Hey all, i am here again becouse i have trouble with Lenovo G50-80 laptop , motherboard model NM-a362 rev 1.0

Laptop opened, EC got burned , IT8586e , replaced with new 8586e , no short, laptop has 20v input, 3.3v on battery connectors x3 and 1.9v x2 on other 2 connectors.

laptop starts, has 3.3v vs and 5v vs , but i do not get 1.5v / 1.35v for ram, or any cpu power.

i have flashed bios already , bios chip model was 25B64BVS from GigaDevice, my programmer does not have this model in its database so i have selected GigaDevice 25q64 and read the chip and programmed it with bios dump from this forum.

now, problem is , still same symptoms, will start, led comes on, no picture, no cpu power, no memory power.
i tried to program EC , but could not do it via SVOD programmer becouse it will not detect ITE chip. i do not know why.
says constantly, ITE not detected!


need help and instructions from an experienced member. thank you


edit: usb was defect, now detected ite, programmed ite with ec dump from this forum, and AGAIN, POWERS ON, NO DISPLAY, NO CPU / MEMORY VOLTAGE... smart pin 0.77v , please help.

edit:
ec pin 30 system power ok 3.3v
ec pin 97 pch power enable ok 3.3v
ec pin 99 pch power ok - 3.3v
ec pin 106 EC_ADAPTER_R - 0v


ps, i am looking schematics nm-362 v 1.0 with radeon gpu ,