MODS start: Fri Apr 5 22:07:11 2024

Command Line : gputest.js -oqa -old_gold

CPU
Foundry : GenuineIntel
Name : 12th Gen Intel(R) Core(TM) i3-12100
Family : 6
Model : 7
Stepping : 5

Version
MODS : 400.281
OperatingSystem: Linux (x86_64)
Kernel : 4.17.4-gentoo
KernelDriver : 3.87
SBIOS Version : 1220
SBIOS Date : 08/02/2023
HostName : tinylinux

GPU 0 [01:00.0] dev.sub 0.0
----------------------------------------
DevInst : 0
PCI Location : 0x00, 0x01, 0x00, 0x00
GPU DID : 0x1e81
PDI : 0xb2fa0a8ee3caf12b
Raw ECID : 0x004033800000006c32c10d91
Raw ECID (GHS) : 0x1646c32c10c0000000e018080
ECID : PR3B13-14_x03_y02
Device Id : TU104
Revision : a1
NV Base : 0x92000000
FB Base : 0x80000000
IRQ : 11
WARNING: GPU 0 [01:00.0] PCIE speed capability (8000Gbps) higher than down stream port link speed (2500Gbps)

ERROR: ** ModsDrvBreakPoint **

------------------------- BEGIN ASSERT INFO DUMP -------------------------
dex 0
Error: Can't find Pci device with class code 0x60a00, index 0
Error: Can't find Pci device with class code 0x60b00, index 0
Error: Can't find Pci device with class code 0x60b01, index 0
Error: Can't find Pci device with class code 0x68000, index 0
Setup dma base only supported on PPC, skipping
Chipset::FindMcps()
Found (0, 0, 31, 0) with cc = 0x60100, vid = 0x8086, did = 0x7a06
Intel found.
Error: Can't find Pci device with class code 0x60100, index 1
Error: Can't find Pci device
Chipset::FindMcps() finished
Chipset::FindCrush()
Found vendor ID 0x8086, deviceID 0x4630
WARNING: Unknown crush device ID 0x4630
Found (0, 0, 31, 4) with cc = 0xc0500, vid = 0x8086, did = 0x7a23
INTEL - SMBus: DeviceId: 0x7a23.
Found 1 devices
EC Device not found on Smbus
ACPI: Unable to evaluate dev method (PG00._STA) on 0:0:1.0
ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0
GF100GpuSubdevice: FloorsweepingAffected=0
GF100GpuSubdevice: Floorsweeping parameters present on commandline:
GF100GpuSubdevice: Floorsweeping parameter mask values: display=0x0 msdec=0x0 msvld=0x0 fbio_shift_override=0x0 ce=0x0 gpc=0x0 fb=0x0 fbio=0x0 fbio_shift=0x0 gpctpc[0]=0x0 gpctpc[1]=0x0 gpctpc[2]=0x0 gpctpc[3]=0x0 gpctpc[4]=0x0 gpctpc[5]=0x0 gpctpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0
GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline:
GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0
GM10xGpuSubdevice: Floorsweeping parameters present on commandline:
GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0
GM20xGpuSubdevice: Floorsweeping parameters present on commandline:
GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
TU10x floorsweeping parameters present on commandline:
TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0
Unknown init property : FbGddr5x8Mode
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x12
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14
NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB
NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC
NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC
NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57
NVRM: *** Chipset Setup Function Error!
NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains.
NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0
NVRM: -----------------------------------------------------------------------------------
NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
NVRM: -----------------------------------------------------------------------------------
NVRM: _ReadDPCDTps3Supported NV_DPCD_MAX_LANE_COUNT read failed
NVRM: _ReadDPCDTps4Supported NV_DPCD14_MAX_DOWNSPREAD read failed
NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
NVRM: | 0x06 | TMDS | 0x00000008 | Yes | 00001000 ( DFP-1 ).
NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000400 ( DFP-2 ).
NVRM: | 0x07 | DisplayPort | 0x00000010 | -- | 00002000 ( DFP-3 ).
NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00004000 ( DFP-4 ).
NVRM: | 0x03 | DisplayPort | 0x00000001 | -- | 00000100 ( DFP-5 ).
NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000200 ( DFP-6 ).
NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00008000 ( DFP-7 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: | Suggested (boot/resume) device(s): 00001000 ( DFP-1 ).
NVRM: | Selecting as primary device: 00001000 ( DFP-1 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
NVRM: inforomGetOCTObject: OCT object load failed, status=0x57
NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074
NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f.
NVRM: Breakpoint on RC Disable Override is disabled
NVRM: PCI-E device status errors pending (00000009):
NVRM: Clearing these errors..
NVRM: PCI-E device AER errors pending (00200000):
NVRM: Clearing these errors..
NVRM: _initThermDefaults: Unable to read VBIOS temperature limits.
NVRM: nvlinkMinionLoad_GV100: NVLink MINION successfully bootstrapped and ready.
NVRM: (MINION RELOADED ON STARTUP) MINION Falcon ucode version info: Ucode v24.0 Phy v171215
NVRM: acrCheckForSuccess_GM200: SEC2_AHESASC binary failed
NVRM: acrPrintLsSigFailingFalcon_GM200: LS Signature check failed for falcon 10
NVRM: acrStateLoad_IMPL: Error locking ACR regions
NVRM: bp @ ../../../../resman/kernel/memsys/nv/objacr.c:413 (reason=75)

ERROR: ** ModsDrvBreakPoint **

-------------------------- END ASSERT INFO DUMP --------------------------
Error 000000000229 : Gpu.Initialize hardware was not initialized
Error 000000000229 : Global.PrintGpuInitError hardware was not initialized
Error 000000000229 : Global.InitializeGpuTests hardware was not initialized

ERROR: ** ModsDrvBreakPoint **

------------------------- BEGIN ASSERT INFO DUMP -------------------------
tpc[6]=0x0 gpctpc[7]=0x0 gpczcull[0]=0x0 gpczcull[1]=0x0 gpczcull[2]=0x0 gpczcull[3]=0x0 gpczcull[4]=0x0 gpczcull[5]=0x0 gpczcull[6]=0x0 gpczcull[7]=0x0
GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline:
GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0
GM10xGpuSubdevice: Floorsweeping parameters present on commandline:
GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0
GM20xGpuSubdevice: Floorsweeping parameters present on commandline:
GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
TU10x floorsweeping parameters present on commandline:
TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0
Unknown init property : FbGddr5x8Mode
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x12
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14
NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB
NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC
NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC
NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57
NVRM: *** Chipset Setup Function Error!
NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains.
NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0
NVRM: -----------------------------------------------------------------------------------
NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
NVRM: -----------------------------------------------------------------------------------
NVRM: _ReadDPCDTps3Supported NV_DPCD_MAX_LANE_COUNT read failed
NVRM: _ReadDPCDTps4Supported NV_DPCD14_MAX_DOWNSPREAD read failed
NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
NVRM: | 0x06 | TMDS | 0x00000008 | Yes | 00001000 ( DFP-1 ).
NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000400 ( DFP-2 ).
NVRM: | 0x07 | DisplayPort | 0x00000010 | -- | 00002000 ( DFP-3 ).
NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00004000 ( DFP-4 ).
NVRM: | 0x03 | DisplayPort | 0x00000001 | -- | 00000100 ( DFP-5 ).
NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000200 ( DFP-6 ).
NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00008000 ( DFP-7 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: | Suggested (boot/resume) device(s): 00001000 ( DFP-1 ).
NVRM: | Selecting as primary device: 00001000 ( DFP-1 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
NVRM: inforomGetOCTObject: OCT object load failed, status=0x57
NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074
NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f.
NVRM: Breakpoint on RC Disable Override is disabled
NVRM: PCI-E device status errors pending (00000009):
NVRM: Clearing these errors..
NVRM: PCI-E device AER errors pending (00200000):
NVRM: Clearing these errors..
NVRM: _initThermDefaults: Unable to read VBIOS temperature limits.
NVRM: nvlinkMinionLoad_GV100: NVLink MINION successfully bootstrapped and ready.
NVRM: (MINION RELOADED ON STARTUP) MINION Falcon ucode version info: Ucode v24.0 Phy v171215
NVRM: acrCheckForSuccess_GM200: SEC2_AHESASC binary failed
NVRM: acrPrintLsSigFailingFalcon_GM200: LS Signature check failed for falcon 10
NVRM: acrStateLoad_IMPL: Error locking ACR regions
NVRM: bp @ ../../../../resman/kernel/memsys/nv/objacr.c:413 (reason=75)

ERROR: ** ModsDrvBreakPoint **
First error recorded: 229 hardware was not initialized
JavaScript stack trace:
#0: Initialize() in <native>:0
#1: InitializeGpuTests() in gputest.jse:309
#2: gputest_main() in gputest.jse:2304
#3: main() in gputest.jse:2247
NVRM: *** Cannot load state into the device
Error 000000000229 : Gpu.Initialize hardware was not initialized
Error 000000000229 : Global.PrintGpuInitError hardware was not initialized
Error 000000000229 : Global.InitializeGpuTests hardware was not initialized
NVRM: x86emu starting CS:EIP: c000:000017d3
Old VESA mode is 00000003 (windowed)
NVRM: Set VBIOS notify (driver will handle hotkeys, etc.).
NVRM: Clear VBIOS notify (VBIOS will handle hotkeys, etc.).
NVRM: x86emu starting CS:EIP: c000:000017d3
Beginning GPU shut down
Shutdown : GPU devices not initialized, skipping GPU nvlink shutdown
NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJHWPM.NVOC: __nvoc_objDelete: Child class OBJSCHED_HW not freed from parent class OBJSCHEDMGR.NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJPERF.NVRM: busFlushVirtualBar2_VBAR2 found unfreed bar2 mapping of offset 0x46b1d0000!
NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:361

ERROR: ** ModsDrvBreakPoint **

-------------------------- END ASSERT INFO DUMP --------------------------

ERROR: ** ModsDrvBreakPoint **

------------------------- BEGIN ASSERT INFO DUMP -------------------------
]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
TU10x floorsweeping parameters present on commandline:
TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0
Unknown init property : FbGddr5x8Mode
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x12
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14
NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB
NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC
NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC
NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57
NVRM: *** Chipset Setup Function Error!
NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains.
NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0
NVRM: -----------------------------------------------------------------------------------
NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
NVRM: -----------------------------------------------------------------------------------
NVRM: _ReadDPCDTps3Supported NV_DPCD_MAX_LANE_COUNT read failed
NVRM: _ReadDPCDTps4Supported NV_DPCD14_MAX_DOWNSPREAD read failed
NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
NVRM: | 0x06 | TMDS | 0x00000008 | Yes | 00001000 ( DFP-1 ).
NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000400 ( DFP-2 ).
NVRM: | 0x07 | DisplayPort | 0x00000010 | -- | 00002000 ( DFP-3 ).
NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00004000 ( DFP-4 ).
NVRM: | 0x03 | DisplayPort | 0x00000001 | -- | 00000100 ( DFP-5 ).
NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000200 ( DFP-6 ).
NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00008000 ( DFP-7 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: | Suggested (boot/resume) device(s): 00001000 ( DFP-1 ).
NVRM: | Selecting as primary device: 00001000 ( DFP-1 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
NVRM: inforomGetOCTObject: OCT object load failed, status=0x57
NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074
NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f.
NVRM: Breakpoint on RC Disable Override is disabled
NVRM: PCI-E device status errors pending (00000009):
NVRM: Clearing these errors..
NVRM: PCI-E device AER errors pending (00200000):
NVRM: Clearing these errors..
NVRM: _initThermDefaults: Unable to read VBIOS temperature limits.
NVRM: nvlinkMinionLoad_GV100: NVLink MINION successfully bootstrapped and ready.
NVRM: (MINION RELOADED ON STARTUP) MINION Falcon ucode version info: Ucode v24.0 Phy v171215
NVRM: acrCheckForSuccess_GM200: SEC2_AHESASC binary failed
NVRM: acrPrintLsSigFailingFalcon_GM200: LS Signature check failed for falcon 10
NVRM: acrStateLoad_IMPL: Error locking ACR regions
NVRM: bp @ ../../../../resman/kernel/memsys/nv/objacr.c:413 (reason=75)

ERROR: ** ModsDrvBreakPoint **
First error recorded: 229 hardware was not initialized
JavaScript stack trace:
#0: Initialize() in <native>:0
#1: InitializeGpuTests() in gputest.jse:309
#2: gputest_main() in gputest.jse:2304
#3: main() in gputest.jse:2247
NVRM: *** Cannot load state into the device
Error 000000000229 : Gpu.Initialize hardware was not initialized
Error 000000000229 : Global.PrintGpuInitError hardware was not initialized
Error 000000000229 : Global.InitializeGpuTests hardware was not initialized
NVRM: x86emu starting CS:EIP: c000:000017d3
Old VESA mode is 00000003 (windowed)
NVRM: Set VBIOS notify (driver will handle hotkeys, etc.).
NVRM: Clear VBIOS notify (VBIOS will handle hotkeys, etc.).
NVRM: x86emu starting CS:EIP: c000:000017d3
Beginning GPU shut down
Shutdown : GPU devices not initialized, skipping GPU nvlink shutdown
NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJHWPM.NVOC: __nvoc_objDelete: Child class OBJSCHED_HW not freed from parent class OBJSCHEDMGR.NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJPERF.NVRM: busFlushVirtualBar2_VBAR2 found unfreed bar2 mapping of offset 0x46b1d0000!
NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:361

ERROR: ** ModsDrvBreakPoint **
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8BF9BC0: offset=0x1fde40000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8C51810: offset=0x1fffa1000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8D11410: offset=0x1fd550000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8CD8EC0: offset=0x1fde2f000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8C52EC0: offset=0x46b440000 type=1
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8CD8CB0: offset=0x1fda00000 type=0
NVRM: busFlushVirtualBar2_VBAR2 found 6 unreleased bar2 mappings
NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:387

ERROR: ** ModsDrvBreakPoint **

-------------------------- END ASSERT INFO DUMP --------------------------

ERROR: ** ModsDrvBreakPoint **

------------------------- BEGIN ASSERT INFO DUMP -------------------------
gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
TU10x floorsweeping parameters present on commandline:
TU10x floorsweeping parameter mask values: nvlink=0x0 nvjpg=0x0
Unknown init property : FbGddr5x8Mode
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x12
fifoConstructEngineList_v02_01: No SW entry found for engine enum 0x14
NVRM: fbInitFbRegionsForFbps_GP102: FB Reserved Memory = 0'00000000 FB Usable Memory = 2'00000000 (8192MB) FB Address Space = 8192MB
NVRM fbEccPreInit_GP100: FECS override applied to FB LTC ECC
NVRM fbEccPreInit_GP100: FECS override applied to FB DRAM ECC
NVRM: inforomBBXLoadObject_IMPL: BBX object get failed, status=0x57
NVRM: *** Chipset Setup Function Error!
NVRM: clkDomainsSanityCheck_SUPER: Almost all programmable domains must be included in the VBIOS clock domains.
NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
NVRM: _devinitGetClockProgrammingTable_35: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
NVRM: inforomGetPPOObject: InfoROM PPO object header load failed, status=0x57
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
NVRM: DevinitGetGcxVdtIndices: Failed to obtain perf table header!
ACPI: Unable to evaluate dev method (_DOD) on 0:1:0.0
NVRM: -----------------------------------------------------------------------------------
NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
NVRM: -----------------------------------------------------------------------------------
NVRM: _ReadDPCDTps3Supported NV_DPCD_MAX_LANE_COUNT read failed
NVRM: _ReadDPCDTps4Supported NV_DPCD14_MAX_DOWNSPREAD read failed
NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
NVRM: | 0x06 | TMDS | 0x00000008 | Yes | 00001000 ( DFP-1 ).
NVRM: | 0x05 | TMDS | 0x00000004 | -- | 00000400 ( DFP-2 ).
NVRM: | 0x07 | DisplayPort | 0x00000010 | -- | 00002000 ( DFP-3 ).
NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00004000 ( DFP-4 ).
NVRM: | 0x03 | DisplayPort | 0x00000001 | -- | 00000100 ( DFP-5 ).
NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000200 ( DFP-6 ).
NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00008000 ( DFP-7 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: | Suggested (boot/resume) device(s): 00001000 ( DFP-1 ).
NVRM: | Selecting as primary device: 00001000 ( DFP-1 ).
NVRM: -----------------------------------------------------------------------------------
NVRM: _gcxInitPmuOverrides: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
NVRM: inforomGetOCTObject: OCT object load failed, status=0x57
NVRM: dispCompleteImpInit_GF100: pGpuHalInfo->ImpCachedValues.perfLimitMaskOverride = 0x00000074
NVRM: dispCompleteImpInit_GF100: reason = 0x0000001f.
NVRM: Breakpoint on RC Disable Override is disabled
NVRM: PCI-E device status errors pending (00000009):
NVRM: Clearing these errors..
NVRM: PCI-E device AER errors pending (00200000):
NVRM: Clearing these errors..
NVRM: _initThermDefaults: Unable to read VBIOS temperature limits.
NVRM: nvlinkMinionLoad_GV100: NVLink MINION successfully bootstrapped and ready.
NVRM: (MINION RELOADED ON STARTUP) MINION Falcon ucode version info: Ucode v24.0 Phy v171215
NVRM: acrCheckForSuccess_GM200: SEC2_AHESASC binary failed
NVRM: acrPrintLsSigFailingFalcon_GM200: LS Signature check failed for falcon 10
NVRM: acrStateLoad_IMPL: Error locking ACR regions
NVRM: bp @ ../../../../resman/kernel/memsys/nv/objacr.c:413 (reason=75)

ERROR: ** ModsDrvBreakPoint **
First error recorded: 229 hardware was not initialized
JavaScript stack trace:
#0: Initialize() in <native>:0
#1: InitializeGpuTests() in gputest.jse:309
#2: gputest_main() in gputest.jse:2304
#3: main() in gputest.jse:2247
NVRM: *** Cannot load state into the device
Error 000000000229 : Gpu.Initialize hardware was not initialized
Error 000000000229 : Global.PrintGpuInitError hardware was not initialized
Error 000000000229 : Global.InitializeGpuTests hardware was not initialized
NVRM: x86emu starting CS:EIP: c000:000017d3
Old VESA mode is 00000003 (windowed)
NVRM: Set VBIOS notify (driver will handle hotkeys, etc.).
NVRM: Clear VBIOS notify (VBIOS will handle hotkeys, etc.).
NVRM: x86emu starting CS:EIP: c000:000017d3
Beginning GPU shut down
Shutdown : GPU devices not initialized, skipping GPU nvlink shutdown
NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJHWPM.NVOC: __nvoc_objDelete: Child class OBJSCHED_HW not freed from parent class OBJSCHEDMGR.NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJPERF.NVRM: busFlushVirtualBar2_VBAR2 found unfreed bar2 mapping of offset 0x46b1d0000!
NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:361

ERROR: ** ModsDrvBreakPoint **
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8BF9BC0: offset=0x1fde40000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8C51810: offset=0x1fffa1000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8D11410: offset=0x1fd550000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8CD8EC0: offset=0x1fde2f000 type=0
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8C52EC0: offset=0x46b440000 type=1
NVRM: busFlushVirtualBar2_VBAR2: unreleased bar2 mapping 8CD8CB0: offset=0x1fda00000 type=0
NVRM: busFlushVirtualBar2_VBAR2 found 6 unreleased bar2 mappings
NVRM: bp @ ../../../../resman/kernel/bus/nv50/vbar2.c:387

ERROR: ** ModsDrvBreakPoint **
NVOC: __nvoc_objDelete: Child class OBJREFCNT not freed from parent class OBJTMR.NVOC: __nvoc_objDelete: Child class OBJHEAP not freed from parent class OBJFB.NVRM: iovaspaceDestruct_IMPL: 9 left-over mappings in IOVAS 0x100
NVRM: bp @ ../../../../resman/arch/nvalloc/common/src/nv/objiovaspace.c:53

ERROR: ** ModsDrvBreakPoint **

-------------------------- END ASSERT INFO DUMP --------------------------
Error 000000000818 : Gpu.ShutDown Mods detected an assertion failure

Error Code = 000000000229 (hardware was not initialized)


####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########


MODS end : Fri Apr 5 22:07:14 2024 [3.563 seconds (00:00:03.563 h:m:s)]

MODS start: Fri Apr 12 02:04:45 2024

Command Line : gputest.js -oqa -test 94

CPU
Arch : x86_64
Name : 12th Gen Intel(R) Core(TM) i3-12100
Cores : 8

Version
MODS : 455.107

System
OperatingSystem: Linux (x86_64)
Kernel : 5.9.1-gentoo-x86_64
KernelDriver : 4.00
SBIOS Version : 1220
SBIOS Date : 08/02/2023
HostName : tinylinux
Available RAM : 15560/15894 MB (Free/Size)
Sys-uuid :
HDD-Serno : 4935130848308216

GPU 0 [01:00.0] dev.sub 0.0
----------------------------------------
DevInst : 0
PCI Location : 0x00, 0x01, 0x00, 0x00
GPU DID : 0x1e81
PDI : 0xdae936078e0895cb
Raw ECID : 0x0080618000000065f3030991
Raw ECID (GHS) : 0x16465f3030800000006030100
ECID : TSMC-PPVC32-06_x6_y4
Device Id : TU104
Revision : a1
Sub Revision : 0
NV Base : 0x92000000
FB Base : 0x80000000
IRQ : 11
WARNING: GPU 0 [01:00.0] PCIE speed capability (8000Mbps) higher than down stream port link speed (2500Mbps)

ERROR: ** ModsDrvBreakPoint **

[ ] ------------------------- BEGIN ASSERT INFO DUMP -------------------------
[ ] GF108PlusGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0
[ ] GM10xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0
[ ] GM20xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
[ ] GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
[ ] TU10x floorsweeping parameters present on commandline:
[ ] TU10x floorsweeping parameter mask values: nvlink=0x0
[ ] Unknown init property : FbGddr5x8Mode
[ ] NVRM: FECS override applied to FB LTC ECC
[ ] NVRM: FECS override applied to FB DRAM ECC
[ ] NVRM: BBX object get failed, status=0x57
[ ] Warning: Can't find Pci device with class code 0x30000, index 1
[ ] Warning: Can't find Pci device with class code 0x30200, index 0
[ ] Warning: Can't find Pci device with class code 0x40300, index 1
[ ] Warning: Can't find Pci device with class code 0x60000, index 1
[ ] Warning: Can't find Pci device with class code 0x60100, index 1
[ ] Warning: Can't find Pci device with class code 0x60200, index 0
[ ] Warning: Can't find Pci device with class code 0x60300, index 0
[ ] Warning: Can't find Pci device with class code 0x60400, index 5
[ ] Warning: Can't find Pci device with class code 0x60401, index 0
[ ] Warning: Can't find Pci device with class code 0x60500, index 0
[ ] Warning: Can't find Pci device with class code 0x60600, index 0
[ ] Warning: Can't find Pci device with class code 0x60700, index 0
[ ] Warning: Can't find Pci device with class code 0x60800, index 0
[ ] Warning: Can't find Pci device with class code 0x60940, index 0
[ ] Warning: Can't find Pci device with class code 0x60980, index 0
[ ] Warning: Can't find Pci device with class code 0x60a00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b01, index 0
[ ] Warning: Can't find Pci device with class code 0x68000, index 0
[ ] NVRM: *** Chipset Setup Function Error!
[ ] NVRM: Almost all programmable domains must be included in the VBIOS clock domains.
[ ] NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
[ ] NVRM: InfoROM PPO object header load failed, status=0x57
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to allocate memroy for boot train cache status is 0x40
[ ] ACPI: Unable to evaluate dev method _DOD, id 0xffffffff on 0000:01:00.0
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: NV_DPCD_MAX_LANE_COUNT read failed
[ ] NVRM: NV_DPCD14_MAX_DOWNSPREAD read failed
[ ] NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
[ ] NVRM: | 0x06 | TMDS | 0x00000008 | -- | 00001000 ( DFP-1 ).
[ ] NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000200 ( DFP-2 ).
[ ] NVRM: | 0x05 | TMDS | 0x00000004 | Yes | 00000400 ( DFP-3 ).
[ ] NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00002000 ( DFP-4 ).
[ ] NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00004000 ( DFP-5 ).
[ ] NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000100 ( DFP-6 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | Suggested (boot/resume) device(s): 00000400 ( DFP-3 ).
[ ] NVRM: | Selecting as primary device: 00000400 ( DFP-3 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: Child aperture crosses parent's boundary, length 2097152 offset 4194304, Parent's length 0
[ ] NVRM: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
[ ] NVRM: OCT object load failed, status=0x57
[ ] NVRM: Breakpoint on RC Disable Override is disabled
[ ] NVRM: PCI-E device status errors pending (00000009):
[ ] NVRM: Clearing these errors..
[ ] NVRM: PCI-E device AER errors pending (00200000):
[ ] NVRM: Clearing these errors..
[ ] NVRM: L1 PM susbstates cant be setup, as CLKREQ# is disabled
[ ] NVRM: Unable to read VBIOS temperature limits.
[ ] NVRM: NVLink MINION successfully bootstrapped and ready.
[ ] NVRM: (MINION RELOADED ON STARTUP) NVRM: MINION Falcon ucode version info: Ucode v26.0 Phy v171215
[ ] NVRM: PMU_NOT_READY: Using Clocks 2.x to read pwrclk clock domain 19.
[ ] NVRM: BBX failed to start recording, status=0x56
[ ] NVRM: InfoROM does not have a valid ECC object!
[ ] NVRM: unable to query current ECC status (0x56)
[ ] NVRM: FB boot train is not supported.
[ ] NVRM: engHwIdMask for PMU-ELCG operations is empty
[ ] NVRM: Unable to cache ECC counts, status: 56
[ ] UnlockHost2Jtag:Start
[ ] WriteHost2Jtag: Writing data of size 2 [ 0x1 0xfffe0000 ] to cluster [ [ "chipletId":0 "instrId":8 ] ] with chain length 33
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] WriteHost2Jtag polled 21 times in 1051 us on PollJtagForNonzero and returned 77.
[ ] Failed to read good Jtag Ctrl Status
[ ] WARNING... Failed to unlock Jtag for access!
[ ] Found GPUs:
[ ] DevInst 0 0000:01:00.0 DevId:1e81 ChipId:164 GpuInst 0 (vga)
[ ] NVRM: ringmaster interrupt GBL_WRITE_ERROR_SYS 0x00000001!
[ ] NVRM: SYS(0) ringstation details : addr=0x0000c800 wrdata=0x80002108 info=0x1a408203 code=0xbadf5108!
[ ] NVRM: SYS(0) ringstation details : subid=0x0000001a priv_level=0x00000000 priv_master=0x00000003!
[ ] NVRM: XVE interrupt received for XUSB/PPC status change
[ ] GpuDevMgr found devices.
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] NVRM: threadId: 0x0000003e8 irql: 0x000000000 flags: 0x020
[ ] NVRM: enterTime: 0x17c56617f61db608 Limits: nonComputeTime: 0x000000000 computeTime: 0x0003d0900
[ ] NVRM: _threadNodeCheckTimeout: Timeout was set to: 4000 msecs!
[ ] NVRM: CHANGE_SEQ_PMU timed out waiting - changeSeqId=0x00000005, clientLockMask=0x00000000.
[ ] NVRM: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ** PMU TIMEOUT ** !!
!! Please file a bug with the following information. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ ] NVRM: <<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - START >>>>>>>>>>>>
[ ] NVRM: Falcon engine: : 0x0000000c
[ ] NVRM: Falcon core revision : 0x0060
[ ] NVRM: Falcon security model : 0x03
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: ========================================
[ ] NVRM: RTOS: ISR Stack size = 256 bytes
[ ] NVRM: RTOS: ISR Stack free = 56 bytes
[ ] NVRM: RTOS: ISR Stack usage = 78 %
[ ] NVRM: RTOS: Most recent task = 0x12 (PERF_DAEMON)
[ ] NVRM: Failed to copy from flcn DMEM. Stack usage is unreliable
[ ] NVRM: ========================================
[ ] NVRM: TASK: Task ID = 0x12 (PERF_DAEMON)
[ ] NVRM: TASK: current EXT Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: current CSB Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: Stack size = 2304 bytes
[ ] NVRM: TASK: Stack free = 0 bytes
[ ] NVRM: TASK: Stack usage = 100 %
[ ] NVRM: TASK: Max Imem Overlay count = 15
[ ] NVRM: TASK: Attached overlays = NVRM: 0x64, NVRM: 0x55, NVRM: 0x6D, NVRM: 0x65, NVRM: 0x6C, NVRM: 0x4B, NVRM: 0x7F, NVRM: 0x40, NVRM: 0x41, NVRM: 0x6A, NVRM: 0x6B, NVRM: 0x62, NVRM: 0x70, NVRM: 0x00, NVRM: 0x00, NVRM:
[ ] NVRM: TASK: Max Dmem Overlay count = 7
[ ] NVRM: TASK: Attached overlays = NVRM: 0x0B, NVRM: 0x24, NVRM: 0x1E, NVRM: 0x26, NVRM: 0x22, NVRM: 0x21, NVRM: 0x00, NVRM:
[ ] NVRM: ========================================
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: PMU_DEBUG(00) : 0xc7635aff
[ ] NVRM: PMU_DEBUG(01) : 0x00be2b30
[ ] NVRM: PMU_DEBUG(02) : 0x0000003e
[ ] NVRM: >> PC=0x000017bc, SP=0x000032e0 (falcon running).
[ ] NVRM: IMB : 0x01fda971
[ ] NVRM: DMB : 0x01fdae5e
[ ] NVRM: CSW : 0x00300001
[ ] NVRM: CTX : 0x00000000
[ ] NVRM: EXCI : 0x00000011
[ ] NVRM: FALCON_RSTAT(0) : 0x10000090
[ ] NVRM: FALCON_RSTAT(1) : 0x1299a0f0
[ ] NVRM: FALCON_RSTAT(2) : 0x78f00010
[ ] NVRM: FALCON_RSTAT(3) : 0x0026003f
[ ] NVRM: FALCON_RSTAT(4) : 0x00000000
[ ] NVRM: FALCON_RSTAT(5) : 0x000000ff
[ ] NVRM: Possible bad register read: addr: 0x10a104, regvalue: 0xbadf510a, error code: Unknown SYS_PRI_ERROR_CODE
[ ] NVRM: OS : 0x01be0d9a
[ ] NVRM: CPUCTL : 0x00000040
[ ] NVRM: IDLESTATE : 0x00000009
[ ] NVRM: MAILBOX0 : 0x00000000
[ ] NVRM: MAILBOX1 : 0x00000000
[ ] NVRM: IRQSTAT : 0x00000001
[ ] NVRM: IRQMODE : 0x0000fc24
[ ] NVRM: IRQMASK : 0x00003871
[ ] NVRM: IRQDEST : 0x00010072
[ ] NVRM: DMACTL : 0x00000001
[ ] NVRM: DMATRFCMD : 0x00000600
[ ] NVRM: DMATRFBASE : 0x01fda000
[ ] NVRM: DMATRFMOFFS : 0x00000000
[ ] NVRM: DMATRFFBOFFS : 0x00121800
[ ] NVRM: BOOTVEC : 0xbadf510a
[ ] NVRM: HWCFG : 0x400e0100
[ ] NVRM: HWCFG1 : 0xea104136
[ ] NVRM: ENGCTL : 0x00000000
[ ] NVRM: CURCTX : 0x401fdf4e
[ ] NVRM: NXTCTX : 0x401fdf4e
[ ] NVRM: EXTERRSTAT : 0x00000000
[ ] NVRM: RSTAT0 : 0x10000090
[ ] NVRM: RSTAT3 : 0x0026003f
[ ] NVRM: EXTERR_INFO : 0x00000000
[ ] NVRM: SCTL : 0x00007021
[ ] NVRM: SCTL1 : 0x0000000f
[ ] NVRM: <<<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - END >>>>>>>>>>>>>
[ ] NVRM: bp @ <fileid:0x00052b>:746
[ ]
[ ] ** ModsDrvBreakPoint **

[ ] -------------------------- END ASSERT INFO DUMP --------------------------

ERROR: ** ModsDrvBreakPoint **

[ ] ------------------------- BEGIN ASSERT INFO DUMP -------------------------
[ ] GF108PlusGpuSubdevice: Floorsweeping parameter mask values: pcie_lane=0x0 fbpa=0x0 spare=0x0
[ ] GM10xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0
[ ] GM20xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
[ ] GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
[ ] TU10x floorsweeping parameters present on commandline:
[ ] TU10x floorsweeping parameter mask values: nvlink=0x0
[ ] Unknown init property : FbGddr5x8Mode
[ ] NVRM: FECS override applied to FB LTC ECC
[ ] NVRM: FECS override applied to FB DRAM ECC
[ ] NVRM: BBX object get failed, status=0x57
[ ] Warning: Can't find Pci device with class code 0x30000, index 1
[ ] Warning: Can't find Pci device with class code 0x30200, index 0
[ ] Warning: Can't find Pci device with class code 0x40300, index 1
[ ] Warning: Can't find Pci device with class code 0x60000, index 1
[ ] Warning: Can't find Pci device with class code 0x60100, index 1
[ ] Warning: Can't find Pci device with class code 0x60200, index 0
[ ] Warning: Can't find Pci device with class code 0x60300, index 0
[ ] Warning: Can't find Pci device with class code 0x60400, index 5
[ ] Warning: Can't find Pci device with class code 0x60401, index 0
[ ] Warning: Can't find Pci device with class code 0x60500, index 0
[ ] Warning: Can't find Pci device with class code 0x60600, index 0
[ ] Warning: Can't find Pci device with class code 0x60700, index 0
[ ] Warning: Can't find Pci device with class code 0x60800, index 0
[ ] Warning: Can't find Pci device with class code 0x60940, index 0
[ ] Warning: Can't find Pci device with class code 0x60980, index 0
[ ] Warning: Can't find Pci device with class code 0x60a00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b01, index 0
[ ] Warning: Can't find Pci device with class code 0x68000, index 0
[ ] NVRM: *** Chipset Setup Function Error!
[ ] NVRM: Almost all programmable domains must be included in the VBIOS clock domains.
[ ] NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
[ ] NVRM: InfoROM PPO object header load failed, status=0x57
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to allocate memroy for boot train cache status is 0x40
[ ] ACPI: Unable to evaluate dev method _DOD, id 0xffffffff on 0000:01:00.0
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: NV_DPCD_MAX_LANE_COUNT read failed
[ ] NVRM: NV_DPCD14_MAX_DOWNSPREAD read failed
[ ] NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
[ ] NVRM: | 0x06 | TMDS | 0x00000008 | -- | 00001000 ( DFP-1 ).
[ ] NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000200 ( DFP-2 ).
[ ] NVRM: | 0x05 | TMDS | 0x00000004 | Yes | 00000400 ( DFP-3 ).
[ ] NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00002000 ( DFP-4 ).
[ ] NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00004000 ( DFP-5 ).
[ ] NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000100 ( DFP-6 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | Suggested (boot/resume) device(s): 00000400 ( DFP-3 ).
[ ] NVRM: | Selecting as primary device: 00000400 ( DFP-3 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: Child aperture crosses parent's boundary, length 2097152 offset 4194304, Parent's length 0
[ ] NVRM: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
[ ] NVRM: OCT object load failed, status=0x57
[ ] NVRM: Breakpoint on RC Disable Override is disabled
[ ] NVRM: PCI-E device status errors pending (00000009):
[ ] NVRM: Clearing these errors..
[ ] NVRM: PCI-E device AER errors pending (00200000):
[ ] NVRM: Clearing these errors..
[ ] NVRM: L1 PM susbstates cant be setup, as CLKREQ# is disabled
[ ] NVRM: Unable to read VBIOS temperature limits.
[ ] NVRM: NVLink MINION successfully bootstrapped and ready.
[ ] NVRM: (MINION RELOADED ON STARTUP) NVRM: MINION Falcon ucode version info: Ucode v26.0 Phy v171215
[ ] NVRM: PMU_NOT_READY: Using Clocks 2.x to read pwrclk clock domain 19.
[ ] NVRM: BBX failed to start recording, status=0x56
[ ] NVRM: InfoROM does not have a valid ECC object!
[ ] NVRM: unable to query current ECC status (0x56)
[ ] NVRM: FB boot train is not supported.
[ ] NVRM: engHwIdMask for PMU-ELCG operations is empty
[ ] NVRM: Unable to cache ECC counts, status: 56
[ ] UnlockHost2Jtag:Start
[ ] WriteHost2Jtag: Writing data of size 2 [ 0x1 0xfffe0000 ] to cluster [ [ "chipletId":0 "instrId":8 ] ] with chain length 33
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] WriteHost2Jtag polled 21 times in 1051 us on PollJtagForNonzero and returned 77.
[ ] Failed to read good Jtag Ctrl Status
[ ] WARNING... Failed to unlock Jtag for access!
[ ] Found GPUs:
[ ] DevInst 0 0000:01:00.0 DevId:1e81 ChipId:164 GpuInst 0 (vga)
[ ] NVRM: ringmaster interrupt GBL_WRITE_ERROR_SYS 0x00000001!
[ ] NVRM: SYS(0) ringstation details : addr=0x0000c800 wrdata=0x80002108 info=0x1a408203 code=0xbadf5108!
[ ] NVRM: SYS(0) ringstation details : subid=0x0000001a priv_level=0x00000000 priv_master=0x00000003!
[ ] NVRM: XVE interrupt received for XUSB/PPC status change
[ ] GpuDevMgr found devices.
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] NVRM: threadId: 0x0000003e8 irql: 0x000000000 flags: 0x020
[ ] NVRM: enterTime: 0x17c56617f61db608 Limits: nonComputeTime: 0x000000000 computeTime: 0x0003d0900
[ ] NVRM: _threadNodeCheckTimeout: Timeout was set to: 4000 msecs!
[ ] NVRM: CHANGE_SEQ_PMU timed out waiting - changeSeqId=0x00000005, clientLockMask=0x00000000.
[ ] NVRM: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ** PMU TIMEOUT ** !!
!! Please file a bug with the following information. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ ] NVRM: <<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - START >>>>>>>>>>>>
[ ] NVRM: Falcon engine: : 0x0000000c
[ ] NVRM: Falcon core revision : 0x0060
[ ] NVRM: Falcon security model : 0x03
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: ========================================
[ ] NVRM: RTOS: ISR Stack size = 256 bytes
[ ] NVRM: RTOS: ISR Stack free = 56 bytes
[ ] NVRM: RTOS: ISR Stack usage = 78 %
[ ] NVRM: RTOS: Most recent task = 0x12 (PERF_DAEMON)
[ ] NVRM: Failed to copy from flcn DMEM. Stack usage is unreliable
[ ] NVRM: ========================================
[ ] NVRM: TASK: Task ID = 0x12 (PERF_DAEMON)
[ ] NVRM: TASK: current EXT Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: current CSB Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: Stack size = 2304 bytes
[ ] NVRM: TASK: Stack free = 0 bytes
[ ] NVRM: TASK: Stack usage = 100 %
[ ] NVRM: TASK: Max Imem Overlay count = 15
[ ] NVRM: TASK: Attached overlays = NVRM: 0x64, NVRM: 0x55, NVRM: 0x6D, NVRM: 0x65, NVRM: 0x6C, NVRM: 0x4B, NVRM: 0x7F, NVRM: 0x40, NVRM: 0x41, NVRM: 0x6A, NVRM: 0x6B, NVRM: 0x62, NVRM: 0x70, NVRM: 0x00, NVRM: 0x00, NVRM:
[ ] NVRM: TASK: Max Dmem Overlay count = 7
[ ] NVRM: TASK: Attached overlays = NVRM: 0x0B, NVRM: 0x24, NVRM: 0x1E, NVRM: 0x26, NVRM: 0x22, NVRM: 0x21, NVRM: 0x00, NVRM:
[ ] NVRM: ========================================
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: PMU_DEBUG(00) : 0xc7635aff
[ ] NVRM: PMU_DEBUG(01) : 0x00be2b30
[ ] NVRM: PMU_DEBUG(02) : 0x0000003e
[ ] NVRM: >> PC=0x000017bc, SP=0x000032e0 (falcon running).
[ ] NVRM: IMB : 0x01fda971
[ ] NVRM: DMB : 0x01fdae5e
[ ] NVRM: CSW : 0x00300001
[ ] NVRM: CTX : 0x00000000
[ ] NVRM: EXCI : 0x00000011
[ ] NVRM: FALCON_RSTAT(0) : 0x10000090
[ ] NVRM: FALCON_RSTAT(1) : 0x1299a0f0
[ ] NVRM: FALCON_RSTAT(2) : 0x78f00010
[ ] NVRM: FALCON_RSTAT(3) : 0x0026003f
[ ] NVRM: FALCON_RSTAT(4) : 0x00000000
[ ] NVRM: FALCON_RSTAT(5) : 0x000000ff
[ ] NVRM: Possible bad register read: addr: 0x10a104, regvalue: 0xbadf510a, error code: Unknown SYS_PRI_ERROR_CODE
[ ] NVRM: OS : 0x01be0d9a
[ ] NVRM: CPUCTL : 0x00000040
[ ] NVRM: IDLESTATE : 0x00000009
[ ] NVRM: MAILBOX0 : 0x00000000
[ ] NVRM: MAILBOX1 : 0x00000000
[ ] NVRM: IRQSTAT : 0x00000001
[ ] NVRM: IRQMODE : 0x0000fc24
[ ] NVRM: IRQMASK : 0x00003871
[ ] NVRM: IRQDEST : 0x00010072
[ ] NVRM: DMACTL : 0x00000001
[ ] NVRM: DMATRFCMD : 0x00000600
[ ] NVRM: DMATRFBASE : 0x01fda000
[ ] NVRM: DMATRFMOFFS : 0x00000000
[ ] NVRM: DMATRFFBOFFS : 0x00121800
[ ] NVRM: BOOTVEC : 0xbadf510a
[ ] NVRM: HWCFG : 0x400e0100
[ ] NVRM: HWCFG1 : 0xea104136
[ ] NVRM: ENGCTL : 0x00000000
[ ] NVRM: CURCTX : 0x401fdf4e
[ ] NVRM: NXTCTX : 0x401fdf4e
[ ] NVRM: EXTERRSTAT : 0x00000000
[ ] NVRM: RSTAT0 : 0x10000090
[ ] NVRM: RSTAT3 : 0x0026003f
[ ] NVRM: EXTERR_INFO : 0x00000000
[ ] NVRM: SCTL : 0x00007021
[ ] NVRM: SCTL1 : 0x0000000f
[ ] NVRM: <<<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - END >>>>>>>>>>>>>
[ ] NVRM: bp @ <fileid:0x00052b>:746
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] First error recorded: 818 Mods detected an assertion failure
[ ] JavaScript stack trace:
[ ] #0: Initialize() in <native>:0
[ ] #1: InitializeGpuTests() in gputest.jse:341
[ ] #2: gputest_main() in gputest.jse:2199
[ ] #3: main() in gputest.jse:2136
[ ] NVRM: Error in change sequencer: status = 0x00000065, clientLockMask=0x00000000.
[ ] NVRM: bp @ <fileid:0x00053b>:1153
[ ]
[ ] ** ModsDrvBreakPoint **

[ ] -------------------------- END ASSERT INFO DUMP --------------------------

ERROR: ** ModsDrvBreakPoint **

[ ] ------------------------- BEGIN ASSERT INFO DUMP -------------------------
[ ] GM10xGpuSubdevice: Floorsweeping parameter mask values: nvenc=0x0 nvdec=0x0 head=0x0
[ ] GM20xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GM20xGpuSubdevice: Floorsweeping parameters mask values: fbp_rop_l2[0]=0x0 fbp_rop_l2[1]=0x0 fbp_rop_l2[2]=0x0 fbp_rop_l2[3]=0x0 fbp_rop_l2[4]=0x0 fbp_rop_l2[5]=0x0 fbp_rop_l2[6]=0x0 fbp_rop_l2[7]=0x0 fbp_rop_l2[8]=0x0 fbp_rop_l2[9]=0x0 fbp_rop_l2[10]=0x0 fbp_rop_l2[11]=0x0 fbp_rop_l2[12]=0x0 fbp_rop_l2[13]=0x0 fbp_rop_l2[14]=0x0 fbp_rop_l2[15]=0x0
[ ] GP10xGpuSubdevice: Floorsweeping parameters present on commandline:
[ ] GP10xGpuSubdevice: Floorsweeping parameters mask values: gpc_pes[0]=0x0 gpc_pes[1]=0x0 gpc_pes[2]=0x0 gpc_pes[3]=0x0 gpc_pes[4]=0x0 gpc_pes[5]=0x0 gpc_pes[6]=0x0 gpc_pes[7]=0x0 gpc_pes[8]=0x0 gpc_pes[9]=0x0 gpc_pes[10]=0x0 gpc_pes[11]=0x0 gpc_pes[12]=0x0 gpc_pes[13]=0x0 gpc_pes[14]=0x0 gpc_pes[15]=0x0
[ ] TU10x floorsweeping parameters present on commandline:
[ ] TU10x floorsweeping parameter mask values: nvlink=0x0
[ ] Unknown init property : FbGddr5x8Mode
[ ] NVRM: FECS override applied to FB LTC ECC
[ ] NVRM: FECS override applied to FB DRAM ECC
[ ] NVRM: BBX object get failed, status=0x57
[ ] Warning: Can't find Pci device with class code 0x30000, index 1
[ ] Warning: Can't find Pci device with class code 0x30200, index 0
[ ] Warning: Can't find Pci device with class code 0x40300, index 1
[ ] Warning: Can't find Pci device with class code 0x60000, index 1
[ ] Warning: Can't find Pci device with class code 0x60100, index 1
[ ] Warning: Can't find Pci device with class code 0x60200, index 0
[ ] Warning: Can't find Pci device with class code 0x60300, index 0
[ ] Warning: Can't find Pci device with class code 0x60400, index 5
[ ] Warning: Can't find Pci device with class code 0x60401, index 0
[ ] Warning: Can't find Pci device with class code 0x60500, index 0
[ ] Warning: Can't find Pci device with class code 0x60600, index 0
[ ] Warning: Can't find Pci device with class code 0x60700, index 0
[ ] Warning: Can't find Pci device with class code 0x60800, index 0
[ ] Warning: Can't find Pci device with class code 0x60940, index 0
[ ] Warning: Can't find Pci device with class code 0x60980, index 0
[ ] Warning: Can't find Pci device with class code 0x60a00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b00, index 0
[ ] Warning: Can't find Pci device with class code 0x60b01, index 0
[ ] Warning: Can't find Pci device with class code 0x68000, index 0
[ ] NVRM: *** Chipset Setup Function Error!
[ ] NVRM: Almost all programmable domains must be included in the VBIOS clock domains.
[ ] NVRM: VBIOS clock domains: 0x041800fe Programmable domains: 0x07d800fe Bad domains: 0x03c00000
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: All secondary VF curve entries are invalid but the secondary curve count is NOT adjusted. vfeIdx = 255, dvcoOffsetVfeIdx = 255
[ ] NVRM: Invalid secondary VFE values observed in POR. POR Secondary curve count = 1, Valid VFE values got for curve = 0
[ ] NVRM: InfoROM PPO object header load failed, status=0x57
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Failed to obtain perf table header!
[ ] NVRM: Using Clocks 2.x to read read-only utilsclk clock domain 18.
[ ] NVRM: Failed to allocate memroy for boot train cache status is 0x40
[ ] ACPI: Unable to evaluate dev method _DOD, id 0xffffffff on 0000:01:00.0
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | DDC port | Display Type | Pad Mask | Connected? | Display Mask (name)
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: NV_DPCD_MAX_LANE_COUNT read failed
[ ] NVRM: NV_DPCD14_MAX_DOWNSPREAD read failed
[ ] NVRM: | 0x06 | DisplayPort | 0x00000008 | -- | 00000800 ( DFP-0 ).
[ ] NVRM: | 0x06 | TMDS | 0x00000008 | -- | 00001000 ( DFP-1 ).
[ ] NVRM: | 0x05 | DisplayPort | 0x00000004 | -- | 00000200 ( DFP-2 ).
[ ] NVRM: | 0x05 | TMDS | 0x00000004 | Yes | 00000400 ( DFP-3 ).
[ ] NVRM: | 0x07 | TMDS | 0x00000010 | -- | 00002000 ( DFP-4 ).
[ ] NVRM: | 0x08 | DisplayPort | 0x00000020 | -- | 00004000 ( DFP-5 ).
[ ] NVRM: | 0x03 | TMDS | 0x00000001 | -- | 00000100 ( DFP-6 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: | Suggested (boot/resume) device(s): 00000400 ( DFP-3 ).
[ ] NVRM: | Selecting as primary device: 00000400 ( DFP-3 ).
[ ] NVRM: -----------------------------------------------------------------------------------
[ ] NVRM: Child aperture crosses parent's boundary, length 2097152 offset 4194304, Parent's length 0
[ ] NVRM: Invalid DI volt settle time in VBIOS. Disabling DI VOLTAGE_UPDATE.
[ ] NVRM: OCT object load failed, status=0x57
[ ] NVRM: Breakpoint on RC Disable Override is disabled
[ ] NVRM: PCI-E device status errors pending (00000009):
[ ] NVRM: Clearing these errors..
[ ] NVRM: PCI-E device AER errors pending (00200000):
[ ] NVRM: Clearing these errors..
[ ] NVRM: L1 PM susbstates cant be setup, as CLKREQ# is disabled
[ ] NVRM: Unable to read VBIOS temperature limits.
[ ] NVRM: NVLink MINION successfully bootstrapped and ready.
[ ] NVRM: (MINION RELOADED ON STARTUP) NVRM: MINION Falcon ucode version info: Ucode v26.0 Phy v171215
[ ] NVRM: PMU_NOT_READY: Using Clocks 2.x to read pwrclk clock domain 19.
[ ] NVRM: BBX failed to start recording, status=0x56
[ ] NVRM: InfoROM does not have a valid ECC object!
[ ] NVRM: unable to query current ECC status (0x56)
[ ] NVRM: FB boot train is not supported.
[ ] NVRM: engHwIdMask for PMU-ELCG operations is empty
[ ] NVRM: Unable to cache ECC counts, status: 56
[ ] UnlockHost2Jtag:Start
[ ] WriteHost2Jtag: Writing data of size 2 [ 0x1 0xfffe0000 ] to cluster [ [ "chipletId":0 "instrId":8 ] ] with chain length 33
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] WriteHost2Jtag polled 21 times in 1051 us on PollJtagForNonzero and returned 77.
[ ] Failed to read good Jtag Ctrl Status
[ ] WARNING... Failed to unlock Jtag for access!
[ ] Found GPUs:
[ ] DevInst 0 0000:01:00.0 DevId:1e81 ChipId:164 GpuInst 0 (vga)
[ ] NVRM: ringmaster interrupt GBL_WRITE_ERROR_SYS 0x00000001!
[ ] NVRM: SYS(0) ringstation details : addr=0x0000c800 wrdata=0x80002108 info=0x1a408203 code=0xbadf5108!
[ ] NVRM: SYS(0) ringstation details : subid=0x0000001a priv_level=0x00000000 priv_master=0x00000003!
[ ] NVRM: XVE interrupt received for XUSB/PPC status change
[ ] GpuDevMgr found devices.
[ ] Warning: MSI for device 0000:01:00.0 not serviced
[ ] NVRM: threadId: 0x0000003e8 irql: 0x000000000 flags: 0x020
[ ] NVRM: enterTime: 0x17c56617f61db608 Limits: nonComputeTime: 0x000000000 computeTime: 0x0003d0900
[ ] NVRM: _threadNodeCheckTimeout: Timeout was set to: 4000 msecs!
[ ] NVRM: CHANGE_SEQ_PMU timed out waiting - changeSeqId=0x00000005, clientLockMask=0x00000000.
[ ] NVRM: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ** PMU TIMEOUT ** !!
!! Please file a bug with the following information. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ ] NVRM: <<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - START >>>>>>>>>>>>
[ ] NVRM: Falcon engine: : 0x0000000c
[ ] NVRM: Falcon core revision : 0x0060
[ ] NVRM: Falcon security model : 0x03
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: ========================================
[ ] NVRM: RTOS: ISR Stack size = 256 bytes
[ ] NVRM: RTOS: ISR Stack free = 56 bytes
[ ] NVRM: RTOS: ISR Stack usage = 78 %
[ ] NVRM: RTOS: Most recent task = 0x12 (PERF_DAEMON)
[ ] NVRM: Failed to copy from flcn DMEM. Stack usage is unreliable
[ ] NVRM: ========================================
[ ] NVRM: TASK: Task ID = 0x12 (PERF_DAEMON)
[ ] NVRM: TASK: current EXT Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: current CSB Privilege Level = 0x02 (LS)
[ ] NVRM: TASK: Stack size = 2304 bytes
[ ] NVRM: TASK: Stack free = 0 bytes
[ ] NVRM: TASK: Stack usage = 100 %
[ ] NVRM: TASK: Max Imem Overlay count = 15
[ ] NVRM: TASK: Attached overlays = NVRM: 0x64, NVRM: 0x55, NVRM: 0x6D, NVRM: 0x65, NVRM: 0x6C, NVRM: 0x4B, NVRM: 0x7F, NVRM: 0x40, NVRM: 0x41, NVRM: 0x6A, NVRM: 0x6B, NVRM: 0x62, NVRM: 0x70, NVRM: 0x00, NVRM: 0x00, NVRM:
[ ] NVRM: TASK: Max Dmem Overlay count = 7
[ ] NVRM: TASK: Attached overlays = NVRM: 0x0B, NVRM: 0x24, NVRM: 0x1E, NVRM: 0x26, NVRM: 0x22, NVRM: 0x21, NVRM: 0x00, NVRM:
[ ] NVRM: ========================================
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: PMU_DEBUG(00) : 0xc7635aff
[ ] NVRM: PMU_DEBUG(01) : 0x00be2b30
[ ] NVRM: PMU_DEBUG(02) : 0x0000003e
[ ] NVRM: >> PC=0x000017bc, SP=0x000032e0 (falcon running).
[ ] NVRM: IMB : 0x01fda971
[ ] NVRM: DMB : 0x01fdae5e
[ ] NVRM: CSW : 0x00300001
[ ] NVRM: CTX : 0x00000000
[ ] NVRM: EXCI : 0x00000011
[ ] NVRM: FALCON_RSTAT(0) : 0x10000090
[ ] NVRM: FALCON_RSTAT(1) : 0x1299a0f0
[ ] NVRM: FALCON_RSTAT(2) : 0x78f00010
[ ] NVRM: FALCON_RSTAT(3) : 0x0026003f
[ ] NVRM: FALCON_RSTAT(4) : 0x00000000
[ ] NVRM: FALCON_RSTAT(5) : 0x000000ff
[ ] NVRM: Possible bad register read: addr: 0x10a104, regvalue: 0xbadf510a, error code: Unknown SYS_PRI_ERROR_CODE
[ ] NVRM: OS : 0x01be0d9a
[ ] NVRM: CPUCTL : 0x00000040
[ ] NVRM: IDLESTATE : 0x00000009
[ ] NVRM: MAILBOX0 : 0x00000000
[ ] NVRM: MAILBOX1 : 0x00000000
[ ] NVRM: IRQSTAT : 0x00000001
[ ] NVRM: IRQMODE : 0x0000fc24
[ ] NVRM: IRQMASK : 0x00003871
[ ] NVRM: IRQDEST : 0x00010072
[ ] NVRM: DMACTL : 0x00000001
[ ] NVRM: DMATRFCMD : 0x00000600
[ ] NVRM: DMATRFBASE : 0x01fda000
[ ] NVRM: DMATRFMOFFS : 0x00000000
[ ] NVRM: DMATRFFBOFFS : 0x00121800
[ ] NVRM: BOOTVEC : 0xbadf510a
[ ] NVRM: HWCFG : 0x400e0100
[ ] NVRM: HWCFG1 : 0xea104136
[ ] NVRM: ENGCTL : 0x00000000
[ ] NVRM: CURCTX : 0x401fdf4e
[ ] NVRM: NXTCTX : 0x401fdf4e
[ ] NVRM: EXTERRSTAT : 0x00000000
[ ] NVRM: RSTAT0 : 0x10000090
[ ] NVRM: RSTAT3 : 0x0026003f
[ ] NVRM: EXTERR_INFO : 0x00000000
[ ] NVRM: SCTL : 0x00007021
[ ] NVRM: SCTL1 : 0x0000000f
[ ] NVRM: <<<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - END >>>>>>>>>>>>>
[ ] NVRM: bp @ <fileid:0x00052b>:746
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] First error recorded: 818 Mods detected an assertion failure
[ ] JavaScript stack trace:
[ ] #0: Initialize() in <native>:0
[ ] #1: InitializeGpuTests() in gputest.jse:341
[ ] #2: gputest_main() in gputest.jse:2199
[ ] #3: main() in gputest.jse:2136
[ ] NVRM: Error in change sequencer: status = 0x00000065, clientLockMask=0x00000000.
[ ] NVRM: bp @ <fileid:0x00053b>:1153
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] NVRM: PERF_LIMITS::arbitrateAndAppy() returned error: status=0x00000065.
[ ] NVRM: bp @ <fileid:0x00053a>:521
[ ]
[ ] ** ModsDrvBreakPoint **

[ ] -------------------------- END ASSERT INFO DUMP --------------------------

ERROR: ** ModsDrvBreakPoint on GPU 0 [01:00.0] **

[ 0] ------------------------- BEGIN ASSERT INFO DUMP -------------------------
[ ] NVRM: TASK: Attached overlays = NVRM: 0x0B, NVRM: 0x24, NVRM: 0x1E, NVRM: 0x26, NVRM: 0x22, NVRM: 0x21, NVRM: 0x00, NVRM:
[ ] NVRM: ========================================
[ ] NVRM:
<<<<<<<<<<<<< EXPERIMENTAL >>>>>>>>>>>>>

[ ] NVRM: PMU_DEBUG(00) : 0xc7635aff
[ ] NVRM: PMU_DEBUG(01) : 0x00be2b30
[ ] NVRM: PMU_DEBUG(02) : 0x0000003e
[ ] NVRM: >> PC=0x000017bc, SP=0x000032e0 (falcon running).
[ ] NVRM: IMB : 0x01fda971
[ ] NVRM: DMB : 0x01fdae5e
[ ] NVRM: CSW : 0x00300001
[ ] NVRM: CTX : 0x00000000
[ ] NVRM: EXCI : 0x00000011
[ ] NVRM: FALCON_RSTAT(0) : 0x10000090
[ ] NVRM: FALCON_RSTAT(1) : 0x1299a0f0
[ ] NVRM: FALCON_RSTAT(2) : 0x78f00010
[ ] NVRM: FALCON_RSTAT(3) : 0x0026003f
[ ] NVRM: FALCON_RSTAT(4) : 0x00000000
[ ] NVRM: FALCON_RSTAT(5) : 0x000000ff
[ ] NVRM: Possible bad register read: addr: 0x10a104, regvalue: 0xbadf510a, error code: Unknown SYS_PRI_ERROR_CODE
[ ] NVRM: OS : 0x01be0d9a
[ ] NVRM: CPUCTL : 0x00000040
[ ] NVRM: IDLESTATE : 0x00000009
[ ] NVRM: MAILBOX0 : 0x00000000
[ ] NVRM: MAILBOX1 : 0x00000000
[ ] NVRM: IRQSTAT : 0x00000001
[ ] NVRM: IRQMODE : 0x0000fc24
[ ] NVRM: IRQMASK : 0x00003871
[ ] NVRM: IRQDEST : 0x00010072
[ ] NVRM: DMACTL : 0x00000001
[ ] NVRM: DMATRFCMD : 0x00000600
[ ] NVRM: DMATRFBASE : 0x01fda000
[ ] NVRM: DMATRFMOFFS : 0x00000000
[ ] NVRM: DMATRFFBOFFS : 0x00121800
[ ] NVRM: BOOTVEC : 0xbadf510a
[ ] NVRM: HWCFG : 0x400e0100
[ ] NVRM: HWCFG1 : 0xea104136
[ ] NVRM: ENGCTL : 0x00000000
[ ] NVRM: CURCTX : 0x401fdf4e
[ ] NVRM: NXTCTX : 0x401fdf4e
[ ] NVRM: EXTERRSTAT : 0x00000000
[ ] NVRM: RSTAT0 : 0x10000090
[ ] NVRM: RSTAT3 : 0x0026003f
[ ] NVRM: EXTERR_INFO : 0x00000000
[ ] NVRM: SCTL : 0x00007021
[ ] NVRM: SCTL1 : 0x0000000f
[ ] NVRM: <<<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - END >>>>>>>>>>>>>
[ ] NVRM: bp @ <fileid:0x00052b>:746
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] First error recorded: 818 Mods detected an assertion failure
[ ] JavaScript stack trace:
[ ] #0: Initialize() in <native>:0
[ ] #1: InitializeGpuTests() in gputest.jse:341
[ ] #2: gputest_main() in gputest.jse:2199
[ ] #3: main() in gputest.jse:2136
[ ] NVRM: Error in change sequencer: status = 0x00000065, clientLockMask=0x00000000.
[ ] NVRM: bp @ <fileid:0x00053b>:1153
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] NVRM: PERF_LIMITS::arbitrateAndAppy() returned error: status=0x00000065.
[ ] NVRM: bp @ <fileid:0x00053a>:521
[ ]
[ ] ** ModsDrvBreakPoint **
[ ] NVRM:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ** FB Falcon HALTED ** !!
!! Please file a bug with the following information. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ ] NVRM: <<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - START >>>>>>>>>>>>
[ ] NVRM: Falcon engine: : 0x00000018
[ ] NVRM: Falcon core revision : 0x0060
[ ] NVRM: Falcon security model : 0x02
[ ] NVRM: FALCON IMEM BLK MAPPING (PA->VA) (256 TOTAL):
[ ] NVRM: 0x00: 0x01000000 0x01000100 0x01000200 0x01000300 0x01000400 0x01000500 0x01000600 0x01000700
[ ] NVRM: 0x08: 0x01000800 0x01000900 0x01000a00 0x01000b00 0x01000c00 0x01000d00 0x01000e00 0x01000f00
[ ] NVRM: 0x10: 0x01001000 0x01001100 0x01001200 0x01001300 0x01001400 0x01001500 0x01001600 0x01001700
[ ] NVRM: 0x18: 0x01001800 0x01001900 0x01001a00 0x01001b00 0x01001c00 0x01001d00 0x01001e00 0x01001f00
[ ] NVRM: 0x20: 0x01002000 0x01002100 0x01002200 0x01002300 0x01002400 0x01002500 0x01002600 0x01002700
[ ] NVRM: 0x28: 0x01002800 0x01002900 0x01002a00 0x01002b00 0x01002c00 0x01002d00 0x01002e00 0x01002f00
[ ] NVRM: 0x30: 0x01003000 0x01003100 0x01003200 0x01003300 0x01003400 0x01003500 0x01003600 0x01003700
[ ] NVRM: 0x38: 0x01003800 0x01003900 0x01003a00 0x01003b00 0x01003c00 0x01003d00 0x01003e00 0x01003f00
[ ] NVRM: 0x40: 0x01004000 0x01004100 0x01004200 0x01004300 0x01004400 0x01004500 0x01004600 0x01004700
[ ] NVRM: 0x48: 0x01004800 0x01004900 0x01004a00 0x01004b00 0x01004c00 0x01004d00 0x01004e00 0x01004f00
[ ] NVRM: 0x50: 0x01005000 0x01005100 0x01005200 0x01005300 0x01005400 0x01005500 0x01005600 0x01005700
[ ] NVRM: 0x58: 0x01005800 0x01005900 0x01005a00 0x01005b00 0x01005c00 0x01005d00 0x01005e00 0x01005f00
[ ] NVRM: 0x60: 0x01006000 0x01006100 0x01006200 0x01006300 0x01006400 0x01006500 0x01006600 0x01006700
[ ] NVRM: 0x68: 0x01006800 0x01006900 0x01006a00 0x01006b00 0x01006c00 0x01006d00 0x01006e00 0x01006f00
[ ] NVRM: 0x70: 0x01007000 0x01007100 0x01007200 0x01007300 0x01007400 0x01007500 0x01007600 0x01007700
[ ] NVRM: 0x78: 0x01007800 0x01007900 0x01007a00 0x01007b00 0x01007c00 0x01007d00 0x01007e00 0x01007f00
[ ] NVRM: 0x80: 0x01008000 0x01008100 0x01008200 0x01008300 0x01008400 0x01008500 0x01008600 0x01008700
[ ] NVRM: 0x88: 0x01008800 0x01008900 0x01008a00 0x01008b00 0x01008c00 0x01008d00 0x01008e00 0x01008f00
[ ] NVRM: 0x90: 0x01009000 0x01009100 0x01009200 0x01009300 0x01009400 0x01009500 0x01009600 0x01009700
[ ] NVRM: 0x98: 0x01009800 0x01009900 0x01009a00 0x01009b00 0x01009c00 0x01009d00 0x01009e00 0x01009f00
[ ] NVRM: 0xa0: 0x0100a000 0x0100a100 0x0100a200 0x0100a300 0x0100a400 0x0100a500 0x0100a600 0x0100a700
[ ] NVRM: 0xa8: 0x0100a800 0x0100a900 0x0100aa00 0x0100ab00 0x0100ac00 0x0100ad00 0x0100ae00 0x0100af00
[ ] NVRM: 0xb0: 0x0100b000 0x0100b100 0x0100b200 0x0100b300 0x0100b400 0x0100b500 0x0100b600 0x0100b700
[ ] NVRM: 0xb8: 0x0100b800 0x0100b900 0x0100ba00 0x0100bb00 0x0100bc00 0x0100bd00 0x0100be00 0x0100bf00
[ ] NVRM: 0xc0: 0x0100c000 0x0100c100 0x0100c200 0x0100c300 0x0100c400 0x0100c500 0x0100c600 0x0100c700
[ ] NVRM: 0xc8: 0x0100c800 0x0100c900 0x0100ca00 0x0100cb00 0x0100cc00 0x0100cd00 0x0100ce00 0x0100cf00
[ ] NVRM: 0xd0: 0x0100d000 0x0100d100 0x0100d200 0x0100d300 0x0100d400 0x0100d500 0x0100d600 0x00000000
[ ] NVRM: 0xd8: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
[ ] NVRM: 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
[ ] NVRM: 0xe8: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
[ ] NVRM: 0xf0: 0x0100fe00 0x0100ff00 0x01010000 0x01010100 0x01010200 0x01010300 0x01010400 0x01010500
[ ] NVRM: 0xf8: 0x01010600 0x01010700 0x01010800 0x01010900 0x01010a00 0x01010b00 0x01010c00 0x01010d00
[ ] NVRM: FBFALCON_MAILBOX(00) : 0x00000001
[ ] NVRM: FBFALCON_MAILBOX(01) : 0x00000060
[ ] NVRM: FBFALCON_MAILBOX(02) : 0x01000001
[ ] NVRM: FBFALCON_MAILBOX(03) : 0x02000000
[ ] NVRM: FBFALCON_MAILBOX(04) : 0x12120000
[ ] NVRM: FBFALCON_MAILBOX(05) : 0x00000007
[ ] NVRM: FBFALCON_MAILBOX(06) : 0x00000001
[ ] NVRM: FBFALCON_MAILBOX(07) : 0xffffffff
[ ] NVRM: FBFALCON_MAILBOX(08) : 0xffffffff
[ ] NVRM: FBFALCON_MAILBOX(09) : 0x00000100
[ ] NVRM: FBFALCON_MAILBOX(10) : 0x00000000
[ ] NVRM: FBFALCON_MAILBOX(11) : 0x00000000
[ ] NVRM: FBFALCON_MAILBOX(12) : 0x30055e77
[ ] NVRM: FBFALCON_MAILBOX(13) : 0x30055e77
[ ] NVRM: FBFALCON_MAILBOX(14) : 0x0000720c
[ ] NVRM: FBFALCON_MAILBOX(15) : 0x0000e090
[ ] NVRM: PC TRACE (TOTAL 31 ENTRIES. Entry 0 is the most recent branch):
[ ] NVRM: FALCON_TRACEPC(0) : 0x0000a423
[ ] NVRM: FALCON_TRACEPC(1) : 0x0000a41c
[ ] NVRM: FALCON_TRACEPC(2) : 0x0000a3fe
[ ] NVRM: FALCON_TRACEPC(3) : 0x000092b7
[ ] NVRM: FALCON_TRACEPC(4) : 0x000092b0
[ ] NVRM: FALCON_TRACEPC(5) : 0x0000090e
[ ] NVRM: FALCON_TRACEPC(6) : 0x00000907
[ ] NVRM: FALCON_TRACEPC(7) : 0x00000886
[ ] NVRM: FALCON_TRACEPC(8) : 0x0000929a
[ ] NVRM: FALCON_TRACEPC(9) : 0x0000080c
[ ] NVRM: FALCON_TRACEPC(10) : 0x00000802
[ ] NVRM: FALCON_TRACEPC(11) : 0x00000791
[ ] NVRM: FALCON_TRACEPC(12) : 0x00009291
[ ] NVRM: FALCON_TRACEPC(13) : 0x0000a3f8
[ ] NVRM: FALCON_TRACEPC(14) : 0x0000090e
[ ] NVRM: FALCON_TRACEPC(15) : 0x00000907
[ ] NVRM: FALCON_TRACEPC(16) : 0x00000886
[ ] NVRM: FALCON_TRACEPC(17) : 0x0000a3f4
[ ] NVRM: FALCON_TRACEPC(18) : 0x00000869
[ ] NVRM: FALCON_TRACEPC(19) : 0x0000085f
[ ] NVRM: FALCON_TRACEPC(20) : 0x00000822
[ ] NVRM: FALCON_TRACEPC(21) : 0x0000a3de
[ ] NVRM: FALCON_TRACEPC(22) : 0x00009932
[ ] NVRM: FALCON_TRACEPC(23) : 0x0000992b
[ ] NVRM: FALCON_TRACEPC(24) : 0x0000090e
[ ] NVRM: FALCON_TRACEPC(25) : 0x00000907
[ ] NVRM: FALCON_TRACEPC(26) : 0x00000886
[ ] NVRM: FALCON_TRACEPC(27) : 0x00009912
[ ] NVRM: FALCON_TRACEPC(28) : 0x00000869
[ ] NVRM: FALCON_TRACEPC(29) : 0x0000085f
[ ] NVRM: FALCON_TRACEPC(30) : 0x00000822
[ ] NVRM: >> PC=0x00007223, SP=0x0000fe8c (falcon halted).
[ ] NVRM: IMB : 0x01fda020
[ ] NVRM: DMB : 0x01fdb630
[ ] NVRM: CSW : 0x00000000
[ ] NVRM: CTX : 0x00000300
[ ] NVRM: EXCI : 0x00000000
[ ] NVRM: FALCON_RSTAT(0) : 0x40000000
[ ] NVRM: FALCON_RSTAT(1) : 0x0090aaf0
[ ] NVRM: FALCON_RSTAT(2) : 0x00000010
[ ] NVRM: FALCON_RSTAT(3) : 0x008e003f
[ ] NVRM: FALCON_RSTAT(4) : 0x00000000
[ ] NVRM: FALCON_RSTAT(5) : 0x000000ff
[ ] NVRM: Possible bad register read: addr: 0x9a4104, regvalue: 0xbadf510a, error code: Unknown SYS_PRI_ERROR_CODE
[ ] NVRM: OS : 0x01bac271
[ ] NVRM: CPUCTL : 0x00000050
[ ] NVRM: IDLESTATE : 0x00000000
[ ] NVRM: MAILBOX0 : 0x00000001
[ ] NVRM: MAILBOX1 : 0x00000000
[ ] NVRM: IRQSTAT : 0x00001010
[ ] NVRM: IRQMODE : 0x0001f70f
[ ] NVRM: IRQMASK : 0x0001ffdf
[ ] NVRM: IRQDEST : 0x000000f0
[ ] NVRM: DMACTL : 0x00000000
[ ] NVRM: DMATRFCMD : 0x00000602
[ ] NVRM: DMATRFBASE : 0x01fda000
[ ] NVRM: DMATRFMOFFS : 0x00000000
[ ] NVRM: DMATRFFBOFFS : 0x00020000
[ ] NVRM: BOOTVEC : 0xbadf510a
[ ] NVRM: HWCFG : 0x400e0100
[ ] NVRM: HWCFG1 : 0xf0104126
[ ] NVRM: ENGCTL : 0x00000000
[ ] NVRM: CURCTX : 0x00000000
[ ] NVRM: NXTCTX : 0x00000000
[ ] NVRM: EXTERRSTAT : 0x00000000
[ ] NVRM: RSTAT0 : 0x40000000
[ ] NVRM: RSTAT3 : 0x008e003f
[ ] NVRM: EXTERR_INFO : 0x00000000
[ ] NVRM: SCTL : 0x00007021
[ ] NVRM: SCTL1 : 0x0000000f
[ ] NVRM: <<<<<<<<<<<<< FALCON DEBUG INFO GPU 0 - END >>>>>>>>>>>>>
[ ] NVRM: bp @ <fileid:0x000320>:636 (reason=113)
[ ]
[ ] ** ModsDrvBreakPoint on GPU 0 [01:00.0] **

[ 0] -------------------------- END ASSERT INFO DUMP --------------------------
NVRM has encountered an unrecoverable error. Exiting MODS.
Error 000000000540 : Global.IsTestModeCompute NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : GPU 0 [01:00.0] NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]

Error 000000000540 : Global.JsonLogNvSwitches NVRM Fatal error: encountered unrecoverable HW state [0.002 seconds]
Error 000000000540 : Out.Flush NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : Global.PrintNvSwitchInfo NVRM Fatal error: encountered unrecoverable HW state [0.243 seconds]
Error 000000000540 : Global.RunFuncOnlyOnce NVRM Fatal error: encountered unrecoverable HW state [0.252 seconds]
Error 000000000540 : Global.VerifyErrorCode NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]

Error Code = 000000000818 (Mods detected an assertion failure)


####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########


Error 000000000540 : Global.PrintErrors NVRM Fatal error: encountered unrecoverable HW state [0.006 seconds]
Error 000000000540 : Global.PrintVbiosStatus NVRM Fatal error: encountered unrecoverable HW state [0.000 seconds]
Error 000000000540 : Global.PrintGpuTestErrors NVRM Fatal error: encountered unrecoverable HW state [0.062 seconds]
RmDestroyGpu failed
1