hi guys
i have a motherboard here that at first point it had water damage and ACDRV=0V
i find a shorted capacitor (PC114) and replace it
now B+=19V, 3.3V and 5V are on
i have 3.3 on L9,power key and on/off#
but there is no respond to power key or AC plug
when i plug in, it use 0.1A but no light on Charg_ LED or acin_Led

how can i find that kbc is alive?

acin, lid_sw#, ec_rst#, adp_id, ec_rsmrst#, 1.1valw ???
Write u42.
(I used LA-8714P)

ACIN=3.3V
LID_SW#=3.3V
EC_RST#=3V
ADP_ID=0.6V
EC_RSMRST#=0V
i use LA-8713 Schematic and couldn't find 1.1ALW
on UH2 and UH5 voltages are 0V

Sorry, i have no LA-8713P schematiic.
Therefore, I can not specify.
But, if the conditions are met, then the multicontroller should raise EC_RSMRST#.

sorry i mean LA-8711 Schematic

i replace KBC with KB930QF A1 but no change