my programmer is TVP2589U+ , I have use this schematic of this adapter to make connections
and i considered the internal chip is 25X10
| Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
| g500 (la-9632p) kb9012 programming https://vlab.su/viewtopic.php?f=58&t=41693 |
Страница 1 из 1 |
| ayad [ 04 фев 2016, 15:51 ] | |
| Заголовок сообщения: | g500 (la-9632p) kb9012 programming |
hi all ,I wanted to programming the kb9012 using my ISP programming so I have done this connections : pin(59)kb9012 to pin(1) ISP programmer pin(60)kb9012 to pin(6) ISP programmer pin(61)kb9012 to pin(5) ISP programmer pin(62)kb9012 to pin(2) ISP programmer pin(9)kb9012 to pin(8) ISP programmer GND to pin(4) ISP programmer but when I want to read , i have got error , the kb9012 is ok so what should i do to read that file |
|
| and555 [ 05 фев 2016, 10:49 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
ayad писал(а): pin(1) ISP programmer what is the name of your ISP programmer? |
|
| ayad [ 05 фев 2016, 15:27 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
my programmer is TVP2589U+ , I have use this schematic of this adapter to make connections and i considered the internal chip is 25X10 |
|
| ayad [ 06 фев 2016, 10:51 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
pin(42) of KB9012 to GND , and i have got error , please can any one give me the specifications of internal flash to add it to my programmer DEVICE ID MANFACTURER ID PROGRAM MODE PAGE SIZE |
|
| Voodoo_r [ 06 фев 2016, 21:59 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
Ask the author of this theme. I use this programmer and no problems. |
|
| ayad [ 07 фев 2016, 20:55 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
What programmer do you use ? |
|
| ayad [ 08 фев 2016, 10:57 ] | |
| Заголовок сообщения: | Re: g500 (la-9632p) kb9012 programming |
as I have read kb9012 datasheet , i have found than pin 42 and pin 41 must grounded , so users can flush and program a SPI flash via specific IKB pins with external tool please just i need these information of kb9012 internal flash: DEVICE ID MANFACTURER ID PROGRAM MODE PAGE SIZE |
|
| Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|