I'm trying to repair this rx580 msi card
it shows all the voltages are perfect ,12v, 5v, 3.3v, 1.8 , vram 1.5 ,ram control 0.9 , vcore 0.9. the resistance for all to ground looks normal too. when powering the card the core is getting hot too but the card gives no beeps or display on boot. I try with another card and make this one as a secondry, the motherboard beeps and boot and the card is being detected. I tried to flash the Vbios at DOS and it accepts flashing too. I tried different roms too. but I'm still getting no beeps or boot as a primary card. Somebody can help?

Если все питания в норме и биос в порядке, то я рекомендую прогнать карту tserver. Загружать нужно со встройки и командой
./agt -i (отобразить список подключенных видеокарт AMD)
./agt -mccfg -i=1 (тип и объем памяти второй видеокарты в списке под номером 1)
После первой команды посмотреть определилась ли ваша карта
После этого ввести вторую команду с номером на конце соответствующую вашей карте.
Посмотреть на результат теста.

Thank you for your reply. I understand there is application I may try those commands on. do you have a link to download ? Thanks for your help

Hi, you have to read this topic backwards viewtopic.php?f=48&t=100822&start=1200 but in order to have access to files and links I recommend you support this forum by $99 via paypal.

Thank you for your reply and your help. I'm going to read that topic.

I've done the following
./tserver -boardtest=memfa
I got fail then pico memfa.log and I got the following screen


it looks I have errors on 6 chips and 2 are ok. what do u advice?
the chips are hynix
sk hynix
h5gc4h24aja

---

Posted after 49 seconds:
https://drive.google.com/file/d/1bNGCGb ... p=drivesdk