Hello everyone,
I have just got my hands on a Creative Banshee AGP with a bunch o parts that have been knocked off it.
What is missing:
Near VGA port:
L1 = ?
Above the GPU:
C40 = ?
RP7 = 33 OHM 4-stage resistor array in 1206 package
C47 = ?
C48 = ?
R47 (seems only re-seating might be needed)
Near one of the memory chips:
C113 = 0.1uF 0603 package
The card is also scratched on several places, but traces seem fine. So far I was able to identify that RP7 should be a 33OHM resistor network in 1206 package based on the card's pictures online and measurements. However, I have no idea what are the values of the other components. Especially the L1 near the VGA port.
Any help greatly appreciated.
Posted after 3 hours 54 minutes 8 seconds:
So after digging in the memory chip datasheet, I've found the capacitor value for C113, seems it's 0.1 uF as it's positioned between Vddq and Vssq
