DV2000 (KAI) Not respond to power key

R EZ A

hi guys

board use 0.02A

3D3V_PWR=3.3V
5V_PWR=0V
PWR_S5_EN=0V

KBC_PWR_BTN#=3.3V

how i can find that kbc work or not??
what other voltage i should Measure??

tnx all

and555

please measure SB_PWR_BTN#, when power button pressed, SB_PWR_BTN# will be low for a moment.
if there is no respon, it can be caused by:

LID_CLOSE# : low
or
AC_IN# : high
or
etc...

LID_CLOSE# and AC_IN# are the most common problem that I found.

btw, I use the signal name above from PAMIRS platform,.

Правила форума

DV2000 (KAI) Not respond to power key

Кто сейчас на конференции