Hello
any idea why same chips die if i open any graphical content?
i measured temperature and nothing, voltage same and all other chips are using same voltage why only one die? E1 as position GTX780 windforce old card
it die in 2 3 seconds ;
thank you

the GPU probably died in this memory channel. just when a memory is transplanted, it temporarily bounces back. if you give a load, it fails again))
try to put the removed memory chips from this channel on another card - then everything will immediately become clear.

thank you

i killed 2 chips ;i tested and they are dead on another card also; mats give maximum errors for E1;
if i put new chip it works until i put load then it is dead ;
it is not important :) because is old card but i never seen something like this ; it started to fail on another chip initially so i changed it and it worked ok.
now this E1 problem start to appear.

You were right. Heating it make it work for a little bit. thank you. Seams that i fail to solder chip on another board and it gived me error.