Hello to the whole team
after repairing circuits, I have an error in the memories on the graphics card in the read part.
If anyone has an idea how to repair it, or is it just replacing all the memory modules?



Image: https://imgur.com/a/KsvBjCz

You are not using the mats properly.
Give the card to a repair service, pls.

Which is MOST correct for the RTX 3090?

for GA102 tests, you need to use not mats but mods - training memory

https://www.youtube.com/watch?v=QNGOVUf ... ix-Germany

https://www.youtube.com/watch?v=LxXNKQDr94A&t=138s

https://www.youtube.com/watch?v=-4W_qCB ... nel=VIK-on

test picture - from VIK_ON

very top
I don't know what software they use, but I use one that I already left there. I have a photo here of the test I did, and the best part is that it says there is no error.

was using MATS 455.127

img: https://ibb.co/rx4grVn



before:
It came to me with oxidation in 2 points and it didn't turn on, nor was it powered. At this moment it connects, it was installed in 2 graphs, it gives error 43.
does not output any image