soulfly047 писал(а):
Цитата:
D1: Early super I/O initialization is done including RTC and keyboard controller.
Serial port is enabled at this point if needed for debugging. NMI is disabled.
Perform keyboard controller BAT test. Save power-on CPUID value in scratch
CMOS. Go to flat mode with 4GB limit and GA20 enabled.
D1 и 1D СОВСЕМ НЕ ОДНО И ТО ЖЕ!
мульты менял, севера менял... На одной матери помогла замена клокера. еще 3 штучки успешно забракованы, а жаль:-(