| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| same memory chip fails at puting load on card https://vlab.su/viewtopic.php?f=48&t=116698 |
Страница 1 из 1 |
| ilie321 [ 24 июн 2021, 16:15 ] | |
| Заголовок сообщения: | same memory chip fails at puting load on card |
Hello any idea why same chips die if i open any graphical content? i measured temperature and nothing, voltage same and all other chips are using same voltage why only one die? E1 as position GTX780 windforce old card it die in 2 3 seconds ; thank you |
|
| aleksros [ 24 июн 2021, 16:43 ] | |
| Заголовок сообщения: | Re: same memory chip fails at puting load on card |
the GPU probably died in this memory channel. just when a memory is transplanted, it temporarily bounces back. if you give a load, it fails again)) try to put the removed memory chips from this channel on another card - then everything will immediately become clear. |
|
| ilie321 [ 24 июн 2021, 17:58 ] | |
| Заголовок сообщения: | Re: same memory chip fails at puting load on card |
thank you i killed 2 chips ;i tested and they are dead on another card also; mats give maximum errors for E1; if i put new chip it works until i put load then it is dead ; it is not important :) because is old card but i never seen something like this ; it started to fail on another chip initially so i changed it and it worked ok. now this E1 problem start to appear. |
|
| ilie321 [ 25 июн 2021, 15:31 ] | |
| Заголовок сообщения: | Re: same memory chip fails at puting load on card |
You were right. Heating it make it work for a little bit. thank you. Seams that i fail to solder chip on another board and it gived me error. |
|
| Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|