box height of 64
NewWfMats: Decode A00-B00-A10-C00-C00-A01-B00 (0x00428814) has 1945 boxes
NewWfMats: Decode A01-B01-A11-C01-C01-A00-B01 (0x01539905) has 1945 boxes
NewWfMats: Decode A10-B10-A00-C10-C10-A11-B10 (0x0260aa36) has 1946 boxes
NewWfMats: Decode A11-B11-A01-C11-C11-A10-B11 (0x0371bb27) has 1945 boxes
NewWfMats: Decode B00-A00-B10-D00-D00-B01-A00 (0x0406cc50) has 1945 boxes
NewWfMats: Decode B01-A01-B11-D01-D01-B00-A01 (0x0517dd41) has 1945 boxes
NewWfMats: Decode B10-A10-B00-D10-D10-B11-A10 (0x0624ee72) has 1945 boxes
NewWfMats: Decode B11-A11-B01-D11-D11-B10-A11 (0x0735ff63) has 1945 boxes
NewWfMats: Decode C00-D00-C10-A00-A00-C01-D00 (0x08ca009c) has 1946 boxes
NewWfMats: Decode C01-D01-C11-A01-A01-C00-D01 (0x09db118d) has 1946 boxes
NewWfMats: Decode C10-D10-C00-A10-A10-C11-D10 (0x0ae822be) has 1946 boxes
NewWfMats: Decode C11-D11-C01-A11-A11-C10-D11 (0x0bf933af) has 1946 boxes
NewWfMats: Decode D00-C00-D10-B00-B00-D01-C00 (0x0c8e44d8) has 1946 boxes
NewWfMats: Decode D01-C01-D11-B01-B01-D00-C01 (0x0d9f55c9) has 1946 boxes
NewWfMats: Decode D10-C10-D00-B10-B10-D11-C10 (0x0eac66fa) has 1946 boxes
NewWfMats: Decode D11-C11-D01-B11-B11-D10-C11 (0x0fbd77eb) has 1946 boxes
NewWfMats: NumBlitLoops is 16
PatternCount=32, BlitNumBoxes=1920, 60.0 reps.
Total Boxes = 31129, blit=30736 7684.0MB cpu=0 0.0MB (0.0%) unused=393
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Using 4 copy engine(s)
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1024
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb400
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1536
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb600
Allocated C361 USERMODE
NVRM: grProcessPreemptionStats_GP100: chId=2 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=2 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=2 Saves=1 Restores=1 WFI=1 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=2 therefore no dynamic state
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
GLStress ErrCounter::ExitStackFrame failed.
First error recorded: 97 unexpected device interrupts
JavaScript stack trace:
#0: Run() in <native>:0
#1: GenericBgTest_Thread() in gputest.jse:554
#2: apply() in <native>:0
#3: RunThread() in gputest.jse:601
Exit 020000002097 : GLStressTest.Run (test 2) unexpected device interrupts
Error!
UserdManager : Getting new USERD allocation at offset 2048
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb800
Warning: MSI for device 0000:1:00.0 not serviced
Error 020000002097 : Object.GenericBgTest_Thread unexpected device interrupts
Finished my run function
Calling my stop listeners:
Leaving RunThread
Allocated C361 USERMODE
Allocated C5B5 DMA_COPY
SetupCopyEngine
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
WfMatsBgStress Setup failed.
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU ACCESS_TYPE_VIRT_READ
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP -------------------------
txsw Events on chId=1 Saves=0 Restores=1 WFI=0 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=1 therefore no dynamic state
Bps: 0.0000 GB read or written per second (1.1325 GB in 17683440314.456 sec)
Bps: 0.0% percent of raw FB bw (448.0627 GB per second)
New unexpected HW interrupts have occurred, count = 1 (1 new)
GLStress Fps=0.00 Pps=0.00M
GLStress ElapsedRun time=0.01
GLStress ElapsedGpu time=17683440314.46
GLStress ElapsedGpuIdle time=0.0000
Background GLStress on dev 0 completed 400 frames.
GLStress "Post-Run" callback failed (Fifo: MMU Error).
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 512
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb200
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE4112FB0 ChanGrp: 7F7EE410FEF0 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
NVRM: ctxshareConstruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
Allocated chunk: phys=0x002400000, size=0x1e6666000, pte=0x06, displayable
AllocateEntireFramebuffer allocated 1 chunk(s), free memory left = 0x1f47a0000
pteKind 0x6
Memory allocation took: 0.014470 s
WfMats box height of 64
NewWfMats: Decode A00-B00-A10-C00-C00-A01-B00 (0x00428814) has 1945 boxes
NewWfMats: Decode A01-B01-A11-C01-C01-A00-B01 (0x01539905) has 1945 boxes
NewWfMats: Decode A10-B10-A00-C10-C10-A11-B10 (0x0260aa36) has 1946 boxes
NewWfMats: Decode A11-B11-A01-C11-C11-A10-B11 (0x0371bb27) has 1945 boxes
NewWfMats: Decode B00-A00-B10-D00-D00-B01-A00 (0x0406cc50) has 1945 boxes
NewWfMats: Decode B01-A01-B11-D01-D01-B00-A01 (0x0517dd41) has 1945 boxes
NewWfMats: Decode B10-A10-B00-D10-D10-B11-A10 (0x0624ee72) has 1945 boxes
NewWfMats: Decode B11-A11-B01-D11-D11-B10-A11 (0x0735ff63) has 1945 boxes
NewWfMats: Decode C00-D00-C10-A00-A00-C01-D00 (0x08ca009c) has 1946 boxes
NewWfMats: Decode C01-D01-C11-A01-A01-C00-D01 (0x09db118d) has 1946 boxes
NewWfMats: Decode C10-D10-C00-A10-A10-C11-D10 (0x0ae822be) has 1946 boxes
NewWfMats: Decode C11-D11-C01-A11-A11-C10-D11 (0x0bf933af) has 1946 boxes
NewWfMats: Decode D00-C00-D10-B00-B00-D01-C00 (0x0c8e44d8) has 1946 boxes
NewWfMats: Decode D01-C01-D11-B01-B01-D00-C01 (0x0d9f55c9) has 1946 boxes
NewWfMats: Decode D10-C10-D00-B10-B10-D11-C10 (0x0eac66fa) has 1946 boxes
NewWfMats: Decode D11-C11-D01-B11-B11-D10-C11 (0x0fbd77eb) has 1946 boxes
NewWfMats: NumBlitLoops is 16
PatternCount=32, BlitNumBoxes=1920, 60.0 reps.
Total Boxes = 31129, blit=30736 7684.0MB cpu=0 0.0MB (0.0%) unused=393
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Using 4 copy engine(s)
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1024
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb400
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1536
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb600
Allocated C361 USERMODE
NVRM: grProcessPreemptionStats_GP100: chId=2 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=2 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=2 Saves=1 Restores=1 WFI=1 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=2 therefore no dynamic state
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
GLStress ErrCounter::ExitStackFrame failed.
First error recorded: 97 unexpected device interrupts
JavaScript stack trace:
#0: Run() in <native>:0
#1: GenericBgTest_Thread() in gputest.jse:554
#2: apply() in <native>:0
#3: RunThread() in gputest.jse:601
Exit 020000002097 : GLStressTest.Run (test 2) unexpected device interrupts
Error!
UserdManager : Getting new USERD allocation at offset 2048
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb800
Warning: MSI for device 0000:1:00.0 not serviced
Error 020000002097 : Object.GenericBgTest_Thread unexpected device interrupts
Finished my run function
Calling my stop listeners:
Leaving RunThread
Allocated C361 USERMODE
Allocated C5B5 DMA_COPY
SetupCopyEngine
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
WfMatsBgStress Setup failed.
NewWfMatsTest::Cleanup
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 0
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 1024
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_READ
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU ACCESS_TYPE_VIRT_READ
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0002, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0x71, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x07:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B039E0 71 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B039F0 73 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A00 74 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A10 75 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU_NB ACCESS_TYPE_VIRT_WRITE
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP -------------------------
1 (0x0d9f55c9) has 1946 boxes
NewWfMats: Decode D10-C10-D00-B10-B10-D11-C10 (0x0eac66fa) has 1946 boxes
NewWfMats: Decode D11-C11-D01-B11-B11-D10-C11 (0x0fbd77eb) has 1946 boxes
NewWfMats: NumBlitLoops is 16
PatternCount=32, BlitNumBoxes=1920, 60.0 reps.
Total Boxes = 31129, blit=30736 7684.0MB cpu=0 0.0MB (0.0%) unused=393
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Using 4 copy engine(s)
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1024
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb400
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Allocated C361 USERMODE
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
UserdManager : Getting new USERD allocation at offset 1536
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb600
Allocated C361 USERMODE
NVRM: grProcessPreemptionStats_GP100: chId=2 GRAPHICS_PREEMPTION_OPTIONS=0x00000000 GfxP=NO
NVRM: grProcessPreemptionStats_GP100: chId=2 COMPUTE_PREEMPTION_OPTIONS=0x00000000 CILP=NO
NVRM: grProcessPreemptionStats_GP100: Ctxsw Events on chId=2 Saves=1 Restores=1 WFI=1 CTA=0 GfxP=0 CILP=0
NVRM: grProcessPreemptionStats_GP100: Dynamic GfxP not Enabled chId=2 therefore no dynamic state
Warning: MSI for device 0000:1:00.0 not serviced
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: ctxshareDestruct_IMPL CtxShare Ptr: 7F7EE45EC3C0 ChanGrp: 7F7EE4110710 !
NVRM: serverFreeResourceTree: hObject 0xbeef00e0 not found for client 0xc1d00050
NVRM: serverFreeResourceTree: hObject 0xbeef000c not found for client 0xc1d00050
GLStress ErrCounter::ExitStackFrame failed.
First error recorded: 97 unexpected device interrupts
JavaScript stack trace:
#0: Run() in <native>:0
#1: GenericBgTest_Thread() in gputest.jse:554
#2: apply() in <native>:0
#3: RunThread() in gputest.jse:601
Exit 020000002097 : GLStressTest.Run (test 2) unexpected device interrupts
Error!
UserdManager : Getting new USERD allocation at offset 2048
UserdAllocManaged : Successfully allocated USERD :
Actual Location : 0
Address(es) : 0x7f7eff3fb800
Warning: MSI for device 0000:1:00.0 not serviced
Error 020000002097 : Object.GenericBgTest_Thread unexpected device interrupts
Finished my run function
Calling my stop listeners:
Leaving RunThread
Allocated C361 USERMODE
Allocated C5B5 DMA_COPY
SetupCopyEngine
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
WfMatsBgStress Setup failed.
NewWfMatsTest::Cleanup
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 0
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 1024
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_READ
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU ACCESS_TYPE_VIRT_READ
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0002, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0x71, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x07:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B039E0 71 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B039F0 73 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A00 74 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A10 75 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
NVRM: _flcnQueueReaderReadHeader: error while reading from queue (id=0x3, status=0x5b).
NVRM: _flcnQueueReaderGetNextHeader: error reading header from queue (id=0x3, status=0x5b).
NVRM: flcnQueueReadData_IMPL: error reading header from queue (id=0x3, status=0xffff).
NVRM: _pmuProcessMessages: unexpected error while purging message queue (0x0000ffff).
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU_NB faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_WRITE
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU_NB ACCESS_TYPE_VIRT_WRITE
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0x96, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x09:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B03A60 96 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A70 98 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A80 99 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A90 9a ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU_NB ACCESS_TYPE_VIRT_WRITE
ERROR: ** ModsDrvBreakPoint **
------------------------- BEGIN ASSERT INFO DUMP -------------------------
ing RunThread
Allocated C361 USERMODE
Allocated C5B5 DMA_COPY
SetupCopyEngine
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
NVRM: Signature loaded from RAMFC is not valid
NVRM: bp @ ../../../../resman/kernel/fifo/fermi/fifog100.c:5098
ERROR: ** ModsDrvBreakPoint **
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
SetupCopyEngine
Allocated C5B5 DMA_COPY
WfMatsBgStress Setup failed.
NewWfMatsTest::Cleanup
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 0
UserdAllocManaged : Freeing USERD space
UserdManager : Releasing USERD allocation at offset 1024
Warning: MSI for device 0000:1:00.0 not serviced
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_READ
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU ACCESS_TYPE_VIRT_READ
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0002, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0x71, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x07:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B039E0 71 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B039F0 73 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A00 74 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A10 75 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
NVRM: _flcnQueueReaderReadHeader: error while reading from queue (id=0x3, status=0x5b).
NVRM: _flcnQueueReaderGetNextHeader: error reading header from queue (id=0x3, status=0x5b).
NVRM: flcnQueueReadData_IMPL: error reading header from queue (id=0x3, status=0xffff).
NVRM: _pmuProcessMessages: unexpected error while purging message queue (0x0000ffff).
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU_NB faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_WRITE
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU_NB ACCESS_TYPE_VIRT_WRITE
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0x96, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x09:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B03A60 96 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A70 98 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A80 99 ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03A90 9a ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
NVRM: _flcnQueueReaderReadHeader: error while reading from queue (id=0x3, status=0x5b).
NVRM: _flcnQueueReaderGetNextHeader: error reading header from queue (id=0x3, status=0x5b).
NVRM: flcnQueueReadData_IMPL: error reading header from queue (id=0x3, status=0xffff).
NVRM: _pmuProcessMessages: unexpected error while purging message queue (0x0000ffff).
NVRM: gmmuServicePriFaults_GV100: BAR2 MMU Fault
NVRM: MMU Fault: inst:0x0 dev:0x0 subdev:0x0
NVRM: MMU Fault: ENGINE BAR2 HUBCLIENT_HOST_CPU_NB faulted @ 0x0_006d4000. Fault is of type FAULT_INFO_TYPE_UNSUPPORTED_KIND ACCESS_TYPE_VIRT_WRITE
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x0
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
mods/core/utility/errloggr.cpp: GPU interrupt: MMU Fault : ENGINE_BAR2 FAULT_INFO_TYPE_UNSUPPORTED_KIND HUBCLIENT_HOST_CPU_NB ACCESS_TYPE_VIRT_WRITE
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x2
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x1
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM-RC: RM has detected engine or channel error
NVRM-RC: Channel Group=0x7
NVRM-RC: Type=45 [OS: Preemptive Channel Removal]
NVRM-RC: Attempting Recovery...
NVRM: fifoResetAndInitAfterError_v02_01: Reint channelId = 0x0007, for one stage RC
NVRM: perfRcErrorNotify_IMPL: No overclocking; skipping NV2080_CTRL_PERF_PERF_LIMIT_ID_RC_ERROR
NVRM: _flcnQueuePop_fb: Invalid MSG HDR length read > queueElementSize
unitId=0xbb, size=0xac, ctrlFlags=0xd0, seqNumId=0xba, queueElementSize=0x40
NVRM: _flcnQueuePop_fb: Dumping MSG Queue Entry 0x0b:
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf
8B03AE0 bb ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03AF0 bd ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03B00 be ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
8B03B10 bf ac d0 ba ff ff ff ff ff ff ff ff ff ff ff ff
NVRM: bp @ ../../../../resman/kernel/flcn/nv/flcnqueue_fb.c:332
ERROR: ** ModsDrvBreakPoint **
-------------------------- END ASSERT INFO DUMP --------------------------
MODS is exiting with failure after assert #5. Breakpoint limit exceeded.
Error 020000178818 : Global.VerifyErrorCode Mods detected an assertion failure
Error Code = 020000002097 (unexpected device interrupts)
####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########
Error 020000178818 : Global.PrintErrors Mods detected an assertion failure
Error 020000178818 : Global.PrintVbiosStatus Mods detected an assertion failure
Error 020000178818 : Global.PrintGpuTestErrors Mods detected an assertion failure
Quick and Dirty GPU shut down requested, skipping all steps.
Do end of sim check on Gpu256.
Затем я запускаю тест 1, вот файл журнала:
MODS start: Tue Feb 8 11:41:29 2022
Command Line : gputest.jse -oqa -old_gold -test 1 -dramclk_percent 100 -ignore_fatal_errors -run_on_error -fan_speed 75
CPU
Foundry : GenuineIntel
Name : Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz
Family : 6
Model : 12
Stepping : 3
Version
MODS : 400.221
OperatingSystem: Linux (x86_64)
Kernel : 4.17.4-gentoo
KernelDriver : 3.87
SBIOS Version : 2008
SBIOS Date : 08/12/2014
HostName : tinylinux
Sys-uuid : 49367940-D85F-11DD-B38E-F07959623F57
GPU 0 [01:00.0] dev.sub 0.0
----------------------------------------
DevInst : 0
PCI Location : 0x00, 0x01, 0x00, 0x00
GPU DID : 0x1f07
PDI : 0xeadfe819c7b0a945
Raw ECID : 0x010032c00000005202c41991
Raw ECID (GHS) : 0x1645202c4180000000b018200
ECID : PKWB46-11_x03_y08
Device Id : TU106
Revision : a1
NV Base : 0xf6000000
FB Base : 0xe0000000
IRQ : 11
Setting Fan 1 of GPU 0 [01:00.0] to 75%
Foundry : TSMC
Subsystem VID : 0x1458
Subsystem DID : 0x37ad
Board ID : 0x00d9
Chip SKU : 400-A
Project : G160-0052
Fuse File Fmt : JSON
Display : 0x00000200 (id)
SBIOS Init : Secondary
Native Mode : 1280x1024
Memory Size : 8192 MB
FB Vendor : Micron
RAM Protocol : GDDR6
RAM Config : 1
ROM Version : 90.06.18.40.02
ROM Type : Partner Production
ROM OEM Vendor : NVIDIA
ROM Timestamp : 2018-8-21 15:45:51
ROM Expiration : 2018-12-31 14:45:51
ROM GUID : B3C8A38736D04F76A997167A4C5AB541
PPC Pri/Sec FW : Unknown
PPC Driver Ver : Unknown
PState (mode) : 8 5 3 2 [0]
PState Version : 3.5
EDC : Disabled
GPC Clock : 1980.0/1978.5 MHz NAFLL
DRAM Clock : 7001.0/7007.5 MHz DEFAULT
Host Clock : 1440.0/1439.9 MHz NAFLL
XBar Clock : 1890.0/1878.3 MHz NAFLL
Sys Clock : 1980.0/1970.7 MHz NAFLL
Power Clock : 540.0/541.5 MHz DEFAULT
NVDec Clock : 1830.0/1816.6 MHz NAFLL
Display Clock : 1330.0/1329.7 MHz DEFAULT
NVVDD : 1050 mV
GPC Mask : 0x07 (3 GPCs)
TPC Mask : [3f 3f 3f] (18 TPCs)
FB Mask : 0x0f (4 FB Partitions)
ROP/L2 Mask : [3 3 3 3] (8 ROP/L2s)
PES Mask : [7 7 7] (9 PESes)
FBIO Mask : 0x0f (4 FBIO Partitions)
FBIO Shift Mask: 0x00
XP Mask : 0x03 (2 3gio Pads)
Nvdec Mask : 0x07 (3 engines)
Nvenc Mask : 0x01 (1 engine)
Gpu Temp : 35 deg C
PEX Rx Lanes : 0xffff
PEX Tx Lanes : 0xffff
PEX Det. Lanes : 0xffff
PEX Width, ASLM: 16 lanes, Not Supported
PEX Link Speed : 8.0 Gbit/s
PEX BandWidth : 128.0 Gbit/s
ASPM, ASPM-CYA : (L0s/L1, Disabled)
ASPM L1SS, CYA : (Disabled, L1.1/L1.2)
LTR : Enabled
Chipset
VID : 8086 (Intel)
Chipset DID : 0C00 (Unknown)
Chipset ASPM : L0s/L1
Chipset LTR : Enabled
RM Version : rel/gpu_drv/r400/r400_00-535
resumehandler.js: 1
gputest.js : 29
oqa.spc : 3
boards.js : 3
Running test(s) on GPU 0 [01:00.0] (DID: 0x1f07)
Enter JsGpuTest.SetPState (test 0)
Switched to PState 0 (0.max). Pcie Speed=8000, x16
ClkM = 7000.98 MHz
ClkHost = 1440.00 MHz
ClkDisp = 1330.00 MHz
ClkGpc = 1980.00 MHz
ClkXbar = 1890.00 MHz
ClkSys = 1980.00 MHz
ClkHub = 810.00 MHz
ClkPwr = 540.00 MHz
ClkNvd = 1830.00 MHz
ClkPexGen = 3.00
NVVDD = 1056 mV
Exit 000000000000 : JsGpuTest.SetPState (test 0) ok
Enter JsGpuTest.CheckConfig (test 1)
ERROR: GPU RGB MCU not found on I2C bus
Error 020000001575 : GpuSubdevice.GetRgbMcuFwVersion I2C device not found
ERROR: Error retrieving the GPU RGB MCU FW version
Exit 020000001575 : JsGpuTest.CheckConfig (test 1) I2C device not found
Error!
Error 020000001575 : JsGpuTest.Run (test 1) I2C device not found
GPU tests completed.
Failure(s) :
LOOP TEST CODE MESSAGE
---- ------------------------ ------------ ---------------------------
1 CheckConfig 020000001575 I2C device not found
Error Code = 020000001575 (I2C device not found)
####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########
MODS end : Tue Feb 8 11:41:33 2022 [4.081 seconds (00:00:04.081 h:m:s)]
Тогда я думаю, может быть, проблема с i2c, я запускаю тест 293, вот файл журнала:
MODS start: Tue Feb 8 11:42:49 2022
Command Line : gputest.jse -oqa -old_gold -test 293 -dramclk_percent 100 -ignore_fatal_errors -run_on_error -fan_speed 75
CPU
Foundry : GenuineIntel
Name : Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz
Family : 6
Model : 12
Stepping : 3
Version
MODS : 400.221
OperatingSystem: Linux (x86_64)
Kernel : 4.17.4-gentoo
KernelDriver : 3.87
SBIOS Version : 2008
SBIOS Date : 08/12/2014
HostName : tinylinux
Sys-uuid : 49367940-D85F-11DD-B38E-F07959623F57
GPU 0 [01:00.0] dev.sub 0.0
----------------------------------------
DevInst : 0
PCI Location : 0x00, 0x01, 0x00, 0x00
GPU DID : 0x1f07
PDI : 0xeadfe819c7b0a945
Raw ECID : 0x010032c00000005202c41991
Raw ECID (GHS) : 0x1645202c4180000000b018200
ECID : PKWB46-11_x03_y08
Device Id : TU106
Revision : a1
NV Base : 0xf6000000
FB Base : 0xe0000000
IRQ : 16
Setting Fan 1 of GPU 0 [01:00.0] to 75%
Foundry : TSMC
Subsystem VID : 0x1458
Subsystem DID : 0x37ad
Board ID : 0x00d9
Chip SKU : 400-A
Project : G160-0052
Fuse File Fmt : JSON
Display : 0x00000200 (id)
SBIOS Init : Secondary
Native Mode : 1280x1024
Memory Size : 8192 MB
FB Vendor : Micron
RAM Protocol : GDDR6
RAM Config : 1
ROM Version : 90.06.18.40.02
ROM Type : Partner Production
ROM OEM Vendor : NVIDIA
ROM Timestamp : 2018-8-21 15:45:51
ROM Expiration : 2018-12-31 14:45:51
ROM GUID : B3C8A38736D04F76A997167A4C5AB541
PPC Pri/Sec FW : Unknown
PPC Driver Ver : Unknown
PState (mode) : 8 5 3 2 [0]
PState Version : 3.5
EDC : Disabled
GPC Clock : 1980.0/1977.3 MHz NAFLL
DRAM Clock : 7001.0/7004.6 MHz DEFAULT
Host Clock : 1440.0/1439.9 MHz NAFLL
XBar Clock : 1890.0/1876.2 MHz NAFLL
Sys Clock : 1980.0/1966.6 MHz NAFLL
Power Clock : 540.0/540.1 MHz DEFAULT
NVDec Clock : 1830.0/1816.9 MHz NAFLL
Display Clock : 1330.0/1325.2 MHz DEFAULT
NVVDD : 1050 mV
GPC Mask : 0x07 (3 GPCs)
TPC Mask : [3f 3f 3f] (18 TPCs)
FB Mask : 0x0f (4 FB Partitions)
ROP/L2 Mask : [3 3 3 3] (8 ROP/L2s)
PES Mask : [7 7 7] (9 PESes)
FBIO Mask : 0x0f (4 FBIO Partitions)
FBIO Shift Mask: 0x00
XP Mask : 0x03 (2 3gio Pads)
Nvdec Mask : 0x07 (3 engines)
Nvenc Mask : 0x01 (1 engine)
Gpu Temp : 33 deg C
PEX Rx Lanes : 0xffff
PEX Tx Lanes : 0xffff
PEX Det. Lanes : 0xffff
PEX Width, ASLM: 16 lanes, Not Supported
PEX Link Speed : 8.0 Gbit/s
PEX BandWidth : 128.0 Gbit/s
ASPM, ASPM-CYA : (L0s/L1, Disabled)
ASPM L1SS, CYA : (Disabled, L1.1/L1.2)
LTR : Enabled
Chipset
VID : 8086 (Intel)
Chipset DID : 0C00 (Unknown)
Chipset ASPM : L0s/L1
Chipset LTR : Enabled
RM Version : rel/gpu_drv/r400/r400_00-535
resumehandler.js: 1
gputest.js : 29
oqa.spc : 3
boards.js : 3
Running test(s) on GPU 0 [01:00.0] (DID: 0x1f07)
Enter JsGpuTest.SetPState (test 0)
Switched to PState 0 (0.max). Pcie Speed=8000, x16
ClkM = 7000.98 MHz
ClkHost = 1440.00 MHz
ClkDisp = 1330.00 MHz
ClkGpc = 1980.00 MHz
ClkXbar = 1890.00 MHz
ClkSys = 1980.00 MHz
ClkHub = 810.00 MHz
ClkPwr = 540.00 MHz
ClkNvd = 1830.00 MHz
ClkPexGen = 3.00
NVVDD = 1056 mV
Exit 000000000000 : JsGpuTest.SetPState (test 0) ok
Enter I2cDcbSanityTest.Run (test 293)
ERROR: POWER_CTRL_UP9512 I2C device (type=0x47) not found on I2C Port 0x02 at I2C Address 0x4a
Exit 020000293575 : I2cDcbSanityTest.Run (test 293) I2C device not found
Error!
GPU tests completed.
Failure(s) :
LOOP TEST CODE MESSAGE
---- ------------------------ ------------ ---------------------------
1 I2cDcbSanityTest 020000293575 I2C device not found
Error Code = 020000293575 (I2C device not found)
####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########
MODS end : Tue Feb 8 11:42:52 2022 [3.890 seconds (00:00:03.890 h:m:s)]
На видеокарте два uP9512P, я поменял местами один на другой, думая, что у одного плохая схема i2c внутри, но результат тот же. Я проверил сопротивление на ADDR/FSW: - Верхний чип: ~ 31 кОм на 1,8 В, ~ 31 кОм на GND - Нижний чип: ~12 кОм на 1,8В, ~16 кОм на GND Я смотрю в неправильном месте для проблемы? Эта ошибка кажется довольно редкой в Интернете... Может кто-нибудь дать совет? Большое спасибо! Тinynja
|
|
|
|
 |
|
Tinynja
[ТС]
|
Заголовок сообщения: Re: Gigabyte RTX 2070 mods fail Добавлено: 09 фев 2022, 21:16 |
| Я тут случайно |
|
|
Зарегистрирован: 19 янв 2022, 20:42
Наличности на руках:
3.04
Сообщения: 3
Откуда: Canada
|
|
Хахаха ты прав надо было начать с симптомов карты ^^
Таким образом, карта отлично работает без драйверов (определяется быстро, выводит изображение, вентиляторы крутятся, светодиоды загораются и меняют цвет), но когда я устанавливаю драйвер, он сильно тормозит, и через некоторое время появляется BSOD с DPC_WATCHDOG_VIOLATION.
И, к сожалению, у него память Micron... Я не знаю, как проверить дату?
Спасибо за помощь!
|
|
|
|
|
|
|
Pandemonium6
|
Заголовок сообщения: Re: Gigabyte RTX 2070 mods fail Добавлено: 09 фев 2022, 22:42 |
| Продвинутый форумчанин |
 |
 |
Зарегистрирован: 22 июл 2021, 03:06
Наличности на руках:
1,139.72
Сообщения: 761
Откуда: Holand
|
https://www.micron.com/support/tools-and-utilities/fbgaRead around... Posted after 10 minutes 9 seconds:Error Code = 020000293575 (I2C device not found) When there are two the same PWM chips they have to have unique addresses on the i2c bus. It looks like address conflict, bus is shorted, not pulled up, any other device connected to the bus makes problems. There was an error about missing RGB LED controller. In general test the i2c. First, what could be the most obvious, use a thermal camera and then use en oscilloscope to validate logic levels and the shape.
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Страница 1 из 1 [ Сообщений: 6 ] |
|
|
Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения
|
|
