Ремонт: Ноутбуков, Компьютеров https://vlab.su/ |
|
Acer Aspire V3-571G (LA-7912P) Not power on https://vlab.su/viewtopic.php?f=59&t=20929 |
Страница 1 из 1 |
kandyan [ 23 апр 2014, 22:15 ] | |
Заголовок сообщения: | Acer Aspire V3-571G (LA-7912P) Not power on |
I have Acer Aspire V3-571G (LA-7912P) which is not functioning properly. 01. There is 3.3v and 5v present 02. No SUSP# and SYSON When i pressed power button laptop power on for few seconds and turn off. Since there is no SUSP#, I suspect there might be a problem in both ROMs U42 and U36. Still I am not re program BIOS and could you please tell me which ROM chip i must re-program? |
kandyan [ 24 апр 2014, 08:33 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
help me plz...anyone? |
kandyan [ 24 апр 2014, 22:19 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
I reprogrammed the BIOS but problem exist? any ideas? |
jurmala [ 24 апр 2014, 23:03 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
plz http://vlab.pp.ru/viewtopic.php?p=59795#p59795 In English: 0. When BIOS & EC-firmware 100% are working 1. When EC power is present, his quartz working and EC reading the bios data (look data exchange on BIOS chip an oscilloscope) 2. When ACIN = 3.3V 3. When LID_SW# = 3.3V 4. When EC drop RESET from SouthBridge, т.е. EC_RSMRST# = 3.3V 5. When by pressing of the power button the signal ON/OFFBTN# falls to zero and the same signal is broadcast in PBTN_OUT# 6. When from the SouthBridge signals PM_SLP_S3# and SLP_S5# are drop, i.e. voltage on them will be 3.3V Under these conditions EC should give command for start. |
orbit [ 25 апр 2014, 01:28 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
kandyan писал(а): I reprogrammed the BIOS Что именно и в какие микросхемы вы программировали? Там есть несколько вариантов. |
kandyan [ 25 апр 2014, 12:27 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
jurmala писал(а): plz http://vlab.pp.ru/viewtopic.php?p=59795#p59795 In English: 0. When BIOS & EC-firmware 100% are working 1. When EC power is present, his quartz working and EC reading the bios data (look data exchange on BIOS chip an oscilloscope) 2. When ACIN = 3.3V 3. When LID_SW# = 3.3V 4. When EC drop RESET from SouthBridge, т.е. EC_RSMRST# = 3.3V 5. When by pressing of the power button the signal ON/OFFBTN# falls to zero and the same signal is broadcast in PBTN_OUT# 6. When from the SouthBridge signals PM_SLP_S3# and SLP_S5# are drop, i.e. voltage on them will be 3.3V Under these conditions EC should give command for start. Good point I checked some of these voltages but i missed few. I'll let you know the results.thnx |
kandyan [ 29 апр 2014, 16:01 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
BIOS and EC flashed but no success. I suspect EC is bad but i dont have the chip right now for testing. |
orbit [ 30 апр 2014, 00:28 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on |
Озвучте напряжения на cpu в момент включения и сопротивление на шинах питания cpu и gpu. Так может быть как при не исправном cpu и его цепей питания, так и при не исправном gpu. В любом случае EC предпочитает отключить ноутбук. |
kandyan [ 07 дек 2014, 11:52 ] | |
Заголовок сообщения: | Re: Acer Aspire V3-571G (LA-7912P) Not power on [РЕШЕНО] |
After I reballed the PCH SUSP# and SYSON signals are back and laptop turned on. I think dry contacts on PCH is the problem. I use this methode to repair dead laptops such as Acer V3,E1 , Dell 3521, HP 15n. Thanks for helping me. |
Страница 1 из 1 | Часовой пояс: UTC + 4 часа |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |