Hello..

This board doesn't have schematics or boardviews, not for this one nor of any other models built with similar design was found

Please if someone have a working board in hand I need the value of this resistor in the image:




also needed voltage measurements on all coils on the board in both standby & working state:



L60000 = Batt+
L66310 = VCC_Core or VCC_GT
L66010 = VCC_Core or VCC_GT
? =
L200 =
L66610 =
L60500 =
L60800 =
L61400 =
L60100 = +3VALW
L60400 =
L2900 = Thunderbolt power
L60200 = +5VALW
L60600 =
L60300 = RAM power

This is a capacitor. The same as the adjacent ones of the same color.

No it's a burned resistor... here's a closer look with some measurements:



the burned resistor "measures 44Kohms" is a pull-up selector between 1.8v & 3v wich i can't trace where it goes..

the one goes from 3v to the pch is 0 ohms