Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
L850 (DK10FG-6050A2509901-MB-A02) Discrete to UMA https://vlab.su/viewtopic.php?f=54&t=102764 |
Страница 1 из 1 |
mohammedsf [ 17 май 2020, 04:09 ] | |
Заголовок сообщения: | L850 (DK10FG-6050A2509901-MB-A02) Discrete to UMA |
Good afternoon, on this motherboard, the power supply and control components of the processor's video core aren't soldered.. according to the schematics, TPS51650 (U6600) is in 3+0 mode for discrete graphics, the schematics has a table showing resistors setup for 3+2 mode to enable UMA.. did anyone try to cut the power on the discrete GPU and solder all missing chips and components and set U6600 to UMA mode ? should it successfully work ? is BIOS flashing needed ? Thanks in advance |
t74f [ 17 май 2020, 10:45 ] | |
Заголовок сообщения: | Re: L850 (DK10FG-6050A2509901-MB-A02) Discrete to UMA |
Technically, it is possible, But it's easier to buy a board with UMA Graphics |
mohammedsf [ 19 май 2020, 03:50 ] | |
Заголовок сообщения: | Re: L850 (DK10FG-6050A2509901-MB-A02) Discrete to UMA |
t74f писал(а): Technically, it is possible, But it's easier to buy a board with UMA Graphics Thanks for reply, it's not an easier option for me where I live, also I can't order it from abroad since the whole country is locked down.. Can't believe I'm the first one trying this conversion! I'll give it a try an hope it works, will be happy to reply with good news :) |
mohammedsf [ 09 июн 2022, 06:22 ] | |
Заголовок сообщения: | Re: L850 (DK10FG-6050A2509901-MB-A02) Discrete to UMA |
The first board failed with intel graphics driver, another board came but decided to do full conversion this time, it works flawlessly with intel graphics driver running and no bios mod needed Here is how to: U6600 3+0 to 3+2: Under U6600: iGPU Phases: Under iGPU Phases: PCH: Under PCH: Disable 3.3v_DGPU Power: Disable 1.8v_DGPU Power: Disable 1.5v_DGPU Power: Graphics Driver: |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |