PoliceCam IPC-615P циклически перезагружается, помогите по логу посмотреть что ей не дает дальше грузится?
hi3516cv300 System startup
Uncompress.......Ok
hi3516cv300 System startup
U-Boot 2010.06-svn2314 (Aug 03 2017 - 17:33:19)
DRAM: 256 MiB
Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0xc8 0x40 0x18
Block:64KB Chip:16MB Name:"GD25Q128"
SPI Nor total size: 16MB
MMC:
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
In: serial
Out: serial
Err: serial
*No SD card found!
Hit any key to stop autoboot: 0
16384 KiB hi_fmc at 0:0 is now current device
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.18.20
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1895159 Bytes = 1.8 MiB
Load Address: 80008000
Entry Point: 80008000
Loading Kernel Image ... OK
OK
Starting kernel ...
я
hi3516cv300 System startup
Uncompress.......Ok
hi3516cv300 System startup
U-Boot 2010.06-svn2314 (Aug 03 2017 - 17:33:19)
DRAM: 256 MiB
Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0xc8 0x40 0x18
Block:64KB Chip:16MB Name:"GD25Q128"
SPI Nor total size: 16MB
MMC:
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
t any key to stop autoboot: 0
16384 KiB hi_fmc at 0:0 is now current device
t any key to stop autoboot: 0
16384 KiB hi_fmc at 0:0 is now cur## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.18.20
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1895159 Bytes = 1.8 MiB
Load Address: 80008000
Entry Point: 80008000
Loading Kernel Image ... OK
OK
Starting kernel ...
на * останавливается, но просит пароль:
hi3516cv300 System startup
Uncompress.......Ok
hi3516cv300 System startup
U-Boot 2010.06-svn2314 (Aug 03 2017 - 17:33:19)
DRAM: 256 MiB
Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0xc8 0x40 0x18
Block:64KB Chip:16MB Name:"GD25Q128"
SPI Nor total size: 16MB
MMC:
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
In: serial
Out: serial
Err: serial
*No SD card found!
Hit any key to stop autoboot 0
UBOOT# setenv dh_keyboard 0
password is error, Please input a correct password:
UBOOT# 123456
password is error, Please input a correct password:
UBOOT# help
password is error, Please input a correct password:
UBOOT# admin
password is error, Please input a correct password:
UBOOT# printenv
password is error, Please input a correct password:
UBOOT#
