Помогите, пожалуйста, определить недостающие детали на фотографиях.

If i’m not mistaking this is simillar with msi design…
I’ll try to find a zotac board and share some pictures

---

Posted after 3 hours 39 minutes 35 seconds:
you are out of luck, my rtx3070 from zotac is not the same as holo one. but if resistor r741 is used for "PS_NVVDD_SNUB_PH7" and "GND"
you can trace with a multimeter and see where the missing part paad is connected to.
then use the bv and schematic i provide you and determine which is the value and the missing component...

i used this to repair my zotac 3070 which had a hole underneath the r741 area

good luck!