Here is the answer
| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY https://vlab.su/viewtopic.php?f=48&t=83810 |
Страница 1 из 1 |
| bokin021 [ 05 дек 2018, 15:08 ] | |
| Заголовок сообщения: | Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
I need shematic or board view ,because no 1.1v on GPU ,i check all fuse also mosfet no short and i notice that EN signal does not come on pin 4 on NCP81174..I cant find way out from where enable must come .. |
|
| kolyandex [ 05 дек 2018, 18:52 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
Do you mean 1.1 volts on PCI-e controller (PEX_VDD) or on GPU (NVVDD)? Just GPU powered by 0.8 volts. |
|
| bokin021 [ 05 дек 2018, 19:11 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
No I mean on GPU controller EN..Reason why is not 0.8v on gpu Can i bay somewhere boardview for this graphic card? |
|
| kolyandex [ 06 дек 2018, 06:58 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
NVVDD will appear after powering on 1.8 volts step down converter. Does 8 pin on BIOS have 1.8 volts? |
|
| bokin021 [ 06 дек 2018, 22:25 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
No 0.3v on bios.. |
|
| kolyandex [ 07 дек 2018, 04:58 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
Here is the answer
|
|
| bokin021 [ 10 дек 2018, 18:43 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
I check ,bios 1,8v I have it s mean I must find out from where coming en signal ,it will be difficult without schematic ..If with power supply I do 1v on enable ,maybe will come 0.8v on phase ?Or is dangers? |
|
| bokin021 [ 18 дек 2018, 21:13 ] | |
| Заголовок сообщения: | Re: Problem graphic card gtx10606PB (GeForce GTX 1060 6GB) PNY |
i found problem Posted after 31 second: it was small resistor damage |
|
| Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|