Hi guys
This board had allitle water damage
In pq6,u21,u22 area
I clear water damage

Now when i plug ac and press power key at first it use 0.18A
After 2-3sec change to 0.07A and turn off
This cycle repeat again and again

After meny many times that i remove ac and plug it and turn on, it show display finaly
First 0.18A next 0.07A and next 0.9A then display

If it one time boot and show display, then it boot up for next times that i turned it on
But if i leave it off for hours, when plug ac, its in restart loop

Check this point:

nice
it was exactly true

tnx